Increasing 3d-Games-Rendering by factor 50
4 comments
I suspect latency will be a problem. As your eye scans around things will "come in to focus" and that will be noticeable.
Another issue is how wide the normal eye jitter is. There is a normal 30-100Hz jitter in eye aiming that will require your high quality area to be larger than 2°, but I don't know how much.
One last trick, the low resolution areas will need to be the correct average brightness. For many surfaces this is easy, but if you imagine a surface with a tiny, bright reflection... you could miss that until you processed it at full resolution making a bright spot that only exists if you look at it.
Another issue is how wide the normal eye jitter is. There is a normal 30-100Hz jitter in eye aiming that will require your high quality area to be larger than 2°, but I don't know how much.
One last trick, the low resolution areas will need to be the correct average brightness. For many surfaces this is easy, but if you imagine a surface with a tiny, bright reflection... you could miss that until you processed it at full resolution making a bright spot that only exists if you look at it.
Thanks for you pro feedback, sure you must be working on the cryengine2 ;)
Like all great ideas, someone has thought of this before. This idea was researched quite a bit 10 years ago -before hardware vertex transformation took off and view dependent LOD was still a hot topic. I haven't heard much about it since then. Here is the only paper I could find in a minute's googling: http://www.svi.cps.utexas.edu/EI466209.pdf
Well I really don't know why the industry doesn't start mainstreaming the eye tracking device anyway, Google would kill for knowing where people look on a page!
Thanks for the link!
Sounds Unreal?(sorry for the bad pun, am German) Well, did you know that the Human eye only percepts approx. 2° of it's total vision(110°x170°) clearly? Through multiple jumps per second of the eye(saccades) we combine the sharp spots(highest bitrate/secondmm²) in our brain to an overall sharp and steady picture.
My question is: Using a given high end 3d-Graphic-Card and an Eye-Tracker, one could concentrate half of the Render Power on this spot, which is usually displayed on a 20 to 40 ° degree screen. So take the worst case: 0.5 20°/2° * 20°/2° = 50. And there is my factor 50.
So why aren't we using this device: The Eye-Tracker cost about 15000 to 40000 $. And lots of the Render-Force is used for focus independent Rendering (reflection, etc..).
But: The price could be reduced by mass-production within a few years to 100 $, and probably 10 % of the Render-Power would last for the non clear vision degrees, so one could take 40% for independent rendering.
I came up with this idea after understanding objects and though about how the brain could save render power by only checking parts of a new object and recognizing it as real, and afterwards simulating it in its own Semantic-3d-Room Matrix-Engine.
Post me if you find the idea cool, have questions, or tell me that I am far outdated(never heard or read about such a application)!
Regards