Reusable Software? Just Don't Write Generic Code(josdejong.com)
josdejong.com
Reusable Software? Just Don't Write Generic Code
http://josdejong.com/blog/2015/01/06/code-reuse/
20 comments
I believe the only reliable way to make reusable code is to reuse it as you write it. If your team is working on several projects at the same time which have some overlap, then by all means if something could be useful for three or more projects, get together with everyone else and strive to write something you can all use. It will be reused immediately, so that's clearly reusable. But don't try to write something you'll reuse in the future; you don't have enough information to know if you are building the right thing, and you won't know if you did until you try to reuse it.
I have regrets most times I did not follow this advice.
Premature generalization is the root of all evil. (With apologies to Don Knuth)
The original formulation may have been a real problem at the time it was made, but in our time running into ugly code due to misguided optimization seems pretty rare. Code that attempts - and almost always fails - to be generic, and instead ends up overcomplicated and awkward to use, on the other hand...
It's not just 3rd party code either, in my own teams it's not rare I find myself arguing for KISS and YAGNI. Sometimes I prevail, sometimes the premature generalizers do.
The original formulation may have been a real problem at the time it was made, but in our time running into ugly code due to misguided optimization seems pretty rare. Code that attempts - and almost always fails - to be generic, and instead ends up overcomplicated and awkward to use, on the other hand...
It's not just 3rd party code either, in my own teams it's not rare I find myself arguing for KISS and YAGNI. Sometimes I prevail, sometimes the premature generalizers do.
When we add a layer of code on top of a system what we're doing is essentially locking or coupling degrees of freedom from the layer below. Trying to go the opposite way at the same time often is delusional.
When I'm tempted to make something generic, it's most of times because I've built a too-focused monolithic solution to my problem. Genericity should be built bottom-up from the start by progressing up in small layers with controlled (and meaningful) interface surface reduction.
Genericity is attained by composition.
When I'm tempted to make something generic, it's most of times because I've built a too-focused monolithic solution to my problem. Genericity should be built bottom-up from the start by progressing up in small layers with controlled (and meaningful) interface surface reduction.
Genericity is attained by composition.
There used to be a fashion in some parts [1] that rather than building an application to do X you would build a framework for applications of that type.
Of course, the vast majority of these in-house application frameworks ended up being used for precisely one application or are overtaken by frameworks that succeed in the wider market.
1. Particularly the enterprise Java world in the bad old days.
Of course, the vast majority of these in-house application frameworks ended up being used for precisely one application or are overtaken by frameworks that succeed in the wider market.
1. Particularly the enterprise Java world in the bad old days.
rather than building an application to do X you would build a framework for applications of that type.
...and then someone comes up with the idea of building a framework for building frameworks to do X: http://discuss.joelonsoftware.com/default.asp?joel.3.219431....
...and then someone comes up with the idea of building a framework for building frameworks to do X: http://discuss.joelonsoftware.com/default.asp?joel.3.219431....
Indeed, I managed to control myself by not posting that link as it sometimes upsets people.
NB I did comment on that thread on Joel On Software.... :-)
NB I did comment on that thread on Joel On Software.... :-)
That's kind of how we were encouraged to code (I was learning during the dot.com boom, when Java was all popular).
I think the difference now is that some high quality fairly generic framework have emerged (there was nothing like Rails or Django back in 2000 as far as I am aware). Why build that part when someone else has done the hard work for you? Its well tested, documented, and there is a large knowledge base out there. (I dislike it when I hear about in house frameworks when I am in a job interview, as those will generally not be as well documented, and only a few "in house rockstars" will really understand them).
I think the difference now is that some high quality fairly generic framework have emerged (there was nothing like Rails or Django back in 2000 as far as I am aware). Why build that part when someone else has done the hard work for you? Its well tested, documented, and there is a large knowledge base out there. (I dislike it when I hear about in house frameworks when I am in a job interview, as those will generally not be as well documented, and only a few "in house rockstars" will really understand them).
