Level Up Your Shell Game(viget.com)
viget.com
Level Up Your Shell Game
http://viget.com/extend/level-up-your-shell-game
49 comments
A complementary tip for Ctr+R is to tag long reusable commands with a comment in the end, e.g.,
find . -name "*.png" -print0 | xargs -0 -P8 pngquant --ext .png --force 256 #optimizepng
(if you’re using zsh, you have to enable INTERACTIVE_COMMENTS option first; just run set -k)
find . -name "*.png" -print0 | xargs -0 -P8 pngquant --ext .png --force 256 #optimizepng
(if you’re using zsh, you have to enable INTERACTIVE_COMMENTS option first; just run set -k)
Cool tip, did not know that, though I prefer to put long reusable commands in script files, in part so I can comment them to better remember what everything is doing.
Thanks! I didn't know about INTERACTIVE_COMMENTS.
Adding a comment there is a neat trick. It also works with bang searches (!?), almost like creating a temporary ad-hoc alias:
Adding a comment there is a neat trick. It also works with bang searches (!?), almost like creating a temporary ad-hoc alias:
find . -name "*.png" -print0 | xargs -0 -P8 pngquant --ext .png --force 256 #optimizepng
... many other commands, time passes ...
!?optimizepngSince I've switched to zshell, I've found that I haven't used Ctrl-r much at all. The intelligent history feature does it for me. For example:
If earlier I had a long command like `mvn clean test && mvn deploy -P release`, I can just type `mvn v` and press up on the arrows. zsh will present only history entries that start with what I've typed. Insanely useful!
If earlier I had a long command like `mvn clean test && mvn deploy -P release`, I can just type `mvn v` and press up on the arrows. zsh will present only history entries that start with what I've typed. Insanely useful!
C-s moves forward in history, but you have to type it twice to begin with, once to toggle the mode, and once to actually move forward.
Backspace normally just deletes the last character in your incremental search string.
And be sure that C-s / C-q aren't set up for terminal flow control with something like:
Backspace normally just deletes the last character in your incremental search string.
And be sure that C-s / C-q aren't set up for terminal flow control with something like:
stty start undef stop undefMany of the solutions they highlight can actually be solved with this. Surprised that it wasn't included.
IMO the aliases for git should be in ~/.gitconfig instead. I have a bunch of these, like:
A tweak to the "editbash" suggested alias will make it so that you don't have to reopen your terminal. My equivalent alias is "vif", for "vi .functions":
Lastly: brevity is king. I love 'alias psgrep="ps aux | grep"', since I use it several times a day, but to "level up your shell game", keep it short. My alias for this command is "psg". The other alias that I use all the time is "d" -- "alias d='ls -lFh --color --group-directories -v'".
[alias]
br = branch
co = checkout
ci = commit -v
sci = svn dcommit --interactive
cp = cherry-pick
l = log --pretty=oneline --abbrev-commit
l3 = log --pretty=oneline --abbrev-commit -n3
lm = log --pretty=oneline --abbrev-commit master..
rc = rebase --continue
st = status -sb
squash = !git rebase -i --autosquash $(git merge-base master HEAD)
if [ -f ~/.functions ]; then . ~/.functions; fi
A tweak to the "editbash" suggested alias will make it so that you don't have to reopen your terminal. My equivalent alias is "vif", for "vi .functions":
alias vif='vi ~/.functions; . ~/.functions'
Lastly: brevity is king. I love 'alias psgrep="ps aux | grep"', since I use it several times a day, but to "level up your shell game", keep it short. My alias for this command is "psg". The other alias that I use all the time is "d" -- "alias d='ls -lFh --color --group-directories -v'".
Did you know you can make your own git commands, and I don't mean just aliases?
Write a script called git-mycommand, and you can invoke it with 'git mycommand'. Tab completion works too, at least for bash + bash_completion.
Write a script called git-mycommand, and you can invoke it with 'git mycommand'. Tab completion works too, at least for bash + bash_completion.
Yes, I have written some of those too. Just make sure the script is in your PATH. I drop them in ~/bin/ -- which reminds me of another thing you should have in your ~/.bash_profile, if it isn't already in the template provided by your system:
if [ -d $HOME/bin ]
then
PATH=$PATH:$HOME/bin
fi[deleted]
My favorite shell trick (not in the link) is this: ~-
Tilde-hyphen expands to the previous directory you were in, and of course "cd -" returns you to your previous directory, so I put them together all the time.
