I've been using it for a while. The insistence of keyboards on having a large bar of autocorrect suggestions taking valuable vertical space annoys me to no end.
I really liked using Fleksy which let you swipe up and down on the keyboard to change autocorrect results, including adding words to your dictionary. I'm still not sure if FUTO even has that option.
I feel that. I really do. But I also LOVED the Avatar crossover. To be fair, I haven't played any other ones, but this one played so well and seemed to be very well thought out. They really did the IP justice.
It's also probably worth pointing out that Lego was nearing bankruptcy and was saved by a ton of licensing (and Ninjago, to be fair). Fortunately, they've used that income stream to still consistently put out a lot of high quality first party sets. Hopefully WotC doesn't lose sight...
I love systemd timers! I've slowly moved all of my ansible-deployed cron jobs to timers (now just an ansible copy!). The integration with journalctl, especially in a newer OS like Debian 13 where syslog is gone, is really nice. It's also really nice to be able to start the service manually for debug. Having a cron job that didn't work was an annoying exercise in copy/pasting or writing an extra shell script. Don't even get me started on the black hole of cron job stdout. I can monitor systemd services like I already do and get a notification on failure.
I've noticed more and more open source projects recommending timers as a deployment method and I think that's great!
I wonder if you would get good enough results by just extruding two separate filaments simultaneously. Sure, they won't fully mix, but with thin enough layers, you'd benefit from the same visual processing that makes alternating layers look like a solid color...
> In further digging, we noticed that the URL the phone opens up is “kira-abboud.com,” a website that references fashion influencer “@kirasfashionfinds.” Notably, this exact URL isn’t listed anywhere on Abboud’s social media, and the affiliate codes don’t match up either. The redirect coming from Motorola phones is using Amazona affiliate code “sramz-kff-008-20” which is completely different from any of the codes we saw from links shared by Abboud’s accounts and linked websites.
Something funny is up; this doesn't seem deliberate.
> The standard defense for something like this is "the plugin is a separate work, so it's not subject to copyleft." That argument falls apart on contact with the actual software. BS cannot do its primary job without the plugin. The plugin cannot do anything without BS.
But that's just not true? You can connect a printer in LAN/dev mode and print directly from slicer to printer. There are apparently some issues with more complex network setups but that seems to be the exception rather than the rule.
I think the concerns he has generally are valid, but I have yet to see something from a legal perspective (e.g. precedent) that convinces me this constitutes a license violation. Would love to see one.
I wish there were a "strict" yaml. Another subset a la json, where you don't have nonsense like no === false, but "no" does not, but you also get the block style which to me is easier to read and write. I don't mind requiring quotes for strings. Modern IDEs make it easy enough and it removes ambiguity.
It's surprising to me that bun is so much faster serving web requests. The article mentions Zig as a factor, but is micromanaging memory really gaining over 2x vs node?
Similarly, it seems, though they didnt exactly say, that they're running bun with a warm package cache... What about the others? Do they have caches?
I don't think so. They can already track popularity very effectively because they control makerworld, and they could have Bambu studio, the app, and the printer phone home too. I don't think they care enough about the tiny tiny minority of users running orca with a LAN only printer.
More likely, it's technical incompetence. It's just easier (for their cloud) to send everything through their cloud
I don't think they baited and switched? I bought my P1S before the whole LAN mode debacle and even then it was all or nothing on the cloud. I just went with the cloud because they were using some IGMP stuff for the local connection, but I had the printer on a separate VLAN and pfsense IGMP proxying was broken.
A different way of looking at it is that Bambu is saying if you want to use their cloud you have to send everything through their cloud. Stupid? Sure. It's very much a technically solvable problem. But I don't think there was any rug pull (this time; in Jan 2025 they tried...)
I think this is all more out of incompetence than malice. Something bad happens, exposing wildly inadequate programming expertise, they panic and over correct, and the community pushes back. They're great at making 3D printers, terrible at cloud infra.
This doesn't apply because their cloud service, which has the "technological measure" is not the "covered work", as incompetent as the measure might be...
In this case, you're signing up for an account and entering into the user agreement to do so. There's a whole separate legal discussion to be had about the whole "scroll past it all and just click accept to make it to away" thing...
This is not necessarily true. There are technical solutions to preserve privacy, end to end encryption being a very common one. That being said, Bambu strikes me as a very competent 3D printer designer, but not so much a competent software designer.
> rental model
I don't think this really applies to a hardware company selling 3D printers. You can always still use SFTP or SD cards to print. A big selling point for them is the ecosystem and being able to, for example, find a model on the app while you're on the road, send it to your printer, and have it be done by the time you get home. If this weren't cloud enabled, most of their customers wouldn't be able to get it to work because things like VPN or tailscale are well beyond them.
They asked him to remove it and threatened to send a cease and desist. They didnt even send the cease and desist, which they very well could have. Hardly an accurate characterization.
> They bought a printer that works locally, and Bambu wants to remove features from the product they paid for. And it's the _customer_ who's actually running this slicer and impersonating Bambu.
This just isn't true. You can still run it locally and still use third party slicers locally.
I'm supportive of Jeff's general philosophy towards open source, but this feels a little disingenuous. Did Bambu mishandle the situation? Absolutely. But we need to stop vilifying companies for being cloud-first. The reality is that 99% of their users set up the printer and app using the cloud service. It's easy and convenient. The slicer is still open source, and you can still use their printers without the cloud. (Yes there was some fighting after their security issue in 2025, but they did put in an effort to maintain compatibility with third party slicers even if it was misguided and/or out of touch.
Bambu has every right to restrict or limit how their cloud service is used, even if they do it in a completely insecure and trivially reproducible way (a user agent).
I'm curious from a legal perspective - the user agent in the Bambu slicer is AGPLed, so copyright wise it seems anyone could put it in their own slicer too. Nonetheless, something feels wrong to me about saying you're a Bambu slicer when you're actually not. Bambu is going after it because of the user agreement, but is there any other legal standing for complaint?
The license isn't the issue. It's the User Agreement. Bambu is claiming that the fork is allowing, enabling, (and/or promoting, encouraging, etc) users to violate the agreement with Bambu to not use their cloud with third party software.
I'm fairly certain user agreements have been used for suing makers of game cheats and other similar things. Certainly in the industry I work in, there was a company making third party software and integrating it with the industry standard tool without going through the official channels, which caused people to violate the user agreement when used. They got sued and settled.
True. But it means you have to get it into the installer/image which just doesn't seem worth it for something that, as you point out, doesn't happen all that frequently.
I really liked using Fleksy which let you swipe up and down on the keyboard to change autocorrect results, including adding words to your dictionary. I'm still not sure if FUTO even has that option.