Or failure to generalize might hide a failure to abstract out properly.
I've always found the idiom "reinventing the wheel" to be somewhat amusing, since the wheels on a car are very different from the wheels on a bike, office chair, train, etc., and you certainly can't substitute one for the other (or you can try, but it usually doesn't work out so well.) I see the fact that a "generic wheel" does not exist in the real world to be evidence that it is impossible to have such a thing in software too. Every application is unique, and good software engineering depends on being able to see what is unique and what can be reused from something else.
I think the distinction between reinventing the wheel and implementing a domain specific wheel is important.
I prefer the idiom "redesigning a roof". Humans build houses since thousands of years, and we still need architects, because every roof is slightly different depending on weather, climate, available material, size and shape.
Weird. To make software more generic, I usually reduce the number of assumptions and edge case handling that goes in the APIs. If you start adding options to handle more cases, that's just not "generic". But in any case, we should start from the use cases, and avoid mission creep... and an interesting question becomes: how much do you need to design for future use cases, and how much do you need to design for the use cases currently at hand?
Indeed. I think the article uses the term "generic software" in a way unrelated to, say, "generic programming" (which is a good thing and, like you say, it actually means reducing assumptions). What the author probably means is "big ball of mud software that must have catch-all solutions and extension points to handle all possible cases". Unfortunately the terminology is confusing.
Sounds to me that the real issue is either mission creep, or a bad programmer/designer who doesn't see that the "generic" piece of code now needs to be split into components? In my practice, an issue that comes back often and seems to be related though, is trying to anticipate future use cases. Maybe a failure to anticipate reasonable future use cases is what leads to the mess: the first solution is not "generic" enough, and therefore more and more options are added as new use cases are discovered. But I find it hard to balance future use cases and immediate requirements.
Rule of 3 should apply to interfaces. Don't make an interface unless there are at least 3 implementations.
I disagree. I think interfaces can be a powerful way to think about what you want to do without having to focus too much on how it will be done, compartmentalise that 'part' and then move on to something else.
Not necessarily until there are 3 implementations existing, since by that time it could be difficult to factor out the interface, but I think it's at the time that you very clearly see that there will be at least 3 implementations. The problem you want to avoid is creating interfaces for generality when you don't see a clear need for it yet.
I agree. What's the point of making generic code ? Do you really think your code will be re-used in the future for similar cases ? If not, better do what you've been asked and not dwell into abstraction.
Time goes by pretty quickly, things change, and so much code is being made obsolete every year. Remember, it's easier to write code than to read it. Thus, write code that is readable and that does the job, not code that does something abstract and "lead the way for similar cases".
To me inheritance and object oriented programming should let people make libraries, but not make end user applications. Application are imperative and follow scenarios and use case, they're not OOP. Most programmers should just use OOP and inheritance when they use libraries, not in other cases. You don't need to make a library very often, thus, don't try to use inheritance or to write a library.
Time goes by pretty quickly, things change, and so much code is being made obsolete every year. Remember, it's easier to write code than to read it. Thus, write code that is readable and that does the job, not code that does something abstract and "lead the way for similar cases".
To me inheritance and object oriented programming should let people make libraries, but not make end user applications. Application are imperative and follow scenarios and use case, they're not OOP. Most programmers should just use OOP and inheritance when they use libraries, not in other cases. You don't need to make a library very often, thus, don't try to use inheritance or to write a library.
Maybe that's too short sighted. Constantly rewriting code has a big cost. A huge cost actually. I see it at my work everyday: there is a pervasive (fashionable?) attitude that no code lives more than 3 years, and we have incessant "migrations" to new and better systems. You wouldn't believe how costly those migrations are, including through losing good people who don't want to suffer through them (and I am sympathetic to their plight, it's really horrible)...
> What's the point of making generic code ? Do you really think your code will be re-used in the future for similar cases ?