Here's an example workflow (with a fake PS1):
<disclaimer>
That's bit of a contrived example above. Here's a more realistic way to do a symlink for pow:
Tilde-hyphen expands to the previous directory you were in, and of course "cd -" returns you to your previous directory, so I put them together all the time.
Here's an example workflow (with a fake PS1):
mac:/Users/me/Projects/my_new_app$ cd ~/.pow
mac:/Users/me/.pow$ ln -s ~- .
mac:/Users/me/.pow$ cd -
mac:/Users/me/Projects/my_new_app$
<disclaimer>
That's bit of a contrived example above. Here's a more realistic way to do a symlink for pow:
mac:/Users/me/Projects/my_new_app$ ln -s `pwd` ~/.pow/
Save the earth, fork less:
ln -s $PWD ~/.pow
The command line navigation commands are just what any Emacs user would expect. vi users can set their $EDITOR to 'vi' to get those commands.
What do you mean you've never used Emacs? mumble whippersnappers mumble
What do you mean you've never used Emacs? mumble whippersnappers mumble
Use `set -o vi` to get vi navigation commands on the command line.
EDIT: In bash, that is. It's `bindkey -v` in zsh.
EDIT: In bash, that is. It's `bindkey -v` in zsh.
Do it in .inputrc like this:
set editing-mode vi
Now any executable that uses readline will have vi editing commands on its command line. mysql, psql, etc.
Do as much of your command line editing configuration in .inputrc as possible, and you'll have it everywhere.
EDIT: man readline
set editing-mode vi
Now any executable that uses readline will have vi editing commands on its command line. mysql, psql, etc.
Do as much of your command line editing configuration in .inputrc as possible, and you'll have it everywhere.
EDIT: man readline
set -o vi works in zsh as well.
Everything you ever wanted to know about SSH keys but were afraid to ask:
http://www.ibm.com/developerworks/opensource/library/l-keyc/...
http://webcache.googleusercontent.com/search?q=cache:n5M47jV...
http://webcache.googleusercontent.com/search?q=cache:BzFiI_7...
(pt2/pt3 borked on IBMs site)
http://www.ibm.com/developerworks/opensource/library/l-keyc/...
http://webcache.googleusercontent.com/search?q=cache:n5M47jV...
http://webcache.googleusercontent.com/search?q=cache:BzFiI_7...
(pt2/pt3 borked on IBMs site)
It's probably worth mentioning that all the delete functions he points out(all of them for that matter, ctrl-k, etc) are actually cut's, so you can paste them back as well.
I find Ctrl-u especially useful when I'm halfway through with a command, then I realize I wanted to do something else before executing said command, so I cut it- then paste it back when I need it.
* Ctrl + y to paste anything back
readline also seems to have a "kill ring":
$ aaa ^U
# now "aaa" is the only thing in the kill ring
$ bbb ^U
# now kill ring is ["aaa", "bbb"]
$ ccc ^U
# now kill ring is ["aaa", "bbb", "ccc"]
$ ^Y
$ ccc
# alt+y cycles through the kill ring
$ bbb Alt+Y
$ aaa Alt+Y
$ ccc Alt+Y
$ bbb
> Note: you’ll need to open a new Terminal window for changes in ~/.bash_profile to take place.
Alternatively, you can just do '. ~/.bash_profile' or 'source ~./bash_profile'.
Alternatively, you can just do '. ~/.bash_profile' or 'source ~./bash_profile'.
alias refresh-bash="source ~/.bash_profile"When you execute a command that takes a long time to run and you want to send it to the background you can do:
ctrl + z
then, to send it to the background:
bg
and, to get it back from the background:
fg
Also, I really like to use "for", like:
// get the size of each file or directory in the current directory
for i in `ls -1`; do du -hs $i; done;
ctrl + z
then, to send it to the background:
bg
and, to get it back from the background:
fg
Also, I really like to use "for", like:
// get the size of each file or directory in the current directory
for i in `ls -1`; do du -hs $i; done;
I don't understand your last line. How is it different to "for i in *; blah"? Or even just "du -hs ."?
