A skeptical response to Musk's hyperloop(pedestrianobservations.wordpress.com)
pedestrianobservations.wordpress.com
A skeptical response to Musk's hyperloop
http://pedestrianobservations.wordpress.com/2013/08/13/loopy-ideas-are-fine-if-youre-an-entrepreneur/
19 comments
> This is obvious from the kind of nitpicking that goes on (no references! 4.37 m/s^2 is the maximum motion sickness possible because an accredited expert proposed it; I've never seen 4.9 m/s^2, but it's surely a barf comet!)
This isn't nitpicking. Dealing with the acceleration around curves is going to be a problem for any transit system and at higher speeds it becomes a bigger problem. Unlike bathrooms, this is going to be intrinsic to any system that carries human beings. As the author points out that the hyperloop proposal has significantly higher acceleration than any other high-speed system that he knows about.
So, how did the hyperloop designers decide that 4.9 m/s^2 would be safe? Did they find some study which tested this level of acceleration on average people? Did they conduct their own study which overturned conventional wisdom? Did they look at the research which led to the 4.37 m/s^2 figure and determine that it was fatally flawed? This is a critical issue and if the designers don't explain themselves, then it's fair to assume they made it up.
The hyperloop proposal contains innovative elements (air suspension in evacuated tubes) and elements which are essentially common with many other transit systems (viaducts, human passengers). The designers deserve credit for the former, but they can't sweep the details of the latter under the rug. The point of references is not stylistic and not to name-check previous work. The point is that when you're doing something, which has had lots of previous research, you either use that research to justify your claims or you explain why yours will be different.
> The really interesting, constructive questions: does this low-pressure air cushion thing really work? what are some factors that we need to explore to determine its true efficiency?
Those are interesting questions and if Musk had proposed just the air cushion technology, then that's all we would be talking about. People would build test pieces to validate the technology and then go looking for applications. Instead, Musk choose to also include a specific proposal for a replacement for the LA-SF high-speed rail line and to estimate the costs at a tenth as much. That's what got the most media attention and so that's the aspect the OP chose to criticize.
BTW, you seem to be implying that the OP is a civil engineer or a transportation engineer with an axe to grind, but he's just an amateur and if you look at his other posts you'll see that he has a lot of concerns for reducing the costs of infrastructure projects.
This isn't nitpicking. Dealing with the acceleration around curves is going to be a problem for any transit system and at higher speeds it becomes a bigger problem. Unlike bathrooms, this is going to be intrinsic to any system that carries human beings. As the author points out that the hyperloop proposal has significantly higher acceleration than any other high-speed system that he knows about.
So, how did the hyperloop designers decide that 4.9 m/s^2 would be safe? Did they find some study which tested this level of acceleration on average people? Did they conduct their own study which overturned conventional wisdom? Did they look at the research which led to the 4.37 m/s^2 figure and determine that it was fatally flawed? This is a critical issue and if the designers don't explain themselves, then it's fair to assume they made it up.
The hyperloop proposal contains innovative elements (air suspension in evacuated tubes) and elements which are essentially common with many other transit systems (viaducts, human passengers). The designers deserve credit for the former, but they can't sweep the details of the latter under the rug. The point of references is not stylistic and not to name-check previous work. The point is that when you're doing something, which has had lots of previous research, you either use that research to justify your claims or you explain why yours will be different.
> The really interesting, constructive questions: does this low-pressure air cushion thing really work? what are some factors that we need to explore to determine its true efficiency?
Those are interesting questions and if Musk had proposed just the air cushion technology, then that's all we would be talking about. People would build test pieces to validate the technology and then go looking for applications. Instead, Musk choose to also include a specific proposal for a replacement for the LA-SF high-speed rail line and to estimate the costs at a tenth as much. That's what got the most media attention and so that's the aspect the OP chose to criticize.
BTW, you seem to be implying that the OP is a civil engineer or a transportation engineer with an axe to grind, but he's just an amateur and if you look at his other posts you'll see that he has a lot of concerns for reducing the costs of infrastructure projects.
I agree that it's important to talk about motion sickness. I was pointing out that the way the article deals with it (remarking that the proposed system may involve 12% higher lateral accelerations than HSR, and instantly dismissing it as a "barf ride") is inadequate. Here are a few questions that I don't know the answer to, but seem a lot more interesting:
- Do we have studies that estimate the effect of lateral acceleration on motion sickness? What do they indicate (e.g. 0.1% of passengers get it at 4 m/s^2, 2% at 5 m/s^2 etc.)?
- To what extent is motion sickness in HSR comparable to the proposed system? Are the differences (no outside visibility, different vibrations model, possibly different seating) significant and if so how?
- To what extent do potential passengers care about motion sickness? Has anyone compared cost and convenience trade-offs for systems with different expectations of motion sickness e.g. ferry vs. train? How comfortable are passengers with self-medication in such contingencies?
Etc. And motion sickness is only one of hundreds of possible serious weaknesses in this project. But this is inherent in anything that hasn't been tried before; anyone can think of hundreds of ways in which it can go wrong. Does this mean we should never work on anything that isn't fully proven?
- Do we have studies that estimate the effect of lateral acceleration on motion sickness? What do they indicate (e.g. 0.1% of passengers get it at 4 m/s^2, 2% at 5 m/s^2 etc.)?
- To what extent is motion sickness in HSR comparable to the proposed system? Are the differences (no outside visibility, different vibrations model, possibly different seating) significant and if so how?
- To what extent do potential passengers care about motion sickness? Has anyone compared cost and convenience trade-offs for systems with different expectations of motion sickness e.g. ferry vs. train? How comfortable are passengers with self-medication in such contingencies?
Etc. And motion sickness is only one of hundreds of possible serious weaknesses in this project. But this is inherent in anything that hasn't been tried before; anyone can think of hundreds of ways in which it can go wrong. Does this mean we should never work on anything that isn't fully proven?
> (remarking that the proposed system may involve 12% higher lateral accelerations than HSR, and instantly dismissing it as a "barf ride")
You're comparing apples to oranges here. If I understand the OP correctly, the 4.37 m/s^2 (which is a claimed maximum, not actually in practice, but let's ignore that) is in the plane of the ground. Canting will convert that acceleration into a mixture of horizontal and vertical acceleration, as experienced by the passenger. The hyperloop track has 11.1 m/s^2 of acceleration in the plane of the ground based on their path assumptions (= (480km/h = 133 m/s)^2 / 1600 m), which the OP claims can get converted to 5 m/s^2 of vertical acceleration. This 7 times greater than "track specifications" of 0.5-0.67 m/s^2 and 5 times greater than the 0.93 m/s^2 of vertical acceleration coming from the Transrapid's 4.37 m/s^2 in the plane of the ground.
To step back for a minute, the issues with curve radius for high-speed transit have existed since the beginnings of high-speed rail 50 years ago and maybe longer. It's one of the major issues preventing Amtrak from going faster in the Northeast corridor, for example. If there was some easy way (blocking windows, lowering vibrations, changing expectations, self-medication) to deal with it, our first assumption should be that someone's already tried it. If Elon Musk had some new, breakthrough ideas in this regard, then our assumption should be that he would somehow mention it, rather than expecting the Internet to figure it out from the numbers he uses.
In the absence of evidence that any of the thousands of people who have designed high-speed transit allow for such sharp turns, or that the hyperloop designers have any way to mitigate the effects of high acceleration, I think the most likely possibility is that they (some of whom work for SpaceX, remember) used acceleration limits coming from the space program. Since they seem never bothered to compare to look at actual high-speed rail systems, they never noticed how different their assumptions where.
You're comparing apples to oranges here. If I understand the OP correctly, the 4.37 m/s^2 (which is a claimed maximum, not actually in practice, but let's ignore that) is in the plane of the ground. Canting will convert that acceleration into a mixture of horizontal and vertical acceleration, as experienced by the passenger. The hyperloop track has 11.1 m/s^2 of acceleration in the plane of the ground based on their path assumptions (= (480km/h = 133 m/s)^2 / 1600 m), which the OP claims can get converted to 5 m/s^2 of vertical acceleration. This 7 times greater than "track specifications" of 0.5-0.67 m/s^2 and 5 times greater than the 0.93 m/s^2 of vertical acceleration coming from the Transrapid's 4.37 m/s^2 in the plane of the ground.
To step back for a minute, the issues with curve radius for high-speed transit have existed since the beginnings of high-speed rail 50 years ago and maybe longer. It's one of the major issues preventing Amtrak from going faster in the Northeast corridor, for example. If there was some easy way (blocking windows, lowering vibrations, changing expectations, self-medication) to deal with it, our first assumption should be that someone's already tried it. If Elon Musk had some new, breakthrough ideas in this regard, then our assumption should be that he would somehow mention it, rather than expecting the Internet to figure it out from the numbers he uses.
In the absence of evidence that any of the thousands of people who have designed high-speed transit allow for such sharp turns, or that the hyperloop designers have any way to mitigate the effects of high acceleration, I think the most likely possibility is that they (some of whom work for SpaceX, remember) used acceleration limits coming from the space program. Since they seem never bothered to compare to look at actual high-speed rail systems, they never noticed how different their assumptions where.
The article was a fairly even mix of real issues and more hand-waving. Its going to take 2 hours to traverse the hyperloop terminals? Where did that come from?
The Hyperloop document was obviously putting a flag up a flagpole to see who salutes. It had a few man-hours of estimations put into it. It looks like that, obviously.
So the numbers need improvement, sure. Its nit-picking when you get all emotional about it and trash the author.
The Hyperloop document was obviously putting a flag up a flagpole to see who salutes. It had a few man-hours of estimations put into it. It looks like that, obviously.
So the numbers need improvement, sure. Its nit-picking when you get all emotional about it and trash the author.
I think the 2 hours is the rush-hour driving time to get from the more populous station of the proposed HSR to the less-populous station for they hyperloop.
My maths may be letting me down but 4m/s is a mere 14km/h, and many production cars will get you from 0 to 115km/h in less than 8 seconds, so the acceleration of 4m/s^2 is fairly common in consumer world, so unlikely to crush windpipes.
the criticism amounts almost entirely to basic arithmetic and comparisons to existing systems that are built on rather different principles.
But many of most important (and show-stopping) principles involved are the same, and those are what tend to cause delays and increase costs - things like running into unexpected geology, dealing with NIMBY's, the eminent domain process and so on.
He seems to think that, in between, his colleagues have been perfecting the fine forms of the art and polishing its many facets.
They (we) are. Want to see for yourself? Go to the Transportation Research Board annual meeting in Washington D.C.: http://www.trb.org/AnnualMeeting2014/AnnualMeeting2014.aspx
Except feats that were once fairly common, such as building the Hoover Dam under budget and two years ahead of schedule [1], are in the realm of the mythical these days.
You can say the same about the original elevated Boston Artery, the 19th century railroads, etc. The biggest difference between the mega-projects of old and today involve 1) the environmental process and 2) commitments to worker safety. It's fairly easy to build a project quickly when you don't care about splitting neighborhoods, killing/maiming workers and contaminating soil. The environmental process in particular has been a double-edged sword - it's done well in protecting the environment and communities, but it also provides means for anyone who doesn't like any facet of a project to significanty delay (or kill) it.
But many of most important (and show-stopping) principles involved are the same, and those are what tend to cause delays and increase costs - things like running into unexpected geology, dealing with NIMBY's, the eminent domain process and so on.
He seems to think that, in between, his colleagues have been perfecting the fine forms of the art and polishing its many facets.
They (we) are. Want to see for yourself? Go to the Transportation Research Board annual meeting in Washington D.C.: http://www.trb.org/AnnualMeeting2014/AnnualMeeting2014.aspx
Except feats that were once fairly common, such as building the Hoover Dam under budget and two years ahead of schedule [1], are in the realm of the mythical these days.
You can say the same about the original elevated Boston Artery, the 19th century railroads, etc. The biggest difference between the mega-projects of old and today involve 1) the environmental process and 2) commitments to worker safety. It's fairly easy to build a project quickly when you don't care about splitting neighborhoods, killing/maiming workers and contaminating soil. The environmental process in particular has been a double-edged sword - it's done well in protecting the environment and communities, but it also provides means for anyone who doesn't like any facet of a project to significanty delay (or kill) it.
>The biggest difference between the mega-projects of old and today involve 1) the environmental process and 2) commitments to worker safety.
I don't see why environmental and safety considerations are such big unknowns, I think we have a pretty good handle on both by now. Are they factoring to build it with pollution and no safety when they estimate the cost and schedule these days?
In fact, if you read about the history of Hoover Dam there were a number of these things that they weren't legally mandated to do back then, but did them anyway. For instance, workers were offered employer-based health insurance (an arrangement that later evolved into what we know today as Kaiser Permanente).
I don't see why environmental and safety considerations are such big unknowns, I think we have a pretty good handle on both by now. Are they factoring to build it with pollution and no safety when they estimate the cost and schedule these days?
In fact, if you read about the history of Hoover Dam there were a number of these things that they weren't legally mandated to do back then, but did them anyway. For instance, workers were offered employer-based health insurance (an arrangement that later evolved into what we know today as Kaiser Permanente).