Re-use is only one aspect of generic code. The other, no less important aspect, is a reduction of possible implementations, which results in less bug-prone, easier to read code.
Re-use is only one aspect of generic code. The other, no less important aspect, is a reduction of possible implementations, which results in less bug-prone, easier to read code.
The first half of the post was great, but I don't fully agree with the points about Java.
Whilst inheritance is a problem, it seems to me we've been preferring composition over inheritance for a long time now. Single inheritance is mentioned as if it is a bad thing, but I'm not sure anyone that has seen (or worse, tried to implement) multi-inheritance in C++ would agree. Finally, I'm not convinced having a interface for a single concrete class is a bad thing. Sure, it adds some boilerplate (Java's main problem) but it forces the developer to think about the public API and makes testing easier.
Whilst inheritance is a problem, it seems to me we've been preferring composition over inheritance for a long time now. Single inheritance is mentioned as if it is a bad thing, but I'm not sure anyone that has seen (or worse, tried to implement) multi-inheritance in C++ would agree. Finally, I'm not convinced having a interface for a single concrete class is a bad thing. Sure, it adds some boilerplate (Java's main problem) but it forces the developer to think about the public API and makes testing easier.
The first part of the article mixes genericity with feature-richness seamlessly. I don't necessarily agree that creating generic interfaces means bloatness, but I think a lot of the pains that the author mentions come from the way OO languages, especially the older ones, do generics (yes, inheritance abuse). Haskell is one example of a language that tries to achieve abstract and generic interfaces that are elegant (and type safe!). Another beauty of such high-level languages is that you can always create a DSL to match the abstraction level of your problem domain.
I think there should be some sort of distinction between different meanings of "general" or "generic". One means "covering as many use cases as we can think of" and is criticised here. Another means "not requiring more of its inputs than necessary", which is a different thing. Haskell does the latter well, as you mention.
I don't think the author truly means generic programming. He is (in my opinion) confusing terms. What he probably means is over-engineered software with too many features and/or needless extensibility that introduces unacceptable complexity.
Generic programming actually reduces assumptions, is less bug prone, and is (probably) not what the author was thinking of.
Generic programming actually reduces assumptions, is less bug prone, and is (probably) not what the author was thinking of.
Haskell's type system is great, unless you need semi unification (equivalent to nominal subtyping and imperative assignment), then it's not so great anymore. Unification is pretty limiting.
Could you explain a bit more? A quick search suggests that semi-unification is equivalent to Milner-Mycroft typeability, which is polymorphic recursion, which Haskell does indeed have.
http://homepages.dcc.ufmg.br/~camarao/SUP/
http://en.wikipedia.org/wiki/Polymorphic_recursion
http://homepages.dcc.ufmg.br/~camarao/SUP/
http://en.wikipedia.org/wiki/Polymorphic_recursion
Right, but not without type inference. One of the reasons Scala's type system is quite complicated is that it can do semi-unification to achieve local type inference, at least (semi-unification is undecidable in general, and Scala makes a best effort, I believe).
How does Haskell deal with refs?
How does Haskell deal with refs?
I'm not sure what you mean. I'm not aware of any type inference difficulties with IORefs or STRefs. Polymorphic recursion, on the other hand, does often (or maybe always) require an explicit type signature.
If you were to do type inference across mutable reference assignments, you would have to do some semi unification. I don't think haskell does, even ML treats refs very strangely.
That sounds like something you'd use the state monad for if I understand correctly.
Can you provide an example of semi unification where Haskell would be not so great?
Can you provide an example of semi unification where Haskell would be not so great?
> Then, a new, fresh alternative arises and moves your library into oblivion. This new library is awesome. It doesn’t suffer from a bloated API, it just works. It does more or less the same as your library but is faster and easier to use. Over time though, this new library will go through the same cycle as yours. It gets bloated too and will be replaced with something fresh at some time.
I have been recognizing this cycle more and more, I think it's almost a fundamental law of software engineering -- the war between flexibility and over-engineering/over-abstraction.
