The machine's view of time, if nanoseconds were seconds(plus.google.com)
plus.google.com
The machine's view of time, if nanoseconds were seconds
https://plus.google.com/112493031290529814667/posts/LvhVwngPqSC
15 comments
Actually, this sandwich analogy is not as good as the library/book one.
In this analogy, you are busy while you are making your sandwich (because you are putting it together from stuff you got from your fridge).
In the library-with-free-delivery-service analogy, you can do other work while you wait for data from the library/RAM to be delivered.
Modern superscalar processors can re-order non-dependent instructions while waiting on a memory lookup, and that is what the free-delivery-service aspect of the analogy illustrates.
In this analogy, you are busy while you are making your sandwich (because you are putting it together from stuff you got from your fridge).
In the library-with-free-delivery-service analogy, you can do other work while you wait for data from the library/RAM to be delivered.
Modern superscalar processors can re-order non-dependent instructions while waiting on a memory lookup, and that is what the free-delivery-service aspect of the analogy illustrates.
Very much agree. The analogy I'm used to (and use) is:
CPU = person (researcher at library) RAM = bounded physical space on desk Swap = cart for stacks Disk = the stacks (requiring scheduling of the elevator)
In my mind, the discussion of second/nanosecond is unimportant and makes this seem more technical than it needs to be to illustrate the point that "fetches from (non-SSD) disk are very slow and waste a lot of time." But this doesn't seem to be quite as focused as "A complete idiot's guide to the main components in a computer and what they do." (though I'm not sure that it's either time scales or components or SSD)
CPU = person (researcher at library) RAM = bounded physical space on desk Swap = cart for stacks Disk = the stacks (requiring scheduling of the elevator)
In my mind, the discussion of second/nanosecond is unimportant and makes this seem more technical than it needs to be to illustrate the point that "fetches from (non-SSD) disk are very slow and waste a lot of time." But this doesn't seem to be quite as focused as "A complete idiot's guide to the main components in a computer and what they do." (though I'm not sure that it's either time scales or components or SSD)
No! That version of the library analogy makes the ratios much too small.
CPU to main RAM: actually about 150:1; more like 30:1 in your analogy.
Main RAM to HD: actually about 200,000:1; more like 120:1 in your analogy.
The reason why "the discussion of second/nanosecond" is worth having is precisely that if you just say "very slow" and "a lot of time" then you're likely to think about ratios of the sort in your analogy, when the reality is much much much worse. (Extreme case: HD to CPU registers. Actual ratio: about 30 million to 1. Ratio in your analogy: about 4000 to 1.)
CPU to main RAM: actually about 150:1; more like 30:1 in your analogy.
Main RAM to HD: actually about 200,000:1; more like 120:1 in your analogy.
The reason why "the discussion of second/nanosecond" is worth having is precisely that if you just say "very slow" and "a lot of time" then you're likely to think about ratios of the sort in your analogy, when the reality is much much much worse. (Extreme case: HD to CPU registers. Actual ratio: about 30 million to 1. Ratio in your analogy: about 4000 to 1.)
> In my mind, the discussion of second/nanosecond is unimportant
I disagree. The second/nanosecond discussion illustrates the scale of the difference. I can understand the difference between a few seconds and a few years (just about), and it puts it into perspective.
> "fetches from (non-SSD) disk are very slow and waste a lot of time."
Saying "It's very slow" isn't very helpful. I want perspective. Also the point is that the time is perhaps not wasted is an interesting one.
The original analogy is intelligent, (accurate?) and puts this into perspective for developers (and potential SSD customers!).
I disagree. The second/nanosecond discussion illustrates the scale of the difference. I can understand the difference between a few seconds and a few years (just about), and it puts it into perspective.
> "fetches from (non-SSD) disk are very slow and waste a lot of time."
Saying "It's very slow" isn't very helpful. I want perspective. Also the point is that the time is perhaps not wasted is an interesting one.