I think we have a pretty good handle on both by now
In terms of a specific project, not really. Look at everything that goes into an environmental study: watershed/water quality, affected wildlife/endangered species, noise & vibration, soil contamination, archaeological issues, visual impacts, rodent/pests, etc, etc. On top of that, you have to consider the effects of all of those areas during construction and ongoing operations for 20+ years. And that doesn't even account for NIMBY issues.
When you're getting into the details of a specific project, it can quickly become overwhelming, especially if you have people who may be philosophically opposed to the project hammering you with those issues time and time again.
Are they factoring to build it with pollution and no safety when they estimate the cost and schedule these days?
When you look at a project at a high level, you make general assumptions, but as you get more detailed and you know specifically what kind of equipment
Take for example, tunneling: At the start of a project, your best information tells you that the sand down to 70ft below grade is clay, so you make your cost and construction estimates using this assumption. You get into detailed design and send drill crews out to collect sample borings and you find out that in much of the area where you assumed sand, you actually have bedrock coming up to 10ft below grade. Now you're plans have to change - instead of doing cut-and-cover tunneling everywhere, you have to blast in some sections, which means having to get a blasting contractor, deal with protecting nearby structures, changing traffic patterns to allow for the blasting etc. In the old days, the project would have just blasted, and if someone's foundation got cracked in the process, too bad. Today that won't fly.
edit: just saw your edit
In fact, if you read about the history of Hoover Dam there were a number of these things that they weren't legally mandated to do back then, but did them anyway.
Compare the number of people killed at the Hoover Dam project compared with the number killed during the Big Dig.
In terms of a specific project, not really. Look at everything that goes into an environmental study: watershed/water quality, affected wildlife/endangered species, noise & vibration, soil contamination, archaeological issues, visual impacts, rodent/pests, etc, etc. On top of that, you have to consider the effects of all of those areas during construction and ongoing operations for 20+ years. And that doesn't even account for NIMBY issues.
When you're getting into the details of a specific project, it can quickly become overwhelming, especially if you have people who may be philosophically opposed to the project hammering you with those issues time and time again.
Are they factoring to build it with pollution and no safety when they estimate the cost and schedule these days?
When you look at a project at a high level, you make general assumptions, but as you get more detailed and you know specifically what kind of equipment
Take for example, tunneling: At the start of a project, your best information tells you that the sand down to 70ft below grade is clay, so you make your cost and construction estimates using this assumption. You get into detailed design and send drill crews out to collect sample borings and you find out that in much of the area where you assumed sand, you actually have bedrock coming up to 10ft below grade. Now you're plans have to change - instead of doing cut-and-cover tunneling everywhere, you have to blast in some sections, which means having to get a blasting contractor, deal with protecting nearby structures, changing traffic patterns to allow for the blasting etc. In the old days, the project would have just blasted, and if someone's foundation got cracked in the process, too bad. Today that won't fly.
edit: just saw your edit
In fact, if you read about the history of Hoover Dam there were a number of these things that they weren't legally mandated to do back then, but did them anyway.
Compare the number of people killed at the Hoover Dam project compared with the number killed during the Big Dig.
I really appreciate and thank you for the perspective you bring to this discussion. Even if I turn out to be completely wrong, I'll still be glad I initiated it if only to elicit this kind of response.
That being said, I'm by no means persuaded. If the original technical estimates can't be completely precise, why do they always happen to always be inaccurate on the bad side these days? How come they rarely plan for bedrock and get a lot more clay instead?
Overall, I understand there are new challenges today that older projects didn't encounter. On the other hand, they also had serious challenges that we don't meet (very bad transportation network, frequent strikes, including the wildcat variety, a much less educated workforce etc.) Maybe it's even true that, despite all the new technologies and infrastructure to help us, the cost per unit needs to be higher these days and work needs to proceed more slowly. But that still doesn't explain why projects almost always still run over that higher cost and longer schedule.
That being said, I'm by no means persuaded. If the original technical estimates can't be completely precise, why do they always happen to always be inaccurate on the bad side these days? How come they rarely plan for bedrock and get a lot more clay instead?
Overall, I understand there are new challenges today that older projects didn't encounter. On the other hand, they also had serious challenges that we don't meet (very bad transportation network, frequent strikes, including the wildcat variety, a much less educated workforce etc.) Maybe it's even true that, despite all the new technologies and infrastructure to help us, the cost per unit needs to be higher these days and work needs to proceed more slowly. But that still doesn't explain why projects almost always still run over that higher cost and longer schedule.
why do they always happen to always be inaccurate on the bad side these days?
I don't have time to find it right now, but I remember reading a study a few years ago that showed most projects to in fact come in on time and on budget. It's the few major projects that make the headlines that have schedule & budget problems, and (to no surprise) those tend to be the projects that have to deal with the most complexities. It's not different than large software projects.
On the other hand, they also had serious challenges that we don't meet
Sure, but they could work around those problems by (literally) throwing bodies at that project and dumping crap into rivers. And some of those things you indentifiy as problems ("very bad transportation network," "less educated workforce") aren't really problems - "less educated" means "cheap": the project just needed to train you to hold a rivet in place or swing a hammer, today's workforce needs to know how to manage complex diesel equipment. "very bad transportation network" means "more room to work": building the Hoover Dam in the boonies is in many respects much less difficult than building the 2nd Avenue subway under a crowded Manhattan or building the Big Dig under a busy Boston. In fact most of the high cost of CA HSR isn't from building the sections in the boonies (which is why they're starting construction there first), it's building the connections into the heavily populated metro areas like San Francisco and LA.
If you ever have the chance (and you're an American), go to a public meeting organized by a huge capital project. Listen to all of the comments (ranging from measured to angry, reasonable to crazy) and keep in mind that the project has to address all of those concerns. That will give you a sense of scale of the problem. In fact I spend this past weekend dealing with concerns that frankly defy the laws of thermodynamics, but the project has to address, which means I spend billing hours debunking it.
edit: enko makes a good point, you could go ulta-conservative with cost estimation, but then every highway widening project becomes a $100 billion undertaking and nothing would ever get done. Projects to set aside 5-15% for continengy and most of the time that's enough. Of course there are outliers, and those are what tend to get attention. You also have times were a project may also set a relatively low budget, but they get back bids from contractors and/or engineering firms that way exceed the budget, so the budget gets increased.
I don't have time to find it right now, but I remember reading a study a few years ago that showed most projects to in fact come in on time and on budget. It's the few major projects that make the headlines that have schedule & budget problems, and (to no surprise) those tend to be the projects that have to deal with the most complexities. It's not different than large software projects.
On the other hand, they also had serious challenges that we don't meet
Sure, but they could work around those problems by (literally) throwing bodies at that project and dumping crap into rivers. And some of those things you indentifiy as problems ("very bad transportation network," "less educated workforce") aren't really problems - "less educated" means "cheap": the project just needed to train you to hold a rivet in place or swing a hammer, today's workforce needs to know how to manage complex diesel equipment. "very bad transportation network" means "more room to work": building the Hoover Dam in the boonies is in many respects much less difficult than building the 2nd Avenue subway under a crowded Manhattan or building the Big Dig under a busy Boston. In fact most of the high cost of CA HSR isn't from building the sections in the boonies (which is why they're starting construction there first), it's building the connections into the heavily populated metro areas like San Francisco and LA.
If you ever have the chance (and you're an American), go to a public meeting organized by a huge capital project. Listen to all of the comments (ranging from measured to angry, reasonable to crazy) and keep in mind that the project has to address all of those concerns. That will give you a sense of scale of the problem. In fact I spend this past weekend dealing with concerns that frankly defy the laws of thermodynamics, but the project has to address, which means I spend billing hours debunking it.
edit: enko makes a good point, you could go ulta-conservative with cost estimation, but then every highway widening project becomes a $100 billion undertaking and nothing would ever get done. Projects to set aside 5-15% for continengy and most of the time that's enough. Of course there are outliers, and those are what tend to get attention. You also have times were a project may also set a relatively low budget, but they get back bids from contractors and/or engineering firms that way exceed the budget, so the budget gets increased.
I would like to see that study saying most projects come in under budget. I'm guessing it doesn't apply to the large and complex projects we're talking about here, which are probably harder to estimate. And, the fact that it's in California may matter, too. According to Musk yesterday, without a citation:
And, according to this:
http://californiawatch.org/dailyreport/bullet-train-bidder-h...
...the lowest (and winning) bidder for early work on the California HSR has a history of cost overruns, so things aren't starting out so hot.
Your last paragraph seems to say that we don't want accurate estimates because then we might not do the projects. That's the point of knowing the costs. We don't want to do projects that are too expensive.
Large projects, like Hyperloop or HSR, are probably the ones particularly likely to be "outliers" (if indeed projects with overruns are outliers) and big projects are the ones where that damage costs the most, so it's a double whammy.
Meanwhile, if we're now accepting that lowballing is a good idea, as your last paragraph says, then I don't understand why you seem to be defending the original article as Musk must just be lowballing and he expects overruns. It will take a lot of overruns to catch up with the ostensible California HSR budget.
I will say that, with SpaceX, Musk and the government have fixed-price contracts, so SpaceX eats cost overruns. They also have the lowest space cargo delivery cost for their class. This gives me some evidence that Musk could deliver more cheaply and on budget than the linked industry observer expects.
I don’t think we should do the high-speed
rail thing because it’s currently slated
to be roughly $70 billion but if one ratio
is the cost at approval time versus the
cost at completion time of most large
projects I think it’s probably going to be
close to $100 billion.
And, according to this:
http://californiawatch.org/dailyreport/bullet-train-bidder-h...
...the lowest (and winning) bidder for early work on the California HSR has a history of cost overruns, so things aren't starting out so hot.
Your last paragraph seems to say that we don't want accurate estimates because then we might not do the projects. That's the point of knowing the costs. We don't want to do projects that are too expensive.
Large projects, like Hyperloop or HSR, are probably the ones particularly likely to be "outliers" (if indeed projects with overruns are outliers) and big projects are the ones where that damage costs the most, so it's a double whammy.
Meanwhile, if we're now accepting that lowballing is a good idea, as your last paragraph says, then I don't understand why you seem to be defending the original article as Musk must just be lowballing and he expects overruns. It will take a lot of overruns to catch up with the ostensible California HSR budget.
I will say that, with SpaceX, Musk and the government have fixed-price contracts, so SpaceX eats cost overruns. They also have the lowest space cargo delivery cost for their class. This gives me some evidence that Musk could deliver more cheaply and on budget than the linked industry observer expects.
Your last paragraph seems to say that we don't want accurate estimates because then we might not do the projects.
No, my last paragraph says we don't want ultra-conservative estimates because we would definitely not do the projects.
Meanwhile, if we're now accepting that lowballing is a good idea, as your last paragraph says
My last paragraph doesn't say that.
This gives me some evidence that Musk could deliver more cheaply and on budget than the linked industry observer expects.
Perhaps. But if I were a betting man, I think Must will be in for a rude awakening upon discovering the mess that is the public environmental process, as have many other entrepreneurs before him.
No, my last paragraph says we don't want ultra-conservative estimates because we would definitely not do the projects.
Meanwhile, if we're now accepting that lowballing is a good idea, as your last paragraph says
My last paragraph doesn't say that.
This gives me some evidence that Musk could deliver more cheaply and on budget than the linked industry observer expects.
Perhaps. But if I were a betting man, I think Must will be in for a rude awakening upon discovering the mess that is the public environmental process, as have many other entrepreneurs before him.
> why do they always happen to always be inaccurate on the bad side these days?
Well, an obvious factor is that there is a huge incentive to under-estimate for anyone with an interest in the project's green light. The cheaper a project looks on that initial paper, the more likely it will be approved, and if/when it goes over budget, what are they going to do? Cancel it with the tunnel half dug?
It's a political/societal problem of poor economic ideologies, lowest-bidder pricing and misaligned incentives, coupled with a low aversion to - or even understanding of - economic crime.
And it's by no means limited to these mega-projects. I know a certain software company who specialises in winning contracts by low-balling the price, expecting to argue it up later when all sorts of "unexpected" issues arise - those same issues the losing bids allowed for. Pretty much the same game.
Well, an obvious factor is that there is a huge incentive to under-estimate for anyone with an interest in the project's green light. The cheaper a project looks on that initial paper, the more likely it will be approved, and if/when it goes over budget, what are they going to do? Cancel it with the tunnel half dug?
It's a political/societal problem of poor economic ideologies, lowest-bidder pricing and misaligned incentives, coupled with a low aversion to - or even understanding of - economic crime.
And it's by no means limited to these mega-projects. I know a certain software company who specialises in winning contracts by low-balling the price, expecting to argue it up later when all sorts of "unexpected" issues arise - those same issues the losing bids allowed for. Pretty much the same game.
Re: EPA regulations. I think Elon's familiar with the curveballs of meeting regulations :)
https://twitter.com/TalulahRiley/status/320421724644573184 https://twitter.com/TalulahRiley/status/320422298618302464
Just to toss in an entertaining data point.
https://twitter.com/TalulahRiley/status/320421724644573184 https://twitter.com/TalulahRiley/status/320422298618302464
Just to toss in an entertaining data point.
