> See the url in my comment (search for the term rfdetr-2xlarge). 2XL does indeed go up to 800x800 and has PML1.0 license instead of apache 2.0.
All of the models, including the Apache 2.0 ones, can be configured to go higher than 800x800. The difference between the ones with the PML license and the Apache 2.0 ones is the backbone, not the resolution.
I'd suggest you read the ICLR paper[1] which shows clearly the difference between the backbones at various latencies in Figure 1.
> For many domain-specific (often less common and odd dimensioned) objects, downscaling will severely reduce recall.
We released an entire paper[2] at Neurips about the long-tail transferability of models across a multitude of domains and benchmarked RF-DETR against that benchmark. The Apache 2.0 model is pareto optimal over the larger PML model at latencies less than the XL size.
(I'm one of the co-founders of Roboflow and worked on RF-DETR and RF100-VL.)
That may be true for legacy CNNs but very few production use-cases require such a large resolution with DETRs. The latency scales quadratically with the resolution.
Regardless, you can do whatever resolution you want with the Apache 2.0 model. Just change the config at runtime; it was trained to be resolution agnostic.
You are correct that we also released larger models with a larger backbone under a different, non open-source license.
Suspect choice for the paper to only include a single DETR from 2022 in the headline pareto chart and claim to have "the strongest AP–latency trade-off"... Clearly the authors were aware of models that exceed theirs given they even mentioned some of them in the introduction.
> In parallel, DETR [5] cast detection as end-to-end set prediction, and its real-time descendants (RT-DETR [98], D-FINE [55], DEIM [21], RF-DETR [62]) have narrowed the accuracy gap with CNN based detectors on standard benchmarks.
It’s a big improvement if you’re already paying them but, given their aggressive approach to licensing, I can’t imagine why anyone would choose to use an Ultralytics model on a new project in 2026. You’re just asking to be shaken down and have to pay off a large bill down the line.
We (Roboflow) have had early access to this model for the past few weeks. It's really, really good. This feels like a seminal moment for computer vision. I think there's a real possibility this launch goes down in history as "the GPT Moment" for vision.
The two areas I think this model is going to be transformative in the immediate term are for rapid prototyping and distillation.
Two years ago we released autodistill[1], an open source framework that uses large foundation models to create training data for training small realtime models. I'm convinced the idea was right, but too early; there wasn't a big model good enough to be worth distilling from back then. SAM3 is finally that model (and will be available in Autodistill today).
We are also taking a big bet on SAM3 and have built it into Roboflow as an integral part of the entire build and deploy pipeline[2], including a brand new product called Rapid[3], which reimagines the computer vision pipeline in a SAM3 world. It feels really magical to go from an unlabeled video to a fine-tuned realtime segmentation model with minimal human intervention in just a few minutes (and we rushed the release of our new SOTA realtime segmentation model[4] last week because it's the perfect lightweight complement to the large & powerful SAM3).
We also have a playground[5] up where you can play with the model and compare it to other VLMs.
We (Roboflow) have had early access to this model for the past few weeks. It's really, really good. This feels like a seminal moment for computer vision. I think there's a real possibility this launch goes down in history as "the GPT Moment" for vision.
The two areas I think this model is going to be transformative in the immediate term are for rapid prototyping and distillation.
Two years ago we released autodistill[1], an open source framework that uses large foundation models to create training data for training small realtime models. I'm convinced the idea was right, but too early; there wasn't a big model good enough to be worth distilling from back then. SAM3 is finally that model (and will be available in Autodistill today).
We are also taking a big bet on SAM3 and have built it into Roboflow as an integral part of the entire build and deploy pipeline[2], including a brand new product called Rapid[3], which reimagines the computer vision pipeline in a SAM3 world. It feels really magical to go from an unlabeled video to a fine-tuned realtime segmentation model with minimal human intervention in just a few minutes (and we rushed the release of our new SOTA realtime segmentation model[4] last week because it's the perfect lightweight complement to the large & powerful SAM3).
We also have a playground[5] up where you can play with the model and compare it to other VLMs.
Wonder if you can subtract these vectors to get the opposite effect and what that ends up being for things like sycophancy or hallucination.
I also wonder what other personality vectors exist.. would be cool to find an “intelligence” vector we could boost to get better outputs from the same model. Seems like this is likely to exist given how prompting it to cosplay as a really smart person can elicit better outputs.
I've been reflecting a bit on this and remembering what it used to be like when I did hackathons regularly a decade or so ago. This project seems on-par with the type of 48 hour hackathon project I used to do (assuming CLIP had existed), but now I was able to do it in 2 hours instead of 48.
I can't imagine someone non-technical building something like this with prompting. The success of the project was highly dependent on my direction of the model to do what I wanted it to do (even though I gave it leeway in exactly how to do it). It did feel a bit like managing another engineer to do something vs doing it myself.
I don't use agents like this in my day to day work yet (I experimented with OpenHands a couple of months ago but it was frustrating, expensive, and took just as long as doing the task myself). But I'm thinking I probably will be a year from now.
A few times when the model got stuck I copy/pasted some stuff into o1 and pasted its response back into v0 (felt kind of like "escalating" to a more senior engineer) and that helped it get unstuck. Future models will be even more capable than o1. I imagine there will likely need to be a UI for "bringing in the big guns" of a smarter model in the future even if the grunt-work is done by a fast+cheap base model.
There's probably also something to letting the model "speak its native tongue". I don't know next.js but letting the model work with patterns it's been trained on probably helped it be more effective (compared to having OpenHands work in my own codebase using a structure it's unfamiliar with).
Hey all, sharing a project we made in 2 hours at the Vercel+NVIDIA hackathon last week.
While the app is cool, the thing that blew my mind is that the entire app was coded by Vercel's v0 agent. In other words: I did not write a single line of code to create the app (though my teammate did write the backend scraper & DB filler by hand).
Is there any Docker alternative on Mac that can utilize the MPS device in a container? ML stuff is many times slower in a container on my Mac than running outside
It’s sad that only Google can (and honestly a bit surprising that Google hasn’t) use multimodal video models to index the semantic contents & transcripts of these videos for search. Huge long tail of unique content.
If you do it naively your video frames will buffer waiting to be consumed causing a memory leak and eventual crash (or quick crash if you’re running on a device with constrained resources).
You really need to have a thread consuming the frames and feeding them to a worker that can run on its own clock.
We’ve got an open source pipeline as part of inference[1] that handles the nuances (multithreading, batching, syncing, reconnecting) of running multiple real time streams (pass in an array of RTSP urls) for CV models like YOLO: https://blog.roboflow.com/vision-models-multiple-streams/
Tried it a few weeks ago for a task (had a few dozen files in an open source repo I wanted to write tests for in a similar way to each other).
I gave it one example and then asked it to do the work for the other files.
It was able to do about half the files correctly. But it ended up taking an hour, costing >$50 in OpenAI credits, and took me longer to debug, fix, and verify the work than it would have to do the work manually.
My take: good glimpse of the future after a few more Moore’s Law doublings and model improvement cycles make it 10x better, 10x faster, and 10x cheaper. But probably not yet worth trying to use for real work vs playing with it for curiosity, learning, and understanding.
Past: founder of Hatchlings, www.hatchlings.com
Contact: https://twitter.com/braddwyer (DMs Open)