The original analogy is intelligent, (accurate?) and puts this into perspective for developers (and potential SSD customers!).
CPU register: there is a bite of sandwich in your mouth.
More precisely, a few bits of sandwich
SSD - order sandwich ingredients online and wait for them to arrive (about a day, give or take)?
About a day is ~90 microseconds, which is really fast, even for an SSD. The FusionIO folks claim they can do 30 microseconds though, which is really incredible, just a couple hundred times slower than ram.
I wanted to say that that was within an order of magnitude to the cost of a simple system call, but it looks like system calls are much much faster than my intuition suggested[1], and they're in the range of RAM access.
1] http://stackoverflow.com/questions/1860253/what-is-the-overh...
I wanted to say that that was within an order of magnitude to the cost of a simple system call, but it looks like system calls are much much faster than my intuition suggested[1], and they're in the range of RAM access.
1] http://stackoverflow.com/questions/1860253/what-is-the-overh...
Looking at a random (2010) SSD review, it lists average read access times of less than 0.15 milliseconds = 150 microseconds for all of the SSDs involved. The long standing "gold standard" Intel X25-M had 70 μs.
http://www.tweaktown.com/reviews/3375/corsair_force_f120_120...
http://www.tweaktown.com/reviews/3375/corsair_force_f120_120...
Wow that's faster than the range I was working with. Will look into it, thanks for the info.
And yet, if you can wait three years for the first wooden
boat, it can often be at the head of a convoy which will
keep you busy for many thousands of years, sometimes even
orders of magnitude more if you take a minute to request
that another convoy sets out.
- James Gray
Thanks for posting. A very insightful analogy, really putting things into perspective.
Cool analogy. Makes a great reference point.
As an ASIC guy, I like to occasionally casually mention to software guys that at 3GHz, light travels about four inches in one clock cycle, and it frequently really blows their minds.
As an ASIC guy, I like to occasionally casually mention to software guys that at 3GHz, light travels about four inches in one clock cycle, and it frequently really blows their minds.
Worked on me. I had to do the math.
180,000mi/sec * 5280 * 12 = 11404800000 / 3,000,000,000 = 3.8inches.
Extending that a little further... on a 45mm i7 chip going from one end to the other and back would be ~3.5inches of travel. Gives me an idea of how much of a constraint packaging is.
180,000mi/sec * 5280 * 12 = 11404800000 / 3,000,000,000 = 3.8inches.
Extending that a little further... on a 45mm i7 chip going from one end to the other and back would be ~3.5inches of travel. Gives me an idea of how much of a constraint packaging is.
Didn't get any of that so had to redo in metric.
speed of light = 3 x 10^8 m/s
3 GHZ = 3 x 10^9 /s
So 3 x 10^8 / 3 x 10^9 = 0.1 metre = 10 centimetre = okay, 3.9 inches
But then metric always saves your ass. Back in physics class, they'd ask you how deep the well was if you dropped a stone & heard the water splash in 10 seconds. Before the American students could even begin their work, all the Indians would yell "500 metres!" And that's cause the gravitation constant is 10, so one half 10 times 10 times 10 is 500.
speed of light = 3 x 10^8 m/s
3 GHZ = 3 x 10^9 /s
So 3 x 10^8 / 3 x 10^9 = 0.1 metre = 10 centimetre = okay, 3.9 inches
But then metric always saves your ass. Back in physics class, they'd ask you how deep the well was if you dropped a stone & heard the water splash in 10 seconds. Before the American students could even begin their work, all the Indians would yell "500 metres!" And that's cause the gravitation constant is 10, so one half 10 times 10 times 10 is 500.
Generally agreed, but for this case I remember the speed of light as a foot per nanosecond, and the arithmetic is just dividing 12 by 3.
Maybe the Americans were busy incorporating the delay due to the finite speed of sound.