He definitely seemed to have a chip on his shoulder with a lot of unnecessary backhanded comments, and many engineers do suffer from saying "no" too often, but I do think he raised several points that are applicable to the Hyperloop. Until someone invents anti-gravity, g-forces and other traditional physics problems are going to be a factor. I've been in a sustained half g turn. It's not uncomfortable, but it's not exactly old person friendly, either (in simplistic terms, take half your body weight and imagine that much force pushing you laterally). You'll want bucket seats.
And I did not know the Hyperloop would not actually go into LA proper. That's a significant difference to me. That last leg into LA is where a lot of the traffic trauma happens, the part I would most want to avoid.
Ultimately both "sides" need to work with each other. The entrepreneur pushing the envelope, and the engineer making sure things are feasible.
And I did not know the Hyperloop would not actually go into LA proper. That's a significant difference to me. That last leg into LA is where a lot of the traffic trauma happens, the part I would most want to avoid.
Ultimately both "sides" need to work with each other. The entrepreneur pushing the envelope, and the engineer making sure things are feasible.
I would add he completely ignores the fact he runs a SpaceX which has significantly under cut a long established industry. If you look at his numbers there Basicly estimates for actual costs before padding where large contractors pad construction costs as much as possible because that's how they maximize proffits.
SpaceX is based on a fairly different principle, of taking proven designs from the past, updating them, and building them for less. For example SpaceX's Grasshopper VTVL is following in the footsteps of the 1990s McDonnell Douglas DC-X, not some kind of completely untested idea. He isn't taking a previously speculative technology idea, like a space elevator or something, and trying to build it.
An analog here would be if Musk had a proposal to take an existing, working mode of transit (at least working in prototype) and build it for less. But the current proposal is more like hard sci-fi: goes into enough depth to be back-of-the-envelope plausible, but no detailed engineering or working demonstration, and very hand-wavy cost estimates.
An analog here would be if Musk had a proposal to take an existing, working mode of transit (at least working in prototype) and build it for less. But the current proposal is more like hard sci-fi: goes into enough depth to be back-of-the-envelope plausible, but no detailed engineering or working demonstration, and very hand-wavy cost estimates.
[deleted]
Currently SpaceX doesn't offer significantly lower LEO delivery costs -- they are on par with Ukrainian/Russian space programs [1].
[1] http://en.wikipedia.org/wiki/Comparison_of_orbital_launch_sy...
[1] http://en.wikipedia.org/wiki/Comparison_of_orbital_launch_sy...
The Falcon 9 is the cheapest Medium sized launch vehicle it's more expencive to LEO per LB than a heavy launch system or retrofitting old ICBM's. However, we are considering US construction costs and SpaceX spent far less on R&D and spends less on construction than any US equivalents.
> Except feats that were once fairly common, such as building the Hoover Dam under budget and two years ahead of schedule
Buildng projects on the scale of the Hoover Dam (whether under budget and ahead of schedule or not) were never "fairly common".
Buildng projects on the scale of the Hoover Dam (whether under budget and ahead of schedule or not) were never "fairly common".
Okay, so this is over the top and not very constructive.
However, there is an underlying pattern that annoys me too. There are literally thousands of people working in innovative transportation ideas, why is the barely researched idea of a relative amateur like Musk receiving so much attention?
The same applies to the Soylent story: people who have been working on the problem for decades are being ignored in favor of self-promoting entrepreneurs who's ideas lack depth.
The great irony is that the cheerleaders for these entrepreneurs are the same people that bitch about the lack of scientific knowledge in politicians and the lack of attention for science in general.
I can perfectly understand that this pisses people of who have been diligently working on these problems for decades.
However, there is an underlying pattern that annoys me too. There are literally thousands of people working in innovative transportation ideas, why is the barely researched idea of a relative amateur like Musk receiving so much attention?
The same applies to the Soylent story: people who have been working on the problem for decades are being ignored in favor of self-promoting entrepreneurs who's ideas lack depth.
The great irony is that the cheerleaders for these entrepreneurs are the same people that bitch about the lack of scientific knowledge in politicians and the lack of attention for science in general.
I can perfectly understand that this pisses people of who have been diligently working on these problems for decades.
It sounds to me that you have discovered an important and often underestimated property of disruptive ideas. How did an 18 year old change the way we communicate online forever? How could a clerk at the patent office usher in the era of 20th century physics?
It's possible and maybe even easier to have truly breakthrough ideas if you're coming from a different field. You can always catch up on all the knowledge required to execute your idea later.
And yes, often you'll find out that your idea wasn't so great. But at least you didn't dismiss it as out of hand because you didn't come across it in your years of experience in the field.
It's possible and maybe even easier to have truly breakthrough ideas if you're coming from a different field. You can always catch up on all the knowledge required to execute your idea later.
And yes, often you'll find out that your idea wasn't so great. But at least you didn't dismiss it as out of hand because you didn't come across it in your years of experience in the field.
It's wrong to think that Einstein was "coming from a different field". He had a PhD in physics from a good school. In his day, physics jobs were much scarcer, so perfectly ordinary physicists tended to need to get non-physics jobs for parts of their careers.
Perhaps a better example is how an aspiring poet came to invent the most effective infantry weapon of the last century: http://en.wikipedia.org/wiki/Mikhail_Kalashnikov
An aspiring poet who had also been a tank mechanic/weapons designer for 9~ years prior to inventing the most effective infantry weapon of the last century
Yes, but he was conscripted in his teens and had begun innovating at that young age.
Not sure it is a good analogy. From the article you are referencing he wanted to be an engineer, just an agricultural one. WW2 changed that.
Also, he seems to acknowledge the fact that he was standing on the shoulders of giants:
But one thing is clear: before attempting to create something new, it is vital to have a good appreciation of everything that already exists in this field. I myself have had many experiences confirming this to be so.
Also, he seems to acknowledge the fact that he was standing on the shoulders of giants:
But one thing is clear: before attempting to create something new, it is vital to have a good appreciation of everything that already exists in this field. I myself have had many experiences confirming this to be so.
No, a better example is Elon Musk himself. Paypal, SpaceX, Tesla. That's a pretty good run and I don't think anybody will claim he was an insider to all three industries before he made a significant dent in them.
It is extremely rare for someone with little to no knowledge or training in a field to step in and change everything. Anyone claiming to do so should is making extraordinary claims and needs to provide extraordinary evidence.
[deleted]
True, but disruption is extremely rare in mechanical and civil engineering. It's more common in SW and theoretical fields.
Sounds like a marketing problem for these diligent hard workers? But would more attention aid them in their decade long hikes or hinder them by opening them up to more public scrutiny and the possible need to appease that can follow? Certainly don't know myself.
it's not a marketing problem. people outside a given field will, by virtue of their inexperience, be prone to more hubristic ideas they don't understand the impossibility of. combined w/ the tech scene's natural credulity - as demonstrated by the Soylent debacle - & there you go.
the problem w/ casually describing it as a "marketing problem" is it completely excuses both entrepreneurial excess & the whole Valley hype thing. sure, there should be an onus on people to present/market their ideas well, but also on the public to be a little more skeptical of wild & unfounded claims.
the problem w/ casually describing it as a "marketing problem" is it completely excuses both entrepreneurial excess & the whole Valley hype thing. sure, there should be an onus on people to present/market their ideas well, but also on the public to be a little more skeptical of wild & unfounded claims.
I missed the soylent 'debacle', what went wrong?
I think the parent is talking about the massive hype[1] generated around Soylent, which is i) weird ii) not in any way original and iii) sub-optimally marketed with some probably illegal claims.
[1] It's really impressive how they managed to create such interest around a product idea, with people describing it as innovative and disruptive, when you've been able to walk into any drugstore and buy identical (but better researched and quality assured) products off the shelf.
[1] It's really impressive how they managed to create such interest around a product idea, with people describing it as innovative and disruptive, when you've been able to walk into any drugstore and buy identical (but better researched and quality assured) products off the shelf.
the part where a guy who has no idea what he's doing got an absurdly positive response for a product that's nothing new at best & dangerous at worst
Well, think about how little spotlight Thorium have when it comes down to it. Only recently have there started to be momentum to get this field to a point where we can say whether it possible or not.
I would assume there are thousands of other areas like this where some "better" version never sees the light of day.
I would assume there are thousands of other areas like this where some "better" version never sees the light of day.
While the author is annoyingly dismissive of Musk, the tribal responses here are unusually defensive and uninformative. It seems like our identities have expanded to encompass Elon Musk as well as Bitcoin (pro and con) and the NSA.
http://www.paulgraham.com/identity.html
http://www.paulgraham.com/identity.html
An interesting article, and seems to be nicely referenced. Most of the detraction of the article seems to be attacking his dismissal of Musk; that shouldn't matter, given it seems to actually quote sources for details. I found especially interesting this quote:
> If a famous question could be solved in ten pages, it probably wouldn’t still be open.
Which of course isn't saying that it's impossible, but that claiming it to be so requires overwhelming proof.
Hyperloop seems like an interesting idea, and certainly worth some investigation and research (as is, any proposal and idea). But large scale hand waving and dismissals of the problems as ad hominem attacks don't help lend an air of legitimacy.
My personal view? I find it interesting that he proposed this, but initially didn't want to do any of the development or payment himself. That doesn't sound like someone who truly believes in their "vision".
> If a famous question could be solved in ten pages, it probably wouldn’t still be open.
Which of course isn't saying that it's impossible, but that claiming it to be so requires overwhelming proof.
Hyperloop seems like an interesting idea, and certainly worth some investigation and research (as is, any proposal and idea). But large scale hand waving and dismissals of the problems as ad hominem attacks don't help lend an air of legitimacy.
My personal view? I find it interesting that he proposed this, but initially didn't want to do any of the development or payment himself. That doesn't sound like someone who truly believes in their "vision".
Musk has pretty regularly stressed that this is an alpha design, and that he welcomes feedback and improvements. It may be true that he trashes HSR and that it competes with Tesla. HSR is also stupidly expensive and arguably too slow. Regardless of your feelings on HSR, it's also impossible to argue that the CA government is likely not to screw it up somehow. It's possible that he could both benefit from HSR failing and also be benevolently proposing that we actually try something new. Don't forget, he's pledged his own money to this, and now seems to be leaning towards developing a prototype. I wonder if putting up the cash for a prototype will quiet the critics down. I, for one, am a big fan of rich people spending their money on cool things that they like, from Mark Cuban pushing the limits of analytics in basketball to Musk with Tesla/SpaceX/Hyperloop to Bill Gates' humanitarian efforts.
This guy's main real criticism is "train viaducts cost X and Musk's proposal is 0.1X therefore it must be wrong" is total bullshit. It MIGHT be valid under the following assumptions:
1. The weight of the train and the hyperloop capsules are the same
2. The construction methods employed are identical.
But they're not! Average train car weight (if they have to comply with FRA regulations) should be in the 60 ton range. https://www.ebbc.org/rail/fra.html and http://uk.answers.yahoo.com/question/index?qid=2006082807531... Average train car length is betwen 60 and 80 feet so we'll go with 80.
60 tons / 80 feet = 1500lbs/foot. In the case that a non-FRA compliant car can be used, that number SHOULD drop to about 750lbs/foot.
The hyperloop cars are speculated to be 16.5 tons and 28.5 tons each. No hard numbers on length but if you assume 3ft per passenger and 28 total (14 per side) and add a bit of room for the other stuff, you can come up with 14 * 3+15=57 feet or for three cars, 3 * 20+15=75 feet.
33,000lbs / 57 feet = 578lbs/ft. 57,000lbs / 75 feet = 760lbs/ft
So it looks like the big-case hyperloop will weigh about the same as the best-case high speed rail.
Now let's analyze the support mechanism. Trains run on rails (two of them) and they weigh ~100 lbs per foot and are around 3" wide and 6" tall. These rails need to be very precisely supported both side-to-side and up-and-down especially if the trains are going to run at 200+ MPH. For viaduct you've got to build the bridge, then put down the ties, then put rail on top of those, fasten it down, etc. Ties are in the range of 6-8" thick and then there's the ballast (rocks) which aren't light either and which are generally required to keep the ties from moving. On bridges (viaduct) you might do something newer and fancier but I wouldn't count on it here in the US. Overall you've got at least 200lbs/foot for the rails and I might guess another 500-1500lbs/foot for the ties and ballast and such. Rock weighs ~150lbs/cuft and so does concrete so if your ties + ballast are a foot thick and 8 feet wide (rails are 4'8" plus 20" extra on the sides) that's 1200lbs/foot.
Hyperloop runs in a 7.5 foot diameter tube with a 0.8in thick wall. 7.5 * 12 * pi * 0.8=226 square inches cross section. Or a foot of it has 2712 cubic inches of steel. At 0.283lbs/cu-in that comes out to be 767lbs/foot. Because it's pipe (which has excellent structural geometry) it is self-supporting and thus all you really have to do is get the pipe properly supported on top of the pylons, weld two sections together and you're done.
Here's the last part. Hyperloop cars will be at least a mile apart. That means the system can be designed to support just one of them per pylon. Train cars will be 3 feet apart, and thus the viaducts have to support 1500lbs/foot * 80 feet per car * 10 cars = 600 tons. Versus the hyperloop car weights of 16.5 tons or 28.5 tons.
