mdeeks

há 28 diasdiscuss

EFS is extremely slow for many workloads. We tried it for builds and various other common use cases for coding agents and the performance just isn't there. I'm guessing lots of small random reads/writes just isn't going to ever work well.

mdeeks

há 28 diasdiscuss

> MicroVMs support up to 8 hours of total runtime

Does this mean you effectively can't use them as long-lived developer environments? It sounds like even if you suspend them, this is the hard limit on the total time it can run.

mdeeks

há 2 mesesdiscuss

Two years? That exists right now. You only have to point Codex Security at an open source repo. There are a lot of tools and companies that are spinning up today that do autonomous pentesting.

I'm not even sure a specialized model is needed here. It probably just needs the right harness around existing ones.

I expect the next two years to be absolutely brutal for hacks. Attackers have supercharged tools in their hands right now. Defenders are only getting started and will have to plow through a massive backlog of newly uncovered vulns.

The major short term downside is that open source or personal projects won't be able to afford things like Codex Security.

mdeeks

há 2 mesesdiscuss

You can get a taste of this today yourself with Codex Security. I turned it on just as an experiment and in less than a week it has now become essential to all of us. I was shocked how accurate it is, how many security issues it found in existing code, how it continually finds them as we commit, and how NO ONE is immune from making these mistakes.

I'd say it is about 90% accurate for us. Often even the "Low" findings lead us to dig and realize it is actually exploitable. Everyone makes these mistakes, from the most junior to the most senior. They are just a class of bugs after all.

I expect tools like this to be a regular part of the development lifecycle from here on. We code with AI, we review with AI, we search for vulns with AI. Even if it isn't perfect, it is easily worth the cost IMHO. Highly recommend you get something enabled for your own repos ASAP

mdeeks

há 2 mesesdiscuss

What? There are three flags flying in my street alone and I'm in the middle of the liberal bay area.

mdeeks

há 5 mesesdiscuss

I'm not quite understanding your project. What is the use case? Is this so I can package up an existing terminal app as a dedicated desktop app?

If so that actually sounds really cool. I'd like a dedicated lazygit app in my tray at all times.

mdeeks

há 6 mesesdiscuss

I feel like pricing needs to be included here. I kind of don't care about 10 percentage points if the cost is dramatically higher. Cursor Bugbot is about the same cost but gives 10x the monthly quota of Qodo.

I know this is focused solely on performance, but cost is a major factor here.

mdeeks

há 9 mesesdiscuss

They aren't just building "a lot" of renewables and nuclear, they are building an absolutely mind boggling amount of it. Last year it was more than the rest of the world combined!

Who cares about mental gymnastics. It's a win for literally everyone and I hope you ca see it that way instead. Competition is good. It drives others to keep up.

Despite what the current US govt wants, the economics of solar and other renewables will drive it. Worst they can do is slow it down a bit.

mdeeks

há 9 mesesdiscuss

I didn't say China isn't doing anything. They are rolling out a mind boggling amount of clean energy right now. More than any other country by far. It's honestly incredible scale. It unfortunately isn't keeping up with their emissions though. The data is from 2023. It's very possible that in the last two years China has been able to stabilize emission growth.

I actually disagree a bit on the first part. I think developing countries have a right to have higher per capita emissions as they raise their standard of living and economy where they can get to the point of widely adopting clean energy.

mdeeks

há 9 mesesdiscuss

That’s a really great point. Maybe their emission curve is what matters. It’s the measure of if they are investing enough into reducing emissions despite their production needs.

mdeeks

há 9 mesesdiscuss

Qatar emits FAR more than the US per capita, but the total emissions are extremely small. The impact on the climate is tiny comparatively.

mdeeks

há 9 mesesdiscuss

This is one of the places where per capita doesn't matter as much as total emissions. We have one planet. The yearly total and cumulative matters the most.

China is by far the leading emitter. Over double of the US as of 2023 (latest available data I can find). China's emissions also aren't falling, they are skyrocketing. The US emissions ARE falling.

The US dominates in cumulative, which is essentially the measure of the total damage done to the planet. The US is doing something about it though. Yearly emissions have been dropping since 2007.

https://ourworldindata.org/co2-and-greenhouse-gas-emissions

mdeeks

há 9 mesesdiscuss

I signed up and tried it with Cursor. It is very close, but still has a lot of rough edges that make it hard to switch:

  * Once in Cursor I can't click on modified files or lines and have my IDE jump to it. Very hard to review changes.
  * I closed the Ona tab and couldn't figure out how to get it back so I could prompt it again.
  * I can't pin the Ona tab to the right like Cursor does
  * Is there a way to select lines and add them to context?
  * Is there a way I can pick a model?

mdeeks

há 9 mesesdiscuss

Thanks, I'll give it a shot. I wish your site would show me what it actually looks like. It's a lot of words and fancy marketing images and I have no feel for the product. It leaves me unsure if I should invest my time.

I'd love to see a short animation of what it would actually look like to do the core flow. Prompt -> environment creation -> iterating -> popping open VSCode Web -> Popping open Cursor desktop.

Also, a lot of the links on that page you linked me to are broken:

  * "manual edits and Ona Agents is very powerful." 
  * "Ona’s automations.yaml extends it with tasks and services"
  * "devcontainer.json describes the tools"

mdeeks

há 9 mesesdiscuss

PRs work well for what they are. Ship off some changes you're strongly confident about and have another human who has a lot of context read through it and double check you. It's for when you think you've finished your inner loop.

AI is more akin to pair programming with another person sitting next to you. I don't want to ship a PR or even a branch off to someone sitting next to me. I want to discuss and type together in real time.

mdeeks

há 9 mesesdiscuss

What you're describing feels like the next major evolution and is likely years away (and exciting!).

I'm mainly aiming for a good experience with what we have today. Welding an AI agent onto my IDE turned out to be great. The next incremental step feels like being able to parallelize that. I want four concurrent IDEs with AI welded onto it.

mdeeks

há 9 mesesdiscuss

This is possibly what I want? It's hard to tell from all of the marketing on the site.

I want to run a prompt that operates in an isolated environment that is open in my IDE where I can iterate with the AI. I think maybe it can do this?

mdeeks

há 9 mesesdiscuss

Yes, but my point is often times I don't want to. Sometimes there are changes I can make it seconds. I don't want to wait 15+ seconds for an AI that might do it wrong or do too much.

Also it isn't always about editing. It is about seeing the surrounding code, navigating around, and ensuring the AI did the right thing in all of the right places.

mdeeks

há 9 mesesdiscuss

I feel like these background agents still aren't doing what I want from a developer experience perspective. Running in an inaccessible environment that pushes random things to branches that I then have to checkout locally doesn't feel great.

AI coding should be tightly in the inner dev loop! PRs are a bad way to review and iterate on code. They are a last line of defense, not the primary way to develop.

Give me an isolated environment that is one click hooked up to Cursor/VSCode Remote SSH. It should be the default. I can't think of a single time that Claude or any other AI tool nailed the request on the first try (other than trivial things). I always need to touch it up or at least navigate around and validate it in my IDE.

mdeeks

ano passadodiscuss

I wasn't really referring to env. I meant change the behavior of uvx. If the first argument passed to uvx is a file path, then execute it exactly the same way as `uv --quiet run --script` does.

Or maybe create a second binary or symlink called `uvs` (short for uv script) that does the same thing.

Submissions

Instacart ChatGPT plugin: Dinner ideas to your door

comments