It was just an example...
instead of "ls -1" you could use any other command that returns a list
The "du -hs ." will only return the size of the current directory, but that was also an example. You could use any other command that you wanted to perform over each item in the list returned by the first command.
Not sure if this is clear enough, please let me know.
instead of "ls -1" you could use any other command that returns a list
The "du -hs ." will only return the size of the current directory, but that was also an example. You could use any other command that you wanted to perform over each item in the list returned by the first command.
Not sure if this is clear enough, please let me know.
Interestingly, relatedly, a lot of the emacs style keybindings (ctrl-a, ctrl-e, ctrl-k, etc) are system-wide in OSX. I prefer vim as my daily editor, but it is often useful. You can also make the bindings even more emacsy if you want.
http://irreal.org/blog/?p=2063
http://irreal.org/blog/?p=2063
There’s a link to one of the related files from your link, but folks might also find the rest of my article about this from 2006 interesting:
http://www.hcs.harvard.edu/~jrus/site/cocoa-text.html
Also cf.:
http://www.hcs.harvard.edu/~jrus/site/system-bindings.html
http://www.hcs.harvard.edu/~jrus/site/selectors.html
https://github.com/jrus/cocoa-text-system/tree/master/KeyBin...
http://www.hcs.harvard.edu/~jrus/site/cocoa-text.html
Also cf.:
http://www.hcs.harvard.edu/~jrus/site/system-bindings.html
http://www.hcs.harvard.edu/~jrus/site/selectors.html
https://github.com/jrus/cocoa-text-system/tree/master/KeyBin...
aliasing git shortcuts seems more appropriate for git config:
https://git.wiki.kernel.org/index.php/Aliases
...after aliasing git to 'g' in your shell config, of course :)
https://git.wiki.kernel.org/index.php/Aliases
...after aliasing git to 'g' in your shell config, of course :)
alias g='git'Then you need a space after the g.
[deleted]
I prefer to use inputrc instead of aliases. Put the following into your .inputrc
"\C-gs": "git status -sb "
They should really mention which shell and terminal emulator they are using. Not everyone is using the same "Unix command line".
Fair point. FWIW, we're all on OS X, running bash, zsh, or fish on either Terminal.app or iTerm2.
Control-Left and Right switch workspaces for me. A giant pain in the ass, because the normal word-jump shortcut, Option-Left/Right, just drops a [C/[D into the shell on iTerm. The stupid thing is, if I shell into an Ubuntu machine, it works fine.
You can probably set that up in .inputrc. Pressing Ctrl-V in a terminal before pressing your ctrl+left or ctrl+right arrow will type the initial escape character literally so you can see what the key sequence is (e.g. something like \e[1;5D).
Alternatively, you could change your workspace bindings to Control+[some other modifier].
Alternatively, you could change your workspace bindings to Control+[some other modifier].
Here is a rule for how to level up your shell/editing game. If you ever touch your arrow keys, you are doing something wrong.
> ctrl + left arrow Moves the cursor to the left by one word > ctrl + right arrow Moves the cursor to the right by one word
Alt + b and Alt + f are also aliases for the same action.
> ctrl + left arrow Moves the cursor to the left by one word > ctrl + right arrow Moves the cursor to the right by one word
Alt + b and Alt + f are also aliases for the same action.
I like the commands, especially the ssh one, which I didn't know before and will certainly use in the future.
I also enjoyed the format of the article. A whole dev team each contributing their own piece to a blog post provides a lot of different voices and styles in a concise way.
I also enjoyed the format of the article. A whole dev team each contributing their own piece to a blog post provides a lot of different voices and styles in a concise way.
I knew about the sudo !! but the sudo !$ will come in handy! thanks!
ctrl + l
to clear the screen, instead of typing "clear" is pretty useful too.
to clear the screen, instead of typing "clear" is pretty useful too.
Ctrl-r = reverse history search. Type a partial command after Ctrl-r and it'll find the most recent executed command with that substring in it.
Press Ctrl-r again, jump to the next oldest command containing your substring. Did you accidentally press too many Ctrl-r? Press backspace to move forward in history.