Is it just me that finds this suggestion offensive. Maybe the Indians had already thought about that and since they were already taking g as 10 m/sec^2, they thought that the difference because of sound delay would be insignificant. As would be the variability in speed of sound near the water surface due to moisture.
My response was designed to highlight the equally offensive suggestion that "all the Indians" were metric geniuses, while American students were all slow and ignorant of the metric system.
Too bad the gravitation constant is 9.8
Actually the gravitation constant is 6.67×10^-11 N m^2/kg^2. Gravitational acceleration on earths surface is on average 9.81 m/s^2, and not really a constant (it varies slightly from place to place).
A Core-i7 2600 has a die size of 216mm^2.[1] Assuming it's close to a square, that's about 14mm on each side. Electrical signals in a CPU travel almost at c, so at 3.4Ghz, signals can go across the die 6 times.
It's probably much less than that because paths in the CPU aren't straight lines. Also the i7 is a 4-core die, so it's unlikely that any signals need to go across the entire die in one clock. (Besides the clock signal, of course).
[1] http://en.wikipedia.org/wiki/List_of_Intel_Core_i7_microproc...
It's probably much less than that because paths in the CPU aren't straight lines. Also the i7 is a 4-core die, so it's unlikely that any signals need to go across the entire die in one clock. (Besides the clock signal, of course).
[1] http://en.wikipedia.org/wiki/List_of_Intel_Core_i7_microproc...
Back when I took a VLSI class my professor showed an awesome animation of clock distribution at various frequencies.
http://www.research.ibm.com/people/r/restle/Animations/DAC01...
Check out the animations under "Clock Distributions" (numbers 19 to 25. It shows how the propagation of the clock across the die is affected by frequency (When a part of the fabric/tree is up or down it represents 1 and 0 respectively).
My favorite is the SymTree and Non-Uniform SymTree (23 and 24) which shows how having a non uniform load at various parts of the chip and a fixed tree structure affects how long each part of the chip is at a 1 or 0 state (i.e. a low load part of the chip will spend more time at a stabilized 1 or 0, while a heavy capacitive load at one part can not even reach a true 1 or 0).
Check out the animations under "Clock Distributions" (numbers 19 to 25. It shows how the propagation of the clock across the die is affected by frequency (When a part of the fabric/tree is up or down it represents 1 and 0 respectively).
My favorite is the SymTree and Non-Uniform SymTree (23 and 24) which shows how having a non uniform load at various parts of the chip and a fixed tree structure affects how long each part of the chip is at a 1 or 0 state (i.e. a low load part of the chip will spend more time at a stabilized 1 or 0, while a heavy capacitive load at one part can not even reach a true 1 or 0).
propagation of an electromagnetic field in copper is actually only 75% of c, it's a significant factor in processor speed
Btw, you can drop this into Google: lightsecond / 3e9 in inches: 1 lightsecond / 3e9 = 3.93428423 inches
I really liked this. This is the first instance of a time scale for computing that really made sense for me. It's a really good mental metaphor that cleared up how computers work in a way to this script kiddie.
Extending that thought to multiple cores/threads. Comparable to a small business in a way? You have one guy who can go tell other people to do certain tasks. They take anywhere from a few minutes to a few hours. You can set it up so that there is a task list of things for people to do so that you don't have to continually reassign each one, just tell them to pick up the next thing to do. It's much harder and requires more organization, but ultimately, like the division between a small business and a one man show, you get more shit done with multiple people/threads/cores working in parallel than one single unit working by themselves.
Thanks for posting this.
Extending that thought to multiple cores/threads. Comparable to a small business in a way? You have one guy who can go tell other people to do certain tasks. They take anywhere from a few minutes to a few hours. You can set it up so that there is a task list of things for people to do so that you don't have to continually reassign each one, just tell them to pick up the next thing to do. It's much harder and requires more organization, but ultimately, like the division between a small business and a one man show, you get more shit done with multiple people/threads/cores working in parallel than one single unit working by themselves.
