Be lazy, build better systems(compile.com)
compile.com
Be lazy, build better systems
https://www.compile.com/blog/product/be-lazy-build-better-systems/
5 comments
This notion gradually descended my team into hell back when I was on a project using Spring.NET, which actually does have a Turing-complete config DSL. But that wasn't the main problem, the main problem was how much configuration was needed to do absolutely anything. Mountains of it.
Create a component, then tell the framework how to instantiate it, then tell the framework to instantiate one and give it a name, then pass that name into anything that needs one.... blech.
Create a component, then tell the framework how to instantiate it, then tell the framework to instantiate one and give it a name, then pass that name into anything that needs one.... blech.
The bigger question is, what do you do with the time you save? Are you just piling on more work?
The reasons you invent things to get rid of the crap work is so that you can do the work you really want to do. In my experience, people replace one pile of work with another and call it progress.
Only the rare few will automate the things they should, and truly live the freedom they have.
The reasons you invent things to get rid of the crap work is so that you can do the work you really want to do. In my experience, people replace one pile of work with another and call it progress.
Only the rare few will automate the things they should, and truly live the freedom they have.
I think your post explains (perhaps unintentionally) why I've never really come to like working with Ruby on Rails as much as I liked working with Django. Or at least continue to feel less productive with it (despite liking Ruby).
Somehow the right amount of configuration seems to save a lot of work as compared to conventions that fall just short of actual need.
I think there's a trap, though, that leads to the 'convention over configuration' one-size-fits-all road, and it's things that require loads of annoying, hard to manage, poorly structured configuration. (Things, like, for example, Apache, IMO.)
Though perhaps I'm just not good at determining when to write my own generators and when not to, I've also had Rails applications where I wrote a generic controller that covered a dozen-plus models and wondered why there couldn't have just been a generic controller built in to begin with (it's not like it'd preclude bumping things out of generic into their own controller if necessary).
I kind of wonder, too, if the evolution towards things like Docker/CoreOS with stuff like etcd from more traditional Linux distros and virtualization might also be viewable as a trend from convention towards a 'right amount' of configuration.
Just some off the cuff thoughts.
Somehow the right amount of configuration seems to save a lot of work as compared to conventions that fall just short of actual need.
I think there's a trap, though, that leads to the 'convention over configuration' one-size-fits-all road, and it's things that require loads of annoying, hard to manage, poorly structured configuration. (Things, like, for example, Apache, IMO.)
Though perhaps I'm just not good at determining when to write my own generators and when not to, I've also had Rails applications where I wrote a generic controller that covered a dozen-plus models and wondered why there couldn't have just been a generic controller built in to begin with (it's not like it'd preclude bumping things out of generic into their own controller if necessary).
I kind of wonder, too, if the evolution towards things like Docker/CoreOS with stuff like etcd from more traditional Linux distros and virtualization might also be viewable as a trend from convention towards a 'right amount' of configuration.
Just some off the cuff thoughts.
Configuration over code is nice until there is so much configuration you need code to understand it. Also, if the configuration ever is wrong debugging is likely painful.
Every one knows the importance of DRY but only few follows it genuinely. This article is a good reminder.
The problem with DRY is that programmers learn that it's a good thing but don't learn when not to apply it. There are very good reasons to repeat yourself. The mantra I learned, which has served me quite well, is: Optimize for less state, less coupling, less complexity and less code...in that order.
I've learned to happily repeat code if it means making my programs/components more stateless, more decoupled or simpler to understand. There's nothing worse than trying to make sense of code where a programmer tried to shoehorn two similar but ultimately different concerns through the same code paths.
I'll also happily add complexity if it means reducing coupling and state and add coupling if it means being stateless. State is the ultimate enemy that makes code inflexible and buggy, especially when it's mutable state.
I've learned to happily repeat code if it means making my programs/components more stateless, more decoupled or simpler to understand. There's nothing worse than trying to make sense of code where a programmer tried to shoehorn two similar but ultimately different concerns through the same code paths.
I'll also happily add complexity if it means reducing coupling and state and add coupling if it means being stateless. State is the ultimate enemy that makes code inflexible and buggy, especially when it's mutable state.
Curious where "Optimize for less state, less coupling, less complexity and less code...in that order." came from. Would like to read more from that source.
On the other hand I learned not to be too dogmatic about DRY because it becomes costly especially in distributed systems where additional dependencies introduced for reusability sake complicate build process and deployment.
Sometimes it's better to copy&paste instead of coupling components.
The trade off is rarely "copy&paste vs coupling components". Typically, you would factor out a third component that the original 2 would use.
Two components are hardly coupled just because they happen to use the same library.
Two components are hardly coupled just because they happen to use the same library.
Separating the library does not remove dependency because library version change affects both primary components so the change requires coordination. This is really fundamental in large systems and I was hit by it many times.
Copy & paste sounds bad but what it really says is: let's make that piece an invariant and don't import the library if you only need one short function.
So I would say the trade off boils down to "simplicity vs flexibility"
Copy & paste sounds bad but what it really says is: let's make that piece an invariant and don't import the library if you only need one short function.
So I would say the trade off boils down to "simplicity vs flexibility"
> library version change affects both primary components
In my experience, it changes neither, because the interface of the library just doesn't change. Of course it depends where you make the separation. Basically, if the interface to your library is big, you either suck at API design, or you traced the wrong boundary.
Now if you happen to only need a small fraction of a sizeable library, I can only suspect the library itself fell prey to scope creep. If there's no way to import what you need, and little more, that probably indicates a problem with the library itself.
Even big libraries which by nature must make many different things can often be separated into different components. Like the SDL for instance.
---
Oh, and I was assuming we were talking about internal dependencies. Like, you write the library which will then be used in different parts of your (possibly big) project. That's very different from external dependencies, which are generally bigger, harder to freeze and harder to update.
In my experience, it changes neither, because the interface of the library just doesn't change. Of course it depends where you make the separation. Basically, if the interface to your library is big, you either suck at API design, or you traced the wrong boundary.
Now if you happen to only need a small fraction of a sizeable library, I can only suspect the library itself fell prey to scope creep. If there's no way to import what you need, and little more, that probably indicates a problem with the library itself.
Even big libraries which by nature must make many different things can often be separated into different components. Like the SDL for instance.
---
Oh, and I was assuming we were talking about internal dependencies. Like, you write the library which will then be used in different parts of your (possibly big) project. That's very different from external dependencies, which are generally bigger, harder to freeze and harder to update.
If your build process and deployment are forcing you to decomponentize something so you have to copy and paste it, I'd blame those processes instead of saying there's an inherent shortcoming in the idea of composing components.
If your "configuration" is powerful enough to do everything you need then it's Turing-complete and is just "code" by another name. If it's not powerful enough then you'll need to drop down into the code layer pretty frequently anyway.