So these two systems are mildly different in terms of their car weights but dramatically different in terms of the overall structural requirements and design to meet those structural requirements. Train track is heavy and train cars are heavy and trains are fairly dense (due to their length). Hyperloop cars are about half as heavy and hyperloop track is half as heavy and hyperloop support densities are only about half versus rail. 0.5 * 0.5 * 0.5 = 0.125 or 12.5% which isn't terribly far off from the 10% number that the Hyperloop is quoted to cost versus the high speed rail system.
TL;DR: Cut track weight by half, car weight by half, and total support weight by half and you get 0.125 which is suspiciously close to 0.10, the number that the article author had such a problem with.
EDIT1: formatting
EDIT2: tl;dr
1. The weight of the train and the hyperloop capsules are the same
2. The construction methods employed are identical.
But they're not! Average train car weight (if they have to comply with FRA regulations) should be in the 60 ton range. https://www.ebbc.org/rail/fra.html and http://uk.answers.yahoo.com/question/index?qid=2006082807531... Average train car length is betwen 60 and 80 feet so we'll go with 80.
60 tons / 80 feet = 1500lbs/foot. In the case that a non-FRA compliant car can be used, that number SHOULD drop to about 750lbs/foot.
The hyperloop cars are speculated to be 16.5 tons and 28.5 tons each. No hard numbers on length but if you assume 3ft per passenger and 28 total (14 per side) and add a bit of room for the other stuff, you can come up with 14 * 3+15=57 feet or for three cars, 3 * 20+15=75 feet.
33,000lbs / 57 feet = 578lbs/ft. 57,000lbs / 75 feet = 760lbs/ft
So it looks like the big-case hyperloop will weigh about the same as the best-case high speed rail.
Now let's analyze the support mechanism. Trains run on rails (two of them) and they weigh ~100 lbs per foot and are around 3" wide and 6" tall. These rails need to be very precisely supported both side-to-side and up-and-down especially if the trains are going to run at 200+ MPH. For viaduct you've got to build the bridge, then put down the ties, then put rail on top of those, fasten it down, etc. Ties are in the range of 6-8" thick and then there's the ballast (rocks) which aren't light either and which are generally required to keep the ties from moving. On bridges (viaduct) you might do something newer and fancier but I wouldn't count on it here in the US. Overall you've got at least 200lbs/foot for the rails and I might guess another 500-1500lbs/foot for the ties and ballast and such. Rock weighs ~150lbs/cuft and so does concrete so if your ties + ballast are a foot thick and 8 feet wide (rails are 4'8" plus 20" extra on the sides) that's 1200lbs/foot.
Hyperloop runs in a 7.5 foot diameter tube with a 0.8in thick wall. 7.5 * 12 * pi * 0.8=226 square inches cross section. Or a foot of it has 2712 cubic inches of steel. At 0.283lbs/cu-in that comes out to be 767lbs/foot. Because it's pipe (which has excellent structural geometry) it is self-supporting and thus all you really have to do is get the pipe properly supported on top of the pylons, weld two sections together and you're done.
Here's the last part. Hyperloop cars will be at least a mile apart. That means the system can be designed to support just one of them per pylon. Train cars will be 3 feet apart, and thus the viaducts have to support 1500lbs/foot * 80 feet per car * 10 cars = 600 tons. Versus the hyperloop car weights of 16.5 tons or 28.5 tons.
So these two systems are mildly different in terms of their car weights but dramatically different in terms of the overall structural requirements and design to meet those structural requirements. Train track is heavy and train cars are heavy and trains are fairly dense (due to their length). Hyperloop cars are about half as heavy and hyperloop track is half as heavy and hyperloop support densities are only about half versus rail. 0.5 * 0.5 * 0.5 = 0.125 or 12.5% which isn't terribly far off from the 10% number that the Hyperloop is quoted to cost versus the high speed rail system.
TL;DR: Cut track weight by half, car weight by half, and total support weight by half and you get 0.125 which is suspiciously close to 0.10, the number that the article author had such a problem with.
EDIT1: formatting
EDIT2: tl;dr
That means the system can be designed to support just one of them per pylon.
The capacity of the structure is not just limited to the weight of the revenue vehicles, the structure needs to handle other loads it may encounter over the its useful life, such as snow (probably not much of an issue in central/southern CA), water (if the tunnel leaks) and maintenance vehicles (which will likely be significantly heavier than the passenger cars since they will have to be self-propelled).
then put down the ties, then put rail on top of those, fasten it down, etc. Ties are in the range of 6-8" thick and then there's the ballast (rocks) which aren't light either and which are generally required to keep the ties from moving.
You don't need ballast & tie track on structures.
In any event, cutting the material weights in half (even if you can, which is doubtful) does not automatically cut your costs by 90 percent. You still have the environmental process, you still have NIMBYs, you still have construction mobilization costs, etc.
The capacity of the structure is not just limited to the weight of the revenue vehicles, the structure needs to handle other loads it may encounter over the its useful life, such as snow (probably not much of an issue in central/southern CA), water (if the tunnel leaks) and maintenance vehicles (which will likely be significantly heavier than the passenger cars since they will have to be self-propelled).
then put down the ties, then put rail on top of those, fasten it down, etc. Ties are in the range of 6-8" thick and then there's the ballast (rocks) which aren't light either and which are generally required to keep the ties from moving.
You don't need ballast & tie track on structures.
In any event, cutting the material weights in half (even if you can, which is doubtful) does not automatically cut your costs by 90 percent. You still have the environmental process, you still have NIMBYs, you still have construction mobilization costs, etc.
That's a good point; something I neglected in my analysis.
I would argue that since the tube sections would all be pre-fab that means that the installation cost of the tube would be really small. Rail installation costs are no joke due to the need to precisely align horizontally and vertically the two rails.
You can make tube in 50ft sections and ship them via truck without needing any special permitting and given that the highway runs right next to the planned route, the pre-fab notion is quite a good one.
I would argue that since the tube sections would all be pre-fab that means that the installation cost of the tube would be really small. Rail installation costs are no joke due to the need to precisely align horizontally and vertically the two rails.
You can make tube in 50ft sections and ship them via truck without needing any special permitting and given that the highway runs right next to the planned route, the pre-fab notion is quite a good one.
Rail installation costs are no joke due to the need to precisely align horizontally and vertically the two rails.
The hyperloop sections would also need to be precisely aligned.
You can make tube in 50ft sections and ship them via truck without needing any special permitting
But you may need special routing for those trucks to allow overhead clearance and turn radii, and you may need to build temporary roads for access to the installation site. There are lots of little things that tend to add up that are ignored in the whitepaper. You may be able to reduce costs by a few percent, but 90% is not a figure that I can take all that seriously.
The hyperloop sections would also need to be precisely aligned.
You can make tube in 50ft sections and ship them via truck without needing any special permitting
But you may need special routing for those trucks to allow overhead clearance and turn radii, and you may need to build temporary roads for access to the installation site. There are lots of little things that tend to add up that are ignored in the whitepaper. You may be able to reduce costs by a few percent, but 90% is not a figure that I can take all that seriously.
A standard semi-trailer is 53ft long and an internal cargo area that's 8ft wide and 8ft tall. I think you can fit a 7.5ft diameter tube inside an 8ft square box.
If you wanted to do the 11ft you would need a low-boy trailer to avoid height permitting and you would need "wide load" signs for the trucks individually but no lead/chase vehicles.
The tube joining/welding/grinding jig could be 40ft (or 200 ft or more) long and fit inside the already assembled tube AND the to-be-welded tube. Precision alignment could be done via movable clamps. Once the tube is held in place via the jig it can be welded via a number of methods (friction stir, friction, MIG, TIG or SMAW) inside, outside or both.
If you wanted to do the 11ft you would need a low-boy trailer to avoid height permitting and you would need "wide load" signs for the trucks individually but no lead/chase vehicles.
The tube joining/welding/grinding jig could be 40ft (or 200 ft or more) long and fit inside the already assembled tube AND the to-be-welded tube. Precision alignment could be done via movable clamps. Once the tube is held in place via the jig it can be welded via a number of methods (friction stir, friction, MIG, TIG or SMAW) inside, outside or both.
I think you can fit a 7.5ft diameter tube inside an 8ft square box.
You are not going to give yourself 6-inches of clearance for a component that weighs (using your numbers) 19.2 tons, that pipe is going on a flatbed. You also have to allow room for tie-downs, flanges, support blocks, etc. You also have to account for bridge weight limits.
I'm not saying this isn't doable (the Big Dig was able to truck in 100 ft soldier piles, although they had to do it at night), it's just that it often takes extra planning and work which increases costs.
The tube joining/welding/grinding jig could be 40ft (or 200 ft or more) long and fit inside the already assembled tube AND the to-be-welded tube.
Are you basing this on something that already exists, or is this something you are proposing?
You are not going to give yourself 6-inches of clearance for a component that weighs (using your numbers) 19.2 tons, that pipe is going on a flatbed. You also have to allow room for tie-downs, flanges, support blocks, etc. You also have to account for bridge weight limits.
I'm not saying this isn't doable (the Big Dig was able to truck in 100 ft soldier piles, although they had to do it at night), it's just that it often takes extra planning and work which increases costs.
The tube joining/welding/grinding jig could be 40ft (or 200 ft or more) long and fit inside the already assembled tube AND the to-be-welded tube.
Are you basing this on something that already exists, or is this something you are proposing?
Yes I'm quite aware. You'd actually build a number of semi-trailers that had the proper rigging on them, welded down. My point was to say that it's entirely possible to fit that size of a tube onto a semi trailer with no hardship at all. No wide corners, no permits, no height restrictions, none of that.
If it's possible to make two tunnel boring machines meet at the middle of the English channel with the starting points separated by some 20 miles, then it's entirely possible to build a pipe-section-holding jig which can ensure precise alignment. I probably can't write a check for one and have it in a year (partly because I don't have $5mm, also because the plans don't exist yet) but to suggest that it would take more than three years to design, build and verify such a machine is a bit extreme. You could probably do it in a year or less provided that you're willing to pay more.
The machine as a whole doesn't exist yet but all the various component pieces of it do and they're all COTS parts. It's part tunnel boring machine (http://en.wikipedia.org/wiki/Tunnel_boring_machine) part orbital welder (http://www.mecomachineandfab.com/public/images/photos/orbita...) and the rest is "glue."
Make it 300 feet long so that it's always resting on pipe that's already affixed at two separate pylons and so that it doesn't deflect the pipe on either side of the joint it's about to make. An external crane (or if you get clever, one built onto the TBM/welder rig) lifts the pipe up, the jig grabs hold of it, positions it, and then makes the weld. Let the machine advance slightly and x-ray the entire weld for QA/QC and provided it passes, advance the machine to do the next section.
If you wanted me to make one of these for you I'd probably quote $500k-$1mm for the initial research including a small prototype (10-20" diameter) and I would guess (+- 50%) $10mm for the big one.
If it's possible to make two tunnel boring machines meet at the middle of the English channel with the starting points separated by some 20 miles, then it's entirely possible to build a pipe-section-holding jig which can ensure precise alignment. I probably can't write a check for one and have it in a year (partly because I don't have $5mm, also because the plans don't exist yet) but to suggest that it would take more than three years to design, build and verify such a machine is a bit extreme. You could probably do it in a year or less provided that you're willing to pay more.
The machine as a whole doesn't exist yet but all the various component pieces of it do and they're all COTS parts. It's part tunnel boring machine (http://en.wikipedia.org/wiki/Tunnel_boring_machine) part orbital welder (http://www.mecomachineandfab.com/public/images/photos/orbita...) and the rest is "glue."
Make it 300 feet long so that it's always resting on pipe that's already affixed at two separate pylons and so that it doesn't deflect the pipe on either side of the joint it's about to make. An external crane (or if you get clever, one built onto the TBM/welder rig) lifts the pipe up, the jig grabs hold of it, positions it, and then makes the weld. Let the machine advance slightly and x-ray the entire weld for QA/QC and provided it passes, advance the machine to do the next section.
If you wanted me to make one of these for you I'd probably quote $500k-$1mm for the initial research including a small prototype (10-20" diameter) and I would guess (+- 50%) $10mm for the big one.
What is your experience with large capital projects?
Very little. I've made a pretty decent career of doing things that are hard or expensive or both, generally for cheap.
I built an semi-automated package dimensioner and barcode reader for about $5k in parts plus my time The NRE was probably around $40k. A fully automated one (including transport) starts at something like $80k. The company I worked for then might have lost money on the first one (only if you look at opportunity cost) but by the time they build three, they've saved at least $150k. Three of them plus the employees to operate them would have a similar throughput, higher dimensional capacity and better exception handling (what do you do with a damaged package? Or one that's leaking?) than the one fully automated system. An $80k system that can do 10x what your needs are is definitely more expensive even if the per-unit costs are the same because you're paying for idle time.
Elon Musk isn't going to call me up and ask me to build that system for him. But if he did I wouldn't have too many problems making it happen. The difficulty isn't making the machine, it's finding someone with the constitution to ride out the periods of uncertainty and doubt while all the bugs are being ironed out.