Thanks for posting this.
>Extending that thought to multiple cores/threads. Comparable to a small business in a way? You have one guy who can go tell other people to do certain tasks.
Depends on the architecture, actually. What you're describing is a lot like the Cell processor design. For x86-based processors, it's much less organized than that, because each core is, for all intents and purposes, effectively an independent processor.
The best analogy for multithreaded programming I've come up with is a(take a drink) car factory. Each core is a generalized assembly line that is capable of producing any part, but it takes time to switch to a different task. The end goal is a car, which means that you can have one core working on the transmission, one core working on the interior parts, one on the exhaust, and one working on the motor. If you can balance them out, you can have all of them finish around the same time. But if you're trying to actually make a car, you're going to end up with some overhead to finish the entire thing. There is some overhead where the body is made, and all the parts that were produced by the other lines are actually put into the car.
Compared to a single-assembly line factory, it's possible to make cars much faster with multiple lines. But there will always be some percentage of time that you cannot split across multiple cores.
Depends on the architecture, actually. What you're describing is a lot like the Cell processor design. For x86-based processors, it's much less organized than that, because each core is, for all intents and purposes, effectively an independent processor.
The best analogy for multithreaded programming I've come up with is a(take a drink) car factory. Each core is a generalized assembly line that is capable of producing any part, but it takes time to switch to a different task. The end goal is a car, which means that you can have one core working on the transmission, one core working on the interior parts, one on the exhaust, and one working on the motor. If you can balance them out, you can have all of them finish around the same time. But if you're trying to actually make a car, you're going to end up with some overhead to finish the entire thing. There is some overhead where the body is made, and all the parts that were produced by the other lines are actually put into the car.
Compared to a single-assembly line factory, it's possible to make cars much faster with multiple lines. But there will always be some percentage of time that you cannot split across multiple cores.
Ahhhh. There is a nonzero cost for going about organizing all the tasks. No matter how many ways you can divide the task, even if you don't actually divide it up, there is always a nonzero time at the end that you have to everything on hand to make the final product. Is that a good way of thinking about it?
I've done used this analogy in reverse. My roommate was also a CS PhD student, and I explained that when it comes to toilet paper, we can't afford to let cache misses go to disk.
Wow. I've been doing low-level work where I have to intimately understand computer architecture and optimization work where every nanosecond counts for as long as I can remember, but I've never put it into perspective. This is awesome.
OCZ Vertex 3's have been pounded for reliability problems[4], so much so that they've just started a special deal on Newegg [2]. And coincidentally, I'm sure, a jolly story about "a machine's view of time" replete with olde-worlde charm, shows up on the front page of a major tech site, and oh, by the way, let me end by saying "I use OCZ Vertex 3's"...
Tom's Hardware suggests that Crucial's m4 series are faster than OCZ Vertex 3's, and don't come with a horrendous approval rating. A 256Gb m4 is $319 on newegg [1].
Intel's new 520 SSDs appear to have given them a proper SSD instead of the floppy-disc-like performance of the 510.[3] Though its $499 for 240gb. [5]
All drives have failures, and while it sucks to be the one that gets the dodgy drive, there will always be someone who can post "it didn't work for me". However, the OCZ Vertex have an unusually high number of "It didn't work for me" reviews. Is it a stitch-up? It'd be easy for "a motivated third party" to buy 27 drives off newegg and post negative reviews. It'd also be in OCZ's interest to fan the flames of doubt on the SF2281 as they are releasing new SSDs based on their own, newly-purchased, Indilinx controllers. But taking off the tin-foil hat, it does look like Vertex 3's have problems.
[1] http://www.newegg.com/Product/Product.aspx?Item=N82E16820148...
[2] http://promotions.newegg.com/OCZ/022912/index.html?cm_sp=Cat...
[3] http://www.tomshardware.co.uk/ssd-520-sandforce-review-bench...
[4] http://www.newegg.com/Product/Product.aspx?Item=20-227-707&#...
[5] http://www.newegg.com/Product/Product.aspx?Item=N82E16820167...
Tom's Hardware suggests that Crucial's m4 series are faster than OCZ Vertex 3's, and don't come with a horrendous approval rating. A 256Gb m4 is $319 on newegg [1].
Intel's new 520 SSDs appear to have given them a proper SSD instead of the floppy-disc-like performance of the 510.[3] Though its $499 for 240gb. [5]
All drives have failures, and while it sucks to be the one that gets the dodgy drive, there will always be someone who can post "it didn't work for me". However, the OCZ Vertex have an unusually high number of "It didn't work for me" reviews. Is it a stitch-up? It'd be easy for "a motivated third party" to buy 27 drives off newegg and post negative reviews. It'd also be in OCZ's interest to fan the flames of doubt on the SF2281 as they are releasing new SSDs based on their own, newly-purchased, Indilinx controllers. But taking off the tin-foil hat, it does look like Vertex 3's have problems.
[1] http://www.newegg.com/Product/Product.aspx?Item=N82E16820148...
[2] http://promotions.newegg.com/OCZ/022912/index.html?cm_sp=Cat...
[3] http://www.tomshardware.co.uk/ssd-520-sandforce-review-bench...
[4] http://www.newegg.com/Product/Product.aspx?Item=20-227-707&#...
[5] http://www.newegg.com/Product/Product.aspx?Item=N82E16820167...
I have exactly 0 hardware manufacture connections. I give you my word that this was just a fun post that I've been thinking about off and on for a long time. No one influenced me to write the post at all, in any way.
Why did I recommend the OCZ? AnandTech writes about OCZ products a lot, and I trust them. I wrote the post a few days ago thinking that mostly my friends would read it. It only occurred to me today to post it on hacker news, when I saw that I got like 7 +1s from friends.
Why did I recommend the OCZ? AnandTech writes about OCZ products a lot, and I trust them. I wrote the post a few days ago thinking that mostly my friends would read it. It only occurred to me today to post it on hacker news, when I saw that I got like 7 +1s from friends.
This AnandTech?
"Back in October SandForce announced that it had discovered a firmware issue that resulted in unexpected BSODs on SF-2281 drives on certain platforms. Why it took SandForce several months to discover the bug that its customers had been reporting for a while is a separate issue entirely. SandForce quickly pushed out the firmware to OCZ and other partners. Our own internal testing revealed that the updated firmware seemed to have cured the infamous BSOD."
Yay!
"As luck would have it, our own Brian Klug happened to come across an unexpected crash with his 240GB non-Intel SF-2281 based SSD two weeks ago when he migrated it to another machine. The crash was an F4 BSOD, similar in nature to the infamous BSOD issue from last year."
Oh. This was written 2/6/12.
...
"Whatever Intel has done with the 520's firmware seems to have fixed problems that still remain in the general SF-2281 firmware."
...
"While it's nearly impossible to prove most of this, the fact that we're still able to reproduce a BSOD on the latest publicly available SF-2281 firmware but not on the SF-2281 based Intel SSD 520 does say a lot about what you're paying for with this drive."
http://www.anandtech.com/show/5508/intel-ssd-520-review-cher...
"Back in October SandForce announced that it had discovered a firmware issue that resulted in unexpected BSODs on SF-2281 drives on certain platforms. Why it took SandForce several months to discover the bug that its customers had been reporting for a while is a separate issue entirely. SandForce quickly pushed out the firmware to OCZ and other partners. Our own internal testing revealed that the updated firmware seemed to have cured the infamous BSOD."
Yay!
"As luck would have it, our own Brian Klug happened to come across an unexpected crash with his 240GB non-Intel SF-2281 based SSD two weeks ago when he migrated it to another machine. The crash was an F4 BSOD, similar in nature to the infamous BSOD issue from last year."