EDIT: When I've suggested that I could do the research and build a 10-20" prototype I'm referring just to the pipe positioning jig + orbital welding system. Not a small-scale hyperloop. That would be quite insane. Just a precision alignment jig and associated welding equipment to do the final fit and assembly of the pre-fabricated pieces.
I built an semi-automated package dimensioner and barcode reader for about $5k in parts plus my time The NRE was probably around $40k. A fully automated one (including transport) starts at something like $80k. The company I worked for then might have lost money on the first one (only if you look at opportunity cost) but by the time they build three, they've saved at least $150k. Three of them plus the employees to operate them would have a similar throughput, higher dimensional capacity and better exception handling (what do you do with a damaged package? Or one that's leaking?) than the one fully automated system. An $80k system that can do 10x what your needs are is definitely more expensive even if the per-unit costs are the same because you're paying for idle time.
Elon Musk isn't going to call me up and ask me to build that system for him. But if he did I wouldn't have too many problems making it happen. The difficulty isn't making the machine, it's finding someone with the constitution to ride out the periods of uncertainty and doubt while all the bugs are being ironed out.
EDIT: When I've suggested that I could do the research and build a 10-20" prototype I'm referring just to the pipe positioning jig + orbital welding system. Not a small-scale hyperloop. That would be quite insane. Just a precision alignment jig and associated welding equipment to do the final fit and assembly of the pre-fabricated pieces.
I ask because my perception in reading your comments is that theory translates nicely to real-world practice (which is also what I get from reading the Hyperloop white paper), when the reality IME is that it almost never does.
For example:
If it's possible to make two tunnel boring machines meet at the middle of the English channel with the starting points separated by some 20 miles, then it's entirely possible to build a pipe-section-holding jig which can ensure precise alignment.
Of course it's possible, I've never claimed that it wasn't. The issue isn't "is it possible" it's "can it be done at less cost than current proposals." History shows numerous examples of new construction techniques that worked great on paper, but had significant implementation flaws - for example soil freezing was supposed to be a panecea on the Central Artery/Tunnel project, but there were a ton of problems in the implementation and unexpected results that needed to be dealth with. Even your Channel Tunnel example proves this point - it used a lot of innovative technology and it came in late and over 80% over budget.
You talk about a welding rig that doesn't exist as a fait accompli. You wrote "My point was to say that it's entirely possible to fit that size of a tube onto a semi trailer with no hardship at all.' - that's bull, I've seen crews have a difficult time moving smaller and lighter pieces off and on semis. "No wide corners, no permits, no height restrictions, none of that" - really? You're familiar with every possible street route along the proposed Hyperlink corridor? Because if a truck gets stuck someplace (it happens: http://www.wwlp.com/dpp/news/local/hampden/truck-stuck-at-ho... ) the project is in for a bad time. And again, we haven't even begun to address NIMBY issues.
That said (and I'm being serious here) if you have the chops to make solutions like this work, you need to be working (or consulting) for the big engineering firms like AECOM, PB, CH2M Hill, Jacobs, etc. Your ideas could revolutionize the industry.
The difficulty isn't making the machine, it's finding someone with the constitution to ride out the periods of uncertainty and doubt while all the bugs are being ironed out.
Exactly. That period is called "final design and construction." It's been the death of many construction and A&E firms.
For example:
If it's possible to make two tunnel boring machines meet at the middle of the English channel with the starting points separated by some 20 miles, then it's entirely possible to build a pipe-section-holding jig which can ensure precise alignment.
Of course it's possible, I've never claimed that it wasn't. The issue isn't "is it possible" it's "can it be done at less cost than current proposals." History shows numerous examples of new construction techniques that worked great on paper, but had significant implementation flaws - for example soil freezing was supposed to be a panecea on the Central Artery/Tunnel project, but there were a ton of problems in the implementation and unexpected results that needed to be dealth with. Even your Channel Tunnel example proves this point - it used a lot of innovative technology and it came in late and over 80% over budget.
You talk about a welding rig that doesn't exist as a fait accompli. You wrote "My point was to say that it's entirely possible to fit that size of a tube onto a semi trailer with no hardship at all.' - that's bull, I've seen crews have a difficult time moving smaller and lighter pieces off and on semis. "No wide corners, no permits, no height restrictions, none of that" - really? You're familiar with every possible street route along the proposed Hyperlink corridor? Because if a truck gets stuck someplace (it happens: http://www.wwlp.com/dpp/news/local/hampden/truck-stuck-at-ho... ) the project is in for a bad time. And again, we haven't even begun to address NIMBY issues.
That said (and I'm being serious here) if you have the chops to make solutions like this work, you need to be working (or consulting) for the big engineering firms like AECOM, PB, CH2M Hill, Jacobs, etc. Your ideas could revolutionize the industry.
The difficulty isn't making the machine, it's finding someone with the constitution to ride out the periods of uncertainty and doubt while all the bugs are being ironed out.
Exactly. That period is called "final design and construction." It's been the death of many construction and A&E firms.
Again, I'm referring just to the pipe alignment and orbital welding rig. The orbital welding part is a well understood problem and solution. I could call up half a dozen companies today and for $20k buy an orbital welder in the 10-20" range. That's off the shelf. If I wanted to scale that up they might have to custom fabricate the tracks to guide the welding portion, but that's trivial. It might cost another $20k if the size is really big, and make another $40k if I want to buy a REALLY big power supply so that it can weld faster but as a class of problems orbital welding is a solved one.
As far as loading tubes go, you're likely going to build a tube rolling facility. These kinds of places tend to have overhead cranes. Big ones. Cranes that can grab the tube on both ends and thus have precise control over it. Most likely the loading would be done "indoors" so weather is mostly factored out. Building semi-circular restraints that grab the tube in 3-5 places along the 50ft length is done easily enough with a water-jet or you could roll a pipe into a semi-circle and weld supports to it. Once you have the custom trailer done it's relatively straightforward. You'd build the infrastructure to handle this in a highly automated fashion, similar to how container ships get loaded and unloaded. ~350 miles is 36,960 50ft sections of tube, double it since we're doing double-wide. If you know you need that much at the beginning there's a lot of work that can be done to make the whole thing reasonably efficient and cost effective.
I don't understand why you're expanding the scope to NIMBY or access roads or stuck trucks (locate the plant near the freeway) or any of this. I was talking specifically about the loading and unloading of pipe and making a jig to hold said pipe for precise welding.
Again, when I said "The difficulty isn't making the machine, it's finding someone with the constitution to ride out the periods of uncertainty and doubt while all the bugs are being ironed out." I'm referring only to building the alignment/welding machine, not the entire Hyperloop system. I realize that building the whole thing is immensely more difficult than building the alignment/welding jig. But we're inventing very little new stuff here, mostly repurposing things or making incremental changes.
All the "final design and construction" that you're talking about has the same risks and problems for the HSR as for the Hyperloop. If I have to be exposed to an 80% cost overrun I'd rather it was on a $5bn or $7.5bn project rather than an $80bn one. Maybe Hyperloop even has a 300% cost overrun and somehow the HSR project could come in 25% under budget. Hyperloop would then be (assuming the bigger version) $22.5bn versus the rail at $60bn.
The reason I don't work at a big engineering firm is that I couldn't get hired in at a senior enough level to actually get anything done. So I work for small companies. Thus far my track record is excellent but it would probably take me another 10-15 years for me to have enough successes at difficult projects for people to stop assuming it's a fluke. And by then I might not be too interested in risking my career on every project I work on.
This is why startups are even possible. The risk aversion of senior management makes it possible for people who are too young and too dumb to know that something's "impossible" to make it happen. If you've got any ideas how I could get hired at a big construction firm at a senior level I'm all ears.
There is all kinds of crazy stuff out there: https://www.youtube.com/watch?v=E0O78AyDixY
They're using a $45mm, 45 foot diameter TBM in Miami right now that's 450 feet long, has the ability to erect concrete rings inside of the machine, and can exert crazy pressure on the rock face. http://www.portofmiamitunnel.com/faqs/tunnel-boring-machine/
I'm suggesting something with less challenging specs and suggesting it could be built for less money. I don't think it's unreasonable.
As far as loading tubes go, you're likely going to build a tube rolling facility. These kinds of places tend to have overhead cranes. Big ones. Cranes that can grab the tube on both ends and thus have precise control over it. Most likely the loading would be done "indoors" so weather is mostly factored out. Building semi-circular restraints that grab the tube in 3-5 places along the 50ft length is done easily enough with a water-jet or you could roll a pipe into a semi-circle and weld supports to it. Once you have the custom trailer done it's relatively straightforward. You'd build the infrastructure to handle this in a highly automated fashion, similar to how container ships get loaded and unloaded. ~350 miles is 36,960 50ft sections of tube, double it since we're doing double-wide. If you know you need that much at the beginning there's a lot of work that can be done to make the whole thing reasonably efficient and cost effective.
I don't understand why you're expanding the scope to NIMBY or access roads or stuck trucks (locate the plant near the freeway) or any of this. I was talking specifically about the loading and unloading of pipe and making a jig to hold said pipe for precise welding.
Again, when I said "The difficulty isn't making the machine, it's finding someone with the constitution to ride out the periods of uncertainty and doubt while all the bugs are being ironed out." I'm referring only to building the alignment/welding machine, not the entire Hyperloop system. I realize that building the whole thing is immensely more difficult than building the alignment/welding jig. But we're inventing very little new stuff here, mostly repurposing things or making incremental changes.
All the "final design and construction" that you're talking about has the same risks and problems for the HSR as for the Hyperloop. If I have to be exposed to an 80% cost overrun I'd rather it was on a $5bn or $7.5bn project rather than an $80bn one. Maybe Hyperloop even has a 300% cost overrun and somehow the HSR project could come in 25% under budget. Hyperloop would then be (assuming the bigger version) $22.5bn versus the rail at $60bn.
The reason I don't work at a big engineering firm is that I couldn't get hired in at a senior enough level to actually get anything done. So I work for small companies. Thus far my track record is excellent but it would probably take me another 10-15 years for me to have enough successes at difficult projects for people to stop assuming it's a fluke. And by then I might not be too interested in risking my career on every project I work on.
This is why startups are even possible. The risk aversion of senior management makes it possible for people who are too young and too dumb to know that something's "impossible" to make it happen. If you've got any ideas how I could get hired at a big construction firm at a senior level I'm all ears.
There is all kinds of crazy stuff out there: https://www.youtube.com/watch?v=E0O78AyDixY
They're using a $45mm, 45 foot diameter TBM in Miami right now that's 450 feet long, has the ability to erect concrete rings inside of the machine, and can exert crazy pressure on the rock face. http://www.portofmiamitunnel.com/faqs/tunnel-boring-machine/
I'm suggesting something with less challenging specs and suggesting it could be built for less money. I don't think it's unreasonable.
> TL;DR: Cut track weight by half, car weight by half, and total support weight by half and you get 0.125 which is suspiciously close to 0.10, the number that the article author had such a problem with.
In the comments to his blog post, the OP disputes that lighter weight is going to lead to significantly lower pylon cost. I didn't look through his references, but he also has an update showing how assuming that pylon costs are going to be linear in the weight is not consistent with the hyperloop document itself.
I had to reread the update a few times, but the argument is: the proposal contains two versions, for passengers and for cars. The car version will weigh more and cost more, but the cost increase is much less percentage-wise than the weight increase, so the hyperloop designers themselves don't believe that pylon will be linear in the weight.
As I said elsewhere, this is why references are not just a formality. If the designers had explained where they got their cost estimates from, we could still argue about their accuracy, but we wouldn't have to speculate where they came from.
In the comments to his blog post, the OP disputes that lighter weight is going to lead to significantly lower pylon cost. I didn't look through his references, but he also has an update showing how assuming that pylon costs are going to be linear in the weight is not consistent with the hyperloop document itself.
I had to reread the update a few times, but the argument is: the proposal contains two versions, for passengers and for cars. The car version will weigh more and cost more, but the cost increase is much less percentage-wise than the weight increase, so the hyperloop designers themselves don't believe that pylon will be linear in the weight.
As I said elsewhere, this is why references are not just a formality. If the designers had explained where they got their cost estimates from, we could still argue about their accuracy, but we wouldn't have to speculate where they came from.
There's a table in the PDF on pages 55-56 that shows the tube & pylon cost breakdown. In the small version the tube costs $650mm to make. In the large version, which has 60% more material, it's quoted to cost $1200mm to make. That's an 84% increase in cost for a 60% increase in materials. The other costs in the system such as the cost of pylons, installation, etc are individual line items on the overall budget of $5bn or $7.5bn
The problem seems to be: if you could build a partially evacuated tunnel on top of pylons, you could build a light rail system on top of the same pylons with the same sized cars and it would weight less since the track weighs less than the tube and you could replace the car's 1500kg batters with drive motors and power them off a third rail/over head wire.
Of course, this would have rather poor capacity, but that's a problem with the hyperloop as well. It would also be slower at maybe 200 - 250 MPH, lowering capacity further.
But if someone claimed they could simply do a 250mph light rail at drastically lower cost, people would necessarily be skeptical. Adding a bunch of really interesting high speed tech on top, shouldn't change that claim much. About the one way I can see it should change the skepticism is if the increased speed increases capacity sufficiently. Which seems not to be the case.