Oh. This was written 2/6/12.
...
"Whatever Intel has done with the 520's firmware seems to have fixed problems that still remain in the general SF-2281 firmware."
...
"While it's nearly impossible to prove most of this, the fact that we're still able to reproduce a BSOD on the latest publicly available SF-2281 firmware but not on the SF-2281 based Intel SSD 520 does say a lot about what you're paying for with this drive."
http://www.anandtech.com/show/5508/intel-ssd-520-review-cher...
Point taken; recommendation withdrawn. For the record I ordered my drive on the 4th, before that article was posted and after, I'd believed, those issues were resolved.
I don't expect that I'll receive an apology for being called an unethical shill.
I'd still love to see some statistics on failure rates. All this anecdata is obnoxious for a buyer to wade through.
I don't expect that I'll receive an apology for being called an unethical shill.
I'd still love to see some statistics on failure rates. All this anecdata is obnoxious for a buyer to wade through.
I apologize for calling you an unethical shill.
I bought an Intel 510 120GB SSD for my iMac before Christmas. I chose it over the Vertexes/Agility models because of the supposed HW quality.
After the 6th time of it corrupting various parts of my filesystem (often the catalogue and other important parts), I'm returning it to Amazon.
It was twice as annoying because I had to re-rip open my iMac to get at it. I think I will be exchanging it for an OWC Mercury Extreme.
After the 6th time of it corrupting various parts of my filesystem (often the catalogue and other important parts), I'm returning it to Amazon.
It was twice as annoying because I had to re-rip open my iMac to get at it. I think I will be exchanging it for an OWC Mercury Extreme.
That's too bad... I have the same SSD from last June and it's been running in my Windows machine without a problem. I don't think I'll be getting a computer without an SSD in the future.
I guess hardware roulette with storage still has the worst odds...
I guess hardware roulette with storage still has the worst odds...
Seriously? The first think you think of is "conspiracy"?
Less jumping to conclusions, please.
Less jumping to conclusions, please.
Yay for jumping right to conspiracy theories without doing any research at all!
I've owned 5 SSD's over the past 3 years. 2 OCZ, 2 crucial, 1 intel. Both OCZs failed, one after a month the other after 9 months. The oldest, a 3 year old crucial is still working fine.
Nice analogy. From a technical standpoint, however, access patterns often make a bigger difference than the type of your storage device. The difference between sequential access on disk and sequential access on SSD isn't nearly as big as random access on disk compared to sequential access on disk.
But the order of magnitude between disk and ram is so large that sequential versus random access on hard drives doesn't matter that much in comparison.
Well, it depends on the hard drives you're using, and the exact access pattern, but sequential access to disk can be even faster than random access to RAM.[0] This of course doesn't really matter to average Joe, since he has little influence on how data is read from his disk. But if you're say, a database developer, it does matter quite a bit.
[0] http://dl.acm.org/citation.cfm?id=1536616.1536632
[0] http://dl.acm.org/citation.cfm?id=1536616.1536632
To me this evoked the image of a monk doing work in a monastery with a huge library. If you picture this monk as your CPU, and assume he works 12 hours every day, over a lifespan of 60 years, thats about the work a 1GHz CPU is capable of doing every second.
Nice analogy :-). If only SSD's had the storage capacity of a typical hard drive...
By the way, get an Intel or a Samsung when your Vertex fails...
By the way, get an Intel or a Samsung when your Vertex fails...
You can get a 200+GB SSD for a reasonable price. And while it might not sound like it 200+GB is a LOT of data. Chances are it's going to hold everything except some media files (Music / Movies). But you can cheaply store them on a HDD or a remote file server. And once you have that file server you can cheaply play those movies at any computer or any PS3/XBOX/iPad/Boxee (etc) in your house which is really nice. So, while it might cost a little extra and take a little more work there is a lot to be said for going down the SSD path.
Of course you can also get a smaller SSD and or use it as your only disk drive, but they do really make that old file server idea really appealing especially if you have more than one computer.
Of course you can also get a smaller SSD and or use it as your only disk drive, but they do really make that old file server idea really appealing especially if you have more than one computer.
Use both. But the OS and application files on the smallish SSD, and the data on the hard disk. Most "active" data can easily fit in 64G. The rest is stuff that is not accessed often enough to need the speed of an SSD.
You can get a 200+GB SSD for a reasonable price. And while it might not sound like it 200+GB is a LOT of data. Chances are it's going to hold everything except some media files (Music / Movies). But you can cheaply store them on a HDD or a remote file server. And once you have that file server you can cheaply play those movies at any computer or any PS3/XBOX/iPad/Boxee (etc) in your house which is really nice. So, while it might cost a little extra and take a little more work there is a lot to be said for going down the SSD path.
Of course you can also get a smaller SSD and or use it as your only disk drive, but they do really make that old file server idea really appealing especially if you have more than one computer.
And about 5000 years for the great user in the sky to notice something you produce/do.
Actually 30 years or so for one human-second. (Rule of thumb for that: pi seconds is a nanocentury.)
Hey, yeah, how did I get an extra block of "000" on my number with just a copy and paste? Sorry everyone.
Anyway, I was going for human reaction time of about 0.15sec real world. So about 4.75 years in the analogy.
Anyway, I was going for human reaction time of about 0.15sec real world. So about 4.75 years in the analogy.
Wouldn't it be great if I could just click on a file system object (like a drive in the file browser) and view a diagram of concentric circles for registers, cache, ram, io layer (disk buffers/caches), and finally the actual physical device.
The size of each circle would be relative to the avg. amount of time needed to move data to the CPU. To me this would be more intuitive than charting system data.
The size of each circle would be relative to the avg. amount of time needed to move data to the CPU. To me this would be more intuitive than charting system data.
I think this is in error. The delivery times for SSDs are correct, if you only consider the periods when the SSD is working. When the SSD fails, the delivery time comparison is the AGE OF THE SUN. Ok, I kid. You never get your data. So, lets call "Age of the sun" an average between really fast and infinity.
I've owned 3 SSDs and have had 2 failures, so far, over 2 years[1]. In the past 20 years, I've owned around 100 hard drives and have had only 4 failures.
This is the achilles heel of the SSD for me. I've gone back to spinning rust because I need the reliability more than I need the performance.
The performance was nice, very nice. But having to restore from backup is something that I do not like doing every year. I'd like to do it once a decade or less.
Until then, I'm no longer using SSDs.
I did a bunch of research into why SSDs fail and inevitably it seems to be software bugs due to the SSDs being clever. I suspect the Samsung SSDs that Apple uses are not clever and thus do not fail. I will use an SSD if it comes with an Apple warranty. But I had an intel SSD fail, and I had a Sandforce based SSD fail. Both catastrophically with zero data recovery (fortunately I had backed up, though in both cases I lost a couple hours of work for various reasons.) In both cases, near as I can tell, the SSD had painted itself into a corner-- it actually hadn't been used enough to have flash failures sufficient to be a problem, let alone in excess of the extra capacity set aside. Nope, it was a management problem for the controller that caused the failures. These kinds of problems can be worked out by the industry, but give that the market has existed for 3-4 years now and we're still having these kinds of problems, I'm going to wait before trying something clever again.
[1] The one that is still working is in my cofounders machine, and I'm dreading the day that it too fails. I am afraid it is just a matter of time, and as soon as we can reshuffle things they'll be using spinning rust again as well.
I've owned 3 SSDs and have had 2 failures, so far, over 2 years[1]. In the past 20 years, I've owned around 100 hard drives and have had only 4 failures.