Of course, this would have rather poor capacity, but that's a problem with the hyperloop as well. It would also be slower at maybe 200 - 250 MPH, lowering capacity further.
But if someone claimed they could simply do a 250mph light rail at drastically lower cost, people would necessarily be skeptical. Adding a bunch of really interesting high speed tech on top, shouldn't change that claim much. About the one way I can see it should change the skepticism is if the increased speed increases capacity sufficiently. Which seems not to be the case.
1) I doubt construction cost is a linear function of weight, as costs of material often are only a fraction of them. For example, one will need access ways for repairs, regardless of the weight of the structure.
2) I would expect that wind pressure on a tube is higher than on a rail with an occasional train on it. If so, the supports need to be designed to handle that higher load.
3) I think higher speed trains going through a bend in the track exert higher forces per kg of train than slower speed trains. Again, if so, the design will have to accommodate for that.
4) I don't see how that 0.5^3 makes sense. If both track and train are half the weight, my conclusion would be "total structure to lift is half the weight", not "total structure to lift is a quarter the weight".
I am not an engineer, so corrections welcome.
2) I would expect that wind pressure on a tube is higher than on a rail with an occasional train on it. If so, the supports need to be designed to handle that higher load.
3) I think higher speed trains going through a bend in the track exert higher forces per kg of train than slower speed trains. Again, if so, the design will have to accommodate for that.
4) I don't see how that 0.5^3 makes sense. If both track and train are half the weight, my conclusion would be "total structure to lift is half the weight", not "total structure to lift is a quarter the weight".
I am not an engineer, so corrections welcome.
I'll just add one thing. It's reasonable to criticize musk for 'not knowing things outside of his domain'. But claiming that musk knows nothing about the cost of building metal tubes, is really stupid. It's certainly possible musk is fudging the numerical values.
Building metal tubes is one thing. Actually getting permission from abutters to install those metal tubes on/near their property and then dealing with the varying field conditions is a whole 'nother problem.
in the original musk writeup, those two costs are separated, which is why the OP does the cost comparison like it's done (on a material basis)
I'm really unsure about the author's assertions regarding the maximum accelerations that people can take. Those might be the normal regulatory limits for passenger rail, but I'm pretty sure that the accelerations I've experienced on planes have also gone up into territories the author would consider utterly unacceptable.
On the other hand, I think he has some good points regarding the cost numbers. If pylons have all the advantages that Musk claims then why aren't we all getting around city on monorails?
On the other hand, I think he has some good points regarding the cost numbers. If pylons have all the advantages that Musk claims then why aren't we all getting around city on monorails?
If there's enough public will to make something great happen, and that something-great is within the realm of engineering feasibility, then it will happen.
I love HSR. But I also think we as a species are capable of much, much, much more than we're currently accomplishing. And much of the reason we're stuck using slow, uninspiring, and polluting technology from yester-year is a lack of public will.
So to the naysayers: if you want to harp on some bold proposal to do something great, pretend it's 1961 and someone told you about sending men to the moon and back. Pretend it was 1948 and someone proposed making trains that went 90 mph. Pretend it was 1850 and someone proposed linking Paddington and Farringdon using a massive tunnel buried deep underground. Real things change all the time. Technology can make problems go away. Bold proposals such as Musk's -- proposals that are the good-faith effort of someone who is ultra-competent and with a lot of social and financial capital -- are proposals that need to be celebrated and encouraged.
Doing new things well is orders of magnitude more difficult than doing that which has been done before. If you've never followed-through on a crazy and bold idea, please temper your critique of those who have.
I love HSR. But I also think we as a species are capable of much, much, much more than we're currently accomplishing. And much of the reason we're stuck using slow, uninspiring, and polluting technology from yester-year is a lack of public will.
So to the naysayers: if you want to harp on some bold proposal to do something great, pretend it's 1961 and someone told you about sending men to the moon and back. Pretend it was 1948 and someone proposed making trains that went 90 mph. Pretend it was 1850 and someone proposed linking Paddington and Farringdon using a massive tunnel buried deep underground. Real things change all the time. Technology can make problems go away. Bold proposals such as Musk's -- proposals that are the good-faith effort of someone who is ultra-competent and with a lot of social and financial capital -- are proposals that need to be celebrated and encouraged.
Doing new things well is orders of magnitude more difficult than doing that which has been done before. If you've never followed-through on a crazy and bold idea, please temper your critique of those who have.
Is it possible to build viaducts for $5mil/km?
Yes, however the cost of a viaduct is largely dependent on the height required. The Alasca pipeline came in around 1.2 million per mile dispite vary harsh conditions but it was also rather low to the ground.
Maybe I'm confused about the meaning of the word "viaduct", does a pipeline count as one?
A pipeline doesn't need viaducts because it doesn't have severe restrictions on curves. It can follow terrain:
https://en.wikipedia.org/wiki/File:Trans-Alaska_Pipeline_Sys...
A high-speed railway needs to be flat, so it needs tall pylons to support it above uneven terrain:
https://en.wikipedia.org/wiki/File:SNCF_TGV_Duplex_Viaduc_de...
https://en.wikipedia.org/wiki/File:Millau_Viaduct_constructi...
https://en.wikipedia.org/wiki/File:Trans-Alaska_Pipeline_Sys...
A high-speed railway needs to be flat, so it needs tall pylons to support it above uneven terrain:
https://en.wikipedia.org/wiki/File:SNCF_TGV_Duplex_Viaduc_de...
https://en.wikipedia.org/wiki/File:Millau_Viaduct_constructi...
Trains often need viaducts due to those restrictions but a multi span footbridge over a swamp is a viaduct as is the Disney monorail. My point is simply elevating a span is not that expencive. However, as you say high speed rail needs a vary flat track so cost estimates need to look at the actual path vs just saying 5m/km is rediculus without any justification.
The LA end is really Sylmar, at the edge of the LA Basin; with additional access time and security checks, this is no faster than conventional HSR doing the trip in 2:40.
"Security checks"? Why would Hyperloop require any more security checks than the HSR? If anything, you'd expect security to be faster for a constant stream of departures, vs 1000+ passengers bunched together for a train.
(Or you could be sensible like the French, Japanese, Germans and Chinese and dispense with any train-related security theatre entirely, but that would probably be too much to ask in the land of the free and the home of the scared.)
"Security checks"? Why would Hyperloop require any more security checks than the HSR? If anything, you'd expect security to be faster for a constant stream of departures, vs 1000+ passengers bunched together for a train.
(Or you could be sensible like the French, Japanese, Germans and Chinese and dispense with any train-related security theatre entirely, but that would probably be too much to ask in the land of the free and the home of the scared.)
Security checks is not the main cost of time there. The hyperloop is suggested to end up in Sylmar, which according to google, is about a 30 minute drive from Union Station in the center of Los Angeles, where the HSR will stop at. I don't live in LA so I'm not sure whether that 30 minutes is optimistic or pessimistic.
'skeptical' doesn't seem like the right word. I think 'loathsome' would be more fitting. While the author makes some good points, it was hard to consider them legitimate given that he sandwiched the article with opinionated rants that seemed to abhor the idea of successful people having good ideas.
Frankly, I'm sickened at the hubris involved in this kind of analysis.
Musk owns a space exploration company that is flying regular commercial missions, yet OP thinks that Musk has made elementary mistakes in his physics calculations. SpaceX are currently building a passenger spacecraft, but OP thinks that nobody has factored the effect of G forces on passengers into the design. They have reduced the cost of putting mass into orbit by an order of magnitude, but OP deigns to assess the validity of Musk's cost estimates.
Frankly, who the fuck is he to tell Elon Musk what is possible? Musk has degrees in both economics and applied physics. He has done the "impossible" in three industries and is an epoch-defining figure in electronic payments, space exploration and the motor industry. Musk isn't some crackpot with a big bank balance, he's a genius with an astonishing track record of revolutionising established industries from the outside, by ignoring old assumptions about what is possible.
Hyperloop might succeed or fail, but I genuinely can't think of a single person who has ever lived who might be better qualified to make that judgement than Elon Musk.
Musk owns a space exploration company that is flying regular commercial missions, yet OP thinks that Musk has made elementary mistakes in his physics calculations. SpaceX are currently building a passenger spacecraft, but OP thinks that nobody has factored the effect of G forces on passengers into the design. They have reduced the cost of putting mass into orbit by an order of magnitude, but OP deigns to assess the validity of Musk's cost estimates.
Frankly, who the fuck is he to tell Elon Musk what is possible? Musk has degrees in both economics and applied physics. He has done the "impossible" in three industries and is an epoch-defining figure in electronic payments, space exploration and the motor industry. Musk isn't some crackpot with a big bank balance, he's a genius with an astonishing track record of revolutionising established industries from the outside, by ignoring old assumptions about what is possible.
Hyperloop might succeed or fail, but I genuinely can't think of a single person who has ever lived who might be better qualified to make that judgement than Elon Musk.
> Elon Musk, an entrepreneur who hopes to make a living some day building cars.
Didn't he already make all the living he needs and now just does whatever he likes?
Didn't he already make all the living he needs and now just does whatever he likes?
Well technically he is worth something like 6-7 billion dollars right now but I believe almost all of that is made up of stock in the companies he owns so if the companies were to end up failing then he would lose most of it and I don't think he plans on selling any of his stock any time soon.
You can almost completely write the article off considering he's characterizing Musk's achievements with such dismissive condescension.
What I got from article:
Author is:
- unfriendly towards Elon Musk
- unfriendly towards people who voice ideas of what the author thinks is not their area of expertise in general.
- fond of high speed trains.
- thinking that Elon Musk wants to kill trains to sell more cars.
... oh yeah, and he has some concerns about Hyperloop estimates. Mainly that cost and disadvantages are underestimated.
Also somehow author managed to overlooked the fact that Elon Musk delivered some stuff to International Space Station, most likely at fraction of NASA cost which consist of very experienced people.
If experienced specialist tells that something in his area of expertise can be done. He's most likely right. If he says something can't be done, there's a fair chance he's wrong.
Author is:
- unfriendly towards Elon Musk
- unfriendly towards people who voice ideas of what the author thinks is not their area of expertise in general.
- fond of high speed trains.
- thinking that Elon Musk wants to kill trains to sell more cars.
... oh yeah, and he has some concerns about Hyperloop estimates. Mainly that cost and disadvantages are underestimated.
Also somehow author managed to overlooked the fact that Elon Musk delivered some stuff to International Space Station, most likely at fraction of NASA cost which consist of very experienced people.
If experienced specialist tells that something in his area of expertise can be done. He's most likely right. If he says something can't be done, there's a fair chance he's wrong.
No, you really can't. How he characterizes Musk is irrelevant to whether his criticisms of the proposal are valid or not. Just because he deploys dismissive condescension is no excuse for also resorting to it. This is Hacker News, not Slashdot.
In an ideal world where we have infinite time to consider all comments, you are right.
However if one has to choose what to spend time on, it is prudent to filter, and for blatant subjectivity to be used as one such filter, as it is reasonable to consider it likely that arguments made by someone who is so obviously biased against someone in the first place is more likely to be careless about the arguments he makes against their ideas.
So a a time saving exercise, it is absolutely relevant to consider other factors than the argument itself.
And yes, it is imperfect and will result in a lot of people discounting valid concerns.
However if one has to choose what to spend time on, it is prudent to filter, and for blatant subjectivity to be used as one such filter, as it is reasonable to consider it likely that arguments made by someone who is so obviously biased against someone in the first place is more likely to be careless about the arguments he makes against their ideas.
So a a time saving exercise, it is absolutely relevant to consider other factors than the argument itself.
And yes, it is imperfect and will result in a lot of people discounting valid concerns.
We are no where near the stage where we can judge if Hyperloop is a good or a bad idea yet. At the moment, it is just that: an idea. It needs to be refined, torn apart, put back together, and examined thoroughly and I look forward to that happening. I'm glad this article exists and is asking tough and valid questions, but I feel like the article is wrong in trying to persuade people that the Hyperloop is intrinsically a bad idea when a much better response (at this stage) is to try and improve the design.
In particular, some parts of this article are just way way off base, e.g.:
> Tesla’s train energy consumption numbers do not pass a sanity check, which suggests either reckless disregard for the research or fraud. I wouldn’t put either past Musk: the lack of references is consistent with the former, and the fact that Musk’s current primary endeavor is a car company is consistent with the latter
and
> I write this to point out that, in the US, people will treat any crank seriously if he has enough money or enough prowess in another field.
The article would have been much stronger if it'd left ego and silly ad hominem out of it and reported on facts alone.
I also have concerns about the costings: the Hyperloop report didn't give sufficient justifications for any of them. Yet I assume they didn't just pluck them out of thin air either. We really need to know how they were calculated before we can do a more critical analysis of them or someone should try and come up with their own rigorous cost projections. We can go back and forth all day saying it seems too low until someone actually definitely proves it.
In particular, comparing Musk's projected costs for, e.g., viaducts to how much the government says they cost is almost definitely a poor metric since, after all, exactly the same could have been said for Musk's cost projections for rocket-powered spaceflight.
In particular, some parts of this article are just way way off base, e.g.:
> Tesla’s train energy consumption numbers do not pass a sanity check, which suggests either reckless disregard for the research or fraud. I wouldn’t put either past Musk: the lack of references is consistent with the former, and the fact that Musk’s current primary endeavor is a car company is consistent with the latter
and
> I write this to point out that, in the US, people will treat any crank seriously if he has enough money or enough prowess in another field.
The article would have been much stronger if it'd left ego and silly ad hominem out of it and reported on facts alone.
I also have concerns about the costings: the Hyperloop report didn't give sufficient justifications for any of them. Yet I assume they didn't just pluck them out of thin air either. We really need to know how they were calculated before we can do a more critical analysis of them or someone should try and come up with their own rigorous cost projections. We can go back and forth all day saying it seems too low until someone actually definitely proves it.
In particular, comparing Musk's projected costs for, e.g., viaducts to how much the government says they cost is almost definitely a poor metric since, after all, exactly the same could have been said for Musk's cost projections for rocket-powered spaceflight.
What's wrong with this part?
> Tesla’s train energy consumption numbers do not pass a sanity check, which suggests either reckless disregard for the research or fraud. I wouldn’t put either past Musk: the lack of references is consistent with the former, and the fact that Musk’s current primary endeavor is a car company is consistent with the latter
If the blog post's claims are correct - and the numbers in it seem to have a much more solid basis in fact than anything Elon Musk's come up with - then even a simple back-of-the-envelope calculation should've been enough to show his power consumption figures for high-speed rail are impossibly high. The trains are simply incapable of using that much power.
> Tesla’s train energy consumption numbers do not pass a sanity check, which suggests either reckless disregard for the research or fraud. I wouldn’t put either past Musk: the lack of references is consistent with the former, and the fact that Musk’s current primary endeavor is a car company is consistent with the latter
If the blog post's claims are correct - and the numbers in it seem to have a much more solid basis in fact than anything Elon Musk's come up with - then even a simple back-of-the-envelope calculation should've been enough to show his power consumption figures for high-speed rail are impossibly high. The trains are simply incapable of using that much power.
Exactly. I enjoyed the fairly well supported counter-arguments to the ideas. Inevitably it isn't going to be quite as good as it appears initially, and open debate is how consensus is reached, but he devalues the whole argument by laying into the person who brought it all up.
Whether or not the idea is valid is irrelevant - the fact that Elon Musk is proposing it does lend it some additional weight - with Space X and to a lesser extent Tesla, he has gone into an existing market, taken a step back, rethought things from the ground up, and re-written the book on how much it costs to do things.
I don't know if Hyperloop is as technically feasible and cost effective as it looks, I don't know if any government would have the courage to go in that direction, but I do know that it isn't going to get anywhere with good balanced debate on the technical merits of the proposed solution and ad hominem rubbish just gets in the way of that.
Whether or not the idea is valid is irrelevant - the fact that Elon Musk is proposing it does lend it some additional weight - with Space X and to a lesser extent Tesla, he has gone into an existing market, taken a step back, rethought things from the ground up, and re-written the book on how much it costs to do things.
I don't know if Hyperloop is as technically feasible and cost effective as it looks, I don't know if any government would have the courage to go in that direction, but I do know that it isn't going to get anywhere with good balanced debate on the technical merits of the proposed solution and ad hominem rubbish just gets in the way of that.
It's almost like it's easier to criticize new ideas than come up with them or implement them. Oh, wait...
It's not hard at all to come up with speculative transit ideas with some high-level engineering guesstimates. It's sort of a hobby of a lot of people. People have even sketched out plans for this particular idea (partially evacuated tube transport).
Implementing them: yes, that's harder, and most transit ideas fall down at that stage. Implementing them in a way that comes anywhere near the original optimistic projections is even harder (see: maglev).
Implementing them: yes, that's harder, and most transit ideas fall down at that stage. Implementing them in a way that comes anywhere near the original optimistic projections is even harder (see: maglev).
'What is love? What is creation? What is longing? What is a star?' thus asks the last man, and blinks.
The earth has become small, and on it hops the last man, who makes everything small. His race is as ineradicable as the flea; the last man lives longest.
'We have invented happiness,'say the last men, and they blink. They have left the regions where it was hard to live, for one needs warmth. One still loves one's neighbor and rubs against him, for one needs warmth...
I see Musk as something akin to Nietzsche's superman - and this chap, the detractor, the denigrator, the naysayer, is his last man.
The earth has become small, and on it hops the last man, who makes everything small. His race is as ineradicable as the flea; the last man lives longest.
'We have invented happiness,'say the last men, and they blink. They have left the regions where it was hard to live, for one needs warmth. One still loves one's neighbor and rubs against him, for one needs warmth...
I see Musk as something akin to Nietzsche's superman - and this chap, the detractor, the denigrator, the naysayer, is his last man.
I can't believe you got downvoted. You've made explicit the sycophantic, uncritical Elon Musk worship that permeates this thread.
I for one can't get the mono rail song from the Simpsons out of my head.
But people have already pointed out that this is merely an idea and should be treated as such. Though a town with money is sort of like a mule with a spinning wheel...
But people have already pointed out that this is merely an idea and should be treated as such. Though a town with money is sort of like a mule with a spinning wheel...
Geez the author of this article is a dick. It makes it very hard to read, it looks as though he makes some valid points, but it's interspersed with so much personal pettyness that it's hard to take him seriously.
Why does this guy hate Elon so much?
Why does this guy hate Elon so much?
Whether or not he's a dick does not matter. Personal antipathy or sympathy should not matter that much. That's exactly what he says btw: most people haven't even read the Hyperloop PDF but they're already fans - just because it's Musk, and he seems to be a nice guy.
Jobs-effect again and again.
Jobs-effect again and again.
I just explained why it does matter. His dickishness made his otherwise interesting article agonizing to read. I did not think the author was a dick _before_ I read the article.
Anyway, I have read the Hyperloop pdf end to end and I think it's great. I don't agree with this author at all that Elon Musk's endeavours distract from improving existing technology. Nor do I think that improving existing technology is as important as inventing new potentially disruptive technology in general.
People are fans of Musk because he succeeds and delivers in the face of spineless critics like this one. Just as people were fans of Jobs as he reintroduced quality into consumer electronics succesfully.
Anyway, I have read the Hyperloop pdf end to end and I think it's great. I don't agree with this author at all that Elon Musk's endeavours distract from improving existing technology. Nor do I think that improving existing technology is as important as inventing new potentially disruptive technology in general.
People are fans of Musk because he succeeds and delivers in the face of spineless critics like this one. Just as people were fans of Jobs as he reintroduced quality into consumer electronics succesfully.
"I don't agree with this author at all that Elon Musk's endeavours distract from improving existing technology."
Did we read the same article? I read a rant, sprinkled with lots of verifiable facts that gave strong arguments why this Hyperloop idea won't fly.
For a rebuttal, I would expect claims that his sources are incorrect, that his calculations are incorrect, or that the conclusions he draws from those calculations are incorrect. Arguing that the author ranted too much is not sufficient for me.
For example, what's wrong with his claim that people would get seasick in this thing? If there's nothing wrong with that claim, what's wrong with his claim that that is a show stopper? Similarly, wants wrong with his arguments about the low capacity of this design?
Feel free to add some rantiness, but keep the fraction of content as least as high as this article, please.
And, by the way, I do not think this article says Elon Musk does nothing good; it just claims this idea of Elon Musk is not a good one because it is highly unlikely that it is possible to fix all of its problems. For example, one can straighten the trajectory, but then, costs would balloon to be at least on par with the existing high speed rail system.
Did we read the same article? I read a rant, sprinkled with lots of verifiable facts that gave strong arguments why this Hyperloop idea won't fly.
For a rebuttal, I would expect claims that his sources are incorrect, that his calculations are incorrect, or that the conclusions he draws from those calculations are incorrect. Arguing that the author ranted too much is not sufficient for me.
For example, what's wrong with his claim that people would get seasick in this thing? If there's nothing wrong with that claim, what's wrong with his claim that that is a show stopper? Similarly, wants wrong with his arguments about the low capacity of this design?
Feel free to add some rantiness, but keep the fraction of content as least as high as this article, please.
And, by the way, I do not think this article says Elon Musk does nothing good; it just claims this idea of Elon Musk is not a good one because it is highly unlikely that it is possible to fix all of its problems. For example, one can straighten the trajectory, but then, costs would balloon to be at least on par with the existing high speed rail system.
but energy consumption for HSR in Spain is on average 73 Watt-hour (263 kJ) per passenger-km (see PDF-page 17 on a UIC paper on the subject of HSR carbon emissions), one fifth as much as Tesla claims. Tesla either engages in fraud or is channeling dodgy research about the electricity consumption of high-speed trains.
Unless the proposed HSR involves moving everyone in California to Spain and using theirs he is the one who is "engaged in fraud or just being dodgy" as he likes to put it according to actual studies of the proposed system energy consumption go as high as 6.5 MJ per passenger KM. As Musk leads with in his document the proposed system is one of the worst HSRs energy and performance wise, quoting the best numbers in existence do not make a compelling counter argument.
http://www.uctc.net/access/37/access37_assessing_hsr.shtml
Unless the proposed HSR involves moving everyone in California to Spain and using theirs he is the one who is "engaged in fraud or just being dodgy" as he likes to put it according to actual studies of the proposed system energy consumption go as high as 6.5 MJ per passenger KM. As Musk leads with in his document the proposed system is one of the worst HSRs energy and performance wise, quoting the best numbers in existence do not make a compelling counter argument.
http://www.uctc.net/access/37/access37_assessing_hsr.shtml
> actual studies of the proposed system energy consumption go as high as 6.5 MJ per passenger KM
Only if you assume that all the trains will be almost completely empty. I don't know about the US, but I've travelled on some odd routes at low-traffic hours in the UK and it's really fucking rare to see a train with as little as 10% occupancy because the rail companies don't run them.
Come to think of it, most of that was on relatively local lines that Hyperloop's not designed to replace anyway.
Only if you assume that all the trains will be almost completely empty. I don't know about the US, but I've travelled on some odd routes at low-traffic hours in the UK and it's really fucking rare to see a train with as little as 10% occupancy because the rail companies don't run them.
Come to think of it, most of that was on relatively local lines that Hyperloop's not designed to replace anyway.
Sure but the only way to hit Spain's numbers in California is if you have an occupancy above 90%, which seems equally unlikely.
As for sea sickness - don't people also get sea sick at sea? Or at an airplane? Does it stop them from travelling this way?
He compares hyperloop with the smoothest mode of transportation invented, and says it will fail because it doesn't meet it's standard. Why not compare it to flying planes or sailing boats? Or riding a Marshrutka in Ukraine?
As for the low capacity - the critique's author says Hyperloop can handle 3 times less passengers per hour. But forgots to mention that you could buy more than 3 HL lanes for the cost of one HSR lane (if I remember correctly).
He compares hyperloop with the smoothest mode of transportation invented, and says it will fail because it doesn't meet it's standard. Why not compare it to flying planes or sailing boats? Or riding a Marshrutka in Ukraine?
As for the low capacity - the critique's author says Hyperloop can handle 3 times less passengers per hour. But forgots to mention that you could buy more than 3 HL lanes for the cost of one HSR lane (if I remember correctly).
I don't think many people do get motion sickness on airplanes these days actually (on commercial flights I've been on, I haven't seen it at all). Most people don't travel by sailing boats. He is, quite validly, comparing it to the actual methods of travel that potential passengers will be comparing it to - smart money says people travelling between two cities in California have no knowledge of or interest in how much worse it could be if they were actually in Ukraine.
He disputes the HL cost estimate too, and judges that it's probably closer to the cost of HSR all things considered.
Getting sick at sea is OK because you have room to vomit in a sanitary way. Hyperloop gives no such concession.
Getting sick at sea is OK because you have room to vomit in a sanitary way. Hyperloop gives no such concession.
We must've read different articles. I read a rant about why people like Elon Musk should never be followed and ideas like the Hyperloop should never be pursued. So that's what I respond to.
His verifiable criticisms of the Hyperloop, they're probably true, good chance that people would get seasick in it, and that the capsules are too small and that corrections for this might make the project financially infeasible.
Not sure how that's relevant though.
His verifiable criticisms of the Hyperloop, they're probably true, good chance that people would get seasick in it, and that the capsules are too small and that corrections for this might make the project financially infeasible.
Not sure how that's relevant though.
... you're not sure how his 'verifiable criticisms of the Hyperloop [being] probably true' is relevant? To taking his criticisms seriously?
I am not sure how valid criticisms on technicalities are relevant to the argument of whether we should pay attention when people like Elon Musk pitch us new and exciting ideas.
Even if this project instead of 10 billion is more like the high speed train and would cost more like 100 billion, even if it was more expensive. Even if people could get sick in it.
Wouldn't it still be an interesting idea worth investigating? Wouldn't it be possible these are hurdles we could overcome? Elon Musk seems to think they are, and Elon Musk has a PhD in overcoming hurdles..
Even if this project instead of 10 billion is more like the high speed train and would cost more like 100 billion, even if it was more expensive. Even if people could get sick in it.