This is the achilles heel of the SSD for me. I've gone back to spinning rust because I need the reliability more than I need the performance.
The performance was nice, very nice. But having to restore from backup is something that I do not like doing every year. I'd like to do it once a decade or less.
Until then, I'm no longer using SSDs.
I did a bunch of research into why SSDs fail and inevitably it seems to be software bugs due to the SSDs being clever. I suspect the Samsung SSDs that Apple uses are not clever and thus do not fail. I will use an SSD if it comes with an Apple warranty. But I had an intel SSD fail, and I had a Sandforce based SSD fail. Both catastrophically with zero data recovery (fortunately I had backed up, though in both cases I lost a couple hours of work for various reasons.) In both cases, near as I can tell, the SSD had painted itself into a corner-- it actually hadn't been used enough to have flash failures sufficient to be a problem, let alone in excess of the extra capacity set aside. Nope, it was a management problem for the controller that caused the failures. These kinds of problems can be worked out by the industry, but give that the market has existed for 3-4 years now and we're still having these kinds of problems, I'm going to wait before trying something clever again.
[1] The one that is still working is in my cofounders machine, and I'm dreading the day that it too fails. I am afraid it is just a matter of time, and as soon as we can reshuffle things they'll be using spinning rust again as well.
Reliability is an issue for me, but in my workstation I need speed more than I need five 9's. So I have a Vertex 2 and a 750Gb HDD in the DVD space using an OptiBay [1]. Time Machine backs up the SSD to the HDD with room to spare. I have a bunch of "old" disks that I can drop in and start using immediately (the HDD in the bay is the original boot drive in fact). And all my code is in remote repos if I lose the whole thing. I find I'm regularly (every 9 months or so) upgrading my disk, and in fact the Vertex 2 is probably the longest I've gone without upgrading.
[1] http://www.mcetech.com/optibay/
[1] http://www.mcetech.com/optibay/
HP sell SSDs with guaranteed numbers of write cycles that will tell you when they're going to fail, but they aren't cheap. It's one of those cases where there are markedly better options available in the server space than for consumers.
I've also had both SandForce and Intel (310, 320, 520, and 710!) SSDs fail -- the issue is not running out of cycles (which could be predicted, or mitigated by buying more Enterprise style SSDs), but rather weird controller errors.
One (milli-)second the drive is totally fine, then the next it is just gone. Magnetic disks usually give some warning, and usually fail for mechanical vs. controller reasons.
I still use SSDs, but am constantly wary, especially in the first month of a new drive's service.
One (milli-)second the drive is totally fine, then the next it is just gone. Magnetic disks usually give some warning, and usually fail for mechanical vs. controller reasons.
I still use SSDs, but am constantly wary, especially in the first month of a new drive's service.
I've found Intel Smart Response an acceptable compromise. You get close to the performance of SSD with the space, reliability, and recoverability of magnetic storage.
I like the compromise approach as well, but in the drive so it works with anything:
http://www.tomshardware.com/reviews/hybrid-hard-drive-flash-...
http://www.tomshardware.com/reviews/hybrid-hard-drive-flash-...
I haven't seen any of these fail:
http://www.tomshardware.com/reviews/hybrid-hard-drive-flash-...
http://www.tomshardware.com/reviews/hybrid-hard-drive-flash-...
I've had SSDs failing every couple of months. I don't care because I have redundancy. I never had to restore from backup, I didn't even had to reboot my servers.
L1 - You've already started eating the sandwich, and only need to move your mouth and take another bite. (2 seconds)
L2 - There is a sandwich on the counter, so you need only find it, pick it up, and begin eating. (10 seconds)
RAM - You're near the fridge, but you need to open it and quickly throw together a sandwich. (3 minutes)
HD - Drive to store, purchase seeds, grow seeds, harvest etc. (1 year)
http://www.reddit.com/r/programming/comments/90tge/hey_rprog...
http://news.ycombinator.com/item?id=702713