Wouldn't it still be an interesting idea worth investigating? Wouldn't it be possible these are hurdles we could overcome? Elon Musk seems to think they are, and Elon Musk has a PhD in overcoming hurdles..
It looks like there are two entirely different sets of concerns here. One concern is the technical feasibility of Hyperloop; your concern is to justify your hero-worship of Elon Musk.
Personally, I find it questionable that an automobile entrepreneur is choosing to publicize this concept but invest nothing into building it himself, as if to spread FUD about high speed rail. Calling Musk out for that and for not showing his work when it comes to costs and numbers is appropriate whether or not it offends your hero worship.
Personally, I find it questionable that an automobile entrepreneur is choosing to publicize this concept but invest nothing into building it himself, as if to spread FUD about high speed rail. Calling Musk out for that and for not showing his work when it comes to costs and numbers is appropriate whether or not it offends your hero worship.
It's natural to think people are dicks when they attack your personal heroes, but that doesn't make it their problem, just yours.
It's natural to think someone is a dick when they attack a person over a technical proposal. Their inability to separate personal and technical concerns alienating people from what they are saying is their problem, not mine.
There was lots of valuable discussion about requirements the Hyperloop white paper didn't discuss or questions about why some of the numbers deviate from accepted figures used in transport design, and if you're intellectually honest you will have to respond to those, not just say "he's being mean to Elon Musk!" and ignore his substantial concerns.
Though, there are also important questions he raises about Elon Musk: whether he has a conflict of interest as an automobile executive and why he is releasing white papers spreading FUD about rail projects without investing in the hyperloop project himself. The thought that Musk is a disinterested genius who does everything out of the goodness of his heart is a little naive, and the way people overreact when that's called into question says a lot.
Though, there are also important questions he raises about Elon Musk: whether he has a conflict of interest as an automobile executive and why he is releasing white papers spreading FUD about rail projects without investing in the hyperloop project himself. The thought that Musk is a disinterested genius who does everything out of the goodness of his heart is a little naive, and the way people overreact when that's called into question says a lot.
I think it requires just as much intellectual honesty to admit that people will make decisions about what they are reading and whether to continue, and some people may include in that criteria whether the person is making ad hominem attacks. The argument here isn't that he doesn't have any useful information, just that the many people are being put off by his presentation of that information.
As for Musk's character and intentions, I think he's been forthcoming in enough interviews[1] as to his reasons for starting his multiple current ventures (Tesla, SpaceX, Solar City). I don't believe his actions have contradicted his words in this respect, so for someone to attribute intentions to him that go against those statements and be believed, the burden of proof is on them.
As for Musk's character and intentions, I think he's been forthcoming in enough interviews[1] as to his reasons for starting his multiple current ventures (Tesla, SpaceX, Solar City). I don't believe his actions have contradicted his words in this respect, so for someone to attribute intentions to him that go against those statements and be believed, the burden of proof is on them.
[1]: I don't have the links on hand, but he's talked about how after Paypal he didn't *have* to do anything, being wealthy, so decided to focus on a few major areas he thought major contributions to the future of humanity could be made, to his best judgement. Those being cheap solar power, electric cars, and colonizing other planets.There are many ways to gain celebrity. Some people like Musk actually do things, create things, say clever things... others like this Levy are parasites who lack the ability to do and create but can harness enough wit and attention to criticize and attempt to destroy.
Critics will always have an audience in the envious and the shadenfreudencia.
Critics will always have an audience in the envious and the shadenfreudencia.
From the article:
I write this to point out that, in the US, people will treat any crank seriously if he has enough money or enough prowess in another field. A sufficiently rich person is surrounded by sycophants and stenographers who won’t check his numbers against anything.
I write this to point out that, in the US, people will treat any crank seriously if he has enough money or enough prowess in another field. A sufficiently rich person is surrounded by sycophants and stenographers who won’t check his numbers against anything.
Which is an entirely unsupported claim that sheds no light on whether what's in that pdf is accurate or not.
The problem is the article's criticisms aren't categorical. He doesn't apply the same standards he demands of Elon et all to his own claims.
It's sad, because clearly the guy is well informed on public transit projects, but there's no reason for him to descend into ad homs and his own pet psychoanalysis of Elon Musk.
The problem is the article's criticisms aren't categorical. He doesn't apply the same standards he demands of Elon et all to his own claims.
It's sad, because clearly the guy is well informed on public transit projects, but there's no reason for him to descend into ad homs and his own pet psychoanalysis of Elon Musk.
Alon Levy thinks that anybody that is not a 'transportation engineer' should stick to minding their own business. His agenda is shining through pretty strong here and his dislike for Elon Musk (who apparently succeeds in areas where he's not qualified to succeed in the first place) is as strong as it ever was. The more successful Elon Musk is in his endeavors the more vehement this kind of attack seems to become.
It's quite possible that there are valid criticisms embedded in between the vitriol but I wished he'd stick to the factual stuff and leave his bias out of it. Calling Elon Musk a crank is an insult given what the man has already achieved and reflects poorly on the writer.
I personally think that the best way forward with the hyperloop is to create a scale model, the tube and carriage could be (virtually?) wind tunnel tested and valuable information would be gathered that way offering a path to verify the design one step at the time starting with the hardest part, the aerodynamics.
It's quite possible that there are valid criticisms embedded in between the vitriol but I wished he'd stick to the factual stuff and leave his bias out of it. Calling Elon Musk a crank is an insult given what the man has already achieved and reflects poorly on the writer.
I personally think that the best way forward with the hyperloop is to create a scale model, the tube and carriage could be (virtually?) wind tunnel tested and valuable information would be gathered that way offering a path to verify the design one step at the time starting with the hardest part, the aerodynamics.
No, Levy just thinks that anyone who wants to make a detailed proposal for a specific line should do enough research to justify their claims, and show their evidence. He isn't a transportation engineer himself (he's a mathematician), so it's not some kind of turf defending. The fact that he as an interested amateur has this information available makes it absurd that Musk wouldn't have done at least as much research as Levy has, to back up his numbers with data.
Alternately, the proposal could have avoided making detailed claims on cost and routing, and instead focused on the high-level technology, more in the direction of validating the basic idea, and leading up to a test track. There's nothing wrong with that. But if you're going to claim you can build a line on a specific route for a specific cost, you need to do the work to justify those numbers credibly. Musk's existing document, at least, comes off as very hand-wavy and lacking in empirical grounding for any of its detailed engineering and cost estimates (that grounding could be rooted in his own data, or in existing data, but there has to be data somewhere).
Alternately, the proposal could have avoided making detailed claims on cost and routing, and instead focused on the high-level technology, more in the direction of validating the basic idea, and leading up to a test track. There's nothing wrong with that. But if you're going to claim you can build a line on a specific route for a specific cost, you need to do the work to justify those numbers credibly. Musk's existing document, at least, comes off as very hand-wavy and lacking in empirical grounding for any of its detailed engineering and cost estimates (that grounding could be rooted in his own data, or in existing data, but there has to be data somewhere).
1) Musk states specifically it is an alpha issue and welcomes constructive criticism
2) I did not claim Levy is a transportation engineer
3) Musk did this quite handy, he did not propose the hyperloop in a vacuum (pun intended) but for a specific application, this increases the chances of something being done with it
You have to start somewhere, think of this as a first proposal that can be suitably amended or scrapped in its entirety as more insight is gained.
I'm pretty skeptical about the whole thing but Musk has a history of pulling off impressive feats and I would not put it past him to come up with something that might work when tweaked. So let's hear it for constructive criticism (fix what is broken or provide actual proof why it can not work) rather than outright dismissal.
2) I did not claim Levy is a transportation engineer
3) Musk did this quite handy, he did not propose the hyperloop in a vacuum (pun intended) but for a specific application, this increases the chances of something being done with it
You have to start somewhere, think of this as a first proposal that can be suitably amended or scrapped in its entirety as more insight is gained.
I'm pretty skeptical about the whole thing but Musk has a history of pulling off impressive feats and I would not put it past him to come up with something that might work when tweaked. So let's hear it for constructive criticism (fix what is broken or provide actual proof why it can not work) rather than outright dismissal.
Alon Levy thinks that anybody that is not a 'transportation engineer' should stick to minding their own business. His agenda is shining through pretty strong here...
I did not claim Levy is a transportation engineer
You at least very strongly implied it. What did you mean his agenda was then, if he isn't a transportation engineer? If his agenda was that non transportation engineers should mind their own business, why would he be commenting on the math and engineering of it? That's not a coherent reading of what he said.
I did not claim Levy is a transportation engineer
You at least very strongly implied it. What did you mean his agenda was then, if he isn't a transportation engineer? If his agenda was that non transportation engineers should mind their own business, why would he be commenting on the math and engineering of it? That's not a coherent reading of what he said.
The main thing that's broken from the perspective of #3 is that it looks at a best-case scenario with no legal or political hurdles, and assuming the detailed construction part will not present any surprises (and surprises that massively increase costs).
But from that perspective conventional HSR is easy and cheap, too. You could sketch out a reasonable LA-SF HSR system with optimistic assumptions and put a $15 billion pricetag on it. It also has the benefit of being technically validated, and implemented in practice: Japan, France, and China have all built working systems for per-mile costs in that range or less. The California HSR issues have more to do with a mixture of politics and the U.S.'s "unique" regulatory setup, and it's not clear how hyperloop plans to sidestep those, even assuming the technology works exactly as envisioned. If Musk has some secret on how that's going to happen, I'd like to use it to just build conventional HSR!
Put differently he seems to be offering a technical solution to a problem that didn't have a technical bottleneck, and it's not even clear the technical solution works.
But from that perspective conventional HSR is easy and cheap, too. You could sketch out a reasonable LA-SF HSR system with optimistic assumptions and put a $15 billion pricetag on it. It also has the benefit of being technically validated, and implemented in practice: Japan, France, and China have all built working systems for per-mile costs in that range or less. The California HSR issues have more to do with a mixture of politics and the U.S.'s "unique" regulatory setup, and it's not clear how hyperloop plans to sidestep those, even assuming the technology works exactly as envisioned. If Musk has some secret on how that's going to happen, I'd like to use it to just build conventional HSR!
Put differently he seems to be offering a technical solution to a problem that didn't have a technical bottleneck, and it's not even clear the technical solution works.
Vitriol is right. Starting your piece with:
Thus we get Hyperloop, a loopy intercity rail transit idea proposed by Tesla Motors’ Elon Musk, an entrepreneur who hopes to make a living some day building cars.
... was just an immature and catty way to begin a (what he hoped would be) substantive attack on the Hyperloop.
The article finds some questionable issues in the initial proposal, but its unfortunate that Levy writes as though Musk is a jackass for even putting the idea out there.
Thus we get Hyperloop, a loopy intercity rail transit idea proposed by Tesla Motors’ Elon Musk, an entrepreneur who hopes to make a living some day building cars.
... was just an immature and catty way to begin a (what he hoped would be) substantive attack on the Hyperloop.
The article finds some questionable issues in the initial proposal, but its unfortunate that Levy writes as though Musk is a jackass for even putting the idea out there.
catty is a big understatement for this article - there is some pretty radical thinking in there, particularly the part about entrepreneurs not deserving the spoils of their companies, because someone else would have done it if they hadn't. (key quote: "People get extremely rich for doing something first, even if in their absence their competitors would’ve done the same six months later.")
not sure what that has to do with elon musk, other than to try and put together a "nuclear" attack on his character, going after the moral foundation of his wealth in addition to the hyperloop idea. it's like the article is a communist critique wrapped in a technical evaluation.
away from the radical and bitter aspects of this critique, i appreciate the technical comments in here. i think it is vital to have a proper, public technical evaluation of the hyperloop, and he undermines his argument with the personal and philosophical. i would love to see a response to this critique from the hyperloop side.
i would agree that musk, having lobbed this hand grenade into public discourse, should follow-through on his idea to some extent - build a test bed and prove it can be done on a small scale. in my limited experience, if something is a really good idea, you try and pursue it for yourself, rather than hoping someone else will steal it from you.
not sure what that has to do with elon musk, other than to try and put together a "nuclear" attack on his character, going after the moral foundation of his wealth in addition to the hyperloop idea. it's like the article is a communist critique wrapped in a technical evaluation.
away from the radical and bitter aspects of this critique, i appreciate the technical comments in here. i think it is vital to have a proper, public technical evaluation of the hyperloop, and he undermines his argument with the personal and philosophical. i would love to see a response to this critique from the hyperloop side.
i would agree that musk, having lobbed this hand grenade into public discourse, should follow-through on his idea to some extent - build a test bed and prove it can be done on a small scale. in my limited experience, if something is a really good idea, you try and pursue it for yourself, rather than hoping someone else will steal it from you.
[deleted]
[deleted]
In all fairness, I would give much more slack to an engineer talking about his field. But, as the author himself points out, almost all civil engineering technology is from the 19th and early 20th century. He seems to think that, in between, his colleagues have been perfecting the fine forms of the art and polishing its many facets. Except feats that were once fairly common, such as building the Hoover Dam under budget and two years ahead of schedule [1], are in the realm of the mythical these days.
[1] http://en.wikipedia.org/wiki/Hoover_dam