I have been recognizing this cycle more and more, I think it's almost a fundamental law of software engineering -- the war between flexibility and over-engineering/over-abstraction.
As the maintainer of such a library I think it's your duty to refrain from adding every requested feature. If your users need more flexibility then break down your library into building blocks that will allow them to build exactly what they need by composition.
Reusable code isn't generic, reusable code is focused and built out of (re)composable parts. Reusability IS composability.
Reusable code isn't generic, reusable code is focused and built out of (re)composable parts. Reusability IS composability.
I have had the experience where I _think_ I (or a distributed open source team on a project I commit to) am doing what you suggest -- but then retrospectively, I see it still resulted in too much complexity through over abstraction/engineering.
I think you've got the right idea, but it still doesn't always make it easy.
The places I have found the most success in my design, even looking back, are when I constructed a library for a domain I was already well familiar with (often having experienced how another library handled it), and where I had the time to do it slowly and carefully, deliberately considering each design choice and the simplest possible way to achieve each desired path while still allowing for flexible reconfiguration. When working with other developers, this often, as well, involves some initial disagreement about the best solution that accomplishes without adding unneeded complexity. And sometimes even I start getting impatient with the slowness of the deliberate process and consensus building -- it's easier to do by myself (which takes even more time).
These are rare circumstances that allow for such slow coding though, in the pressure to get things out quick and get them used and then quickly iterate. We have a (hard-won, reaction to other harmful development ideologies) overall ethos in our industry(ies) of getting things out quickly without needing to get them perfect or fully understand where it will lead you, and then iterate based on feedback. That works pretty well for UI, although it can still contain the same pitfalls. It is even harder for infrastructural architecture though, it's probably still possible as long as you are careful and deliberate with your iterations (although knowing when to break backwards compat is still a trick), but, anyway, I don't think it's easy.
I think you've got the right idea, but it still doesn't always make it easy.
The places I have found the most success in my design, even looking back, are when I constructed a library for a domain I was already well familiar with (often having experienced how another library handled it), and where I had the time to do it slowly and carefully, deliberately considering each design choice and the simplest possible way to achieve each desired path while still allowing for flexible reconfiguration. When working with other developers, this often, as well, involves some initial disagreement about the best solution that accomplishes without adding unneeded complexity. And sometimes even I start getting impatient with the slowness of the deliberate process and consensus building -- it's easier to do by myself (which takes even more time).
These are rare circumstances that allow for such slow coding though, in the pressure to get things out quick and get them used and then quickly iterate. We have a (hard-won, reaction to other harmful development ideologies) overall ethos in our industry(ies) of getting things out quickly without needing to get them perfect or fully understand where it will lead you, and then iterate based on feedback. That works pretty well for UI, although it can still contain the same pitfalls. It is even harder for infrastructural architecture though, it's probably still possible as long as you are careful and deliberate with your iterations (although knowing when to break backwards compat is still a trick), but, anyway, I don't think it's easy.
I completely share your experience. It almost always takes me two complete drafts before getting an architecture right anyway. This probably looks awful to people who like to "ship" more than they like to "build". I like to build.
Converging towards the simplest representation of a problem's solution takes a strong ability to let loose on your mental pictures in order to escape local maxima, and time. What we do is essentially rewiring our brains around a problem. In this respect we are bound by biological processes. There is no shortcut. Every path that looks like a shortcut will lead to conceptual pollution that will only grow like the square of the team size and seed what we use to call technical debt.
Converging towards the simplest representation of a problem's solution takes a strong ability to let loose on your mental pictures in order to escape local maxima, and time. What we do is essentially rewiring our brains around a problem. In this respect we are bound by biological processes. There is no shortcut. Every path that looks like a shortcut will lead to conceptual pollution that will only grow like the square of the team size and seed what we use to call technical debt.
Yes, you said it well.
It requires a very thorough understanding of the domain you are working to create a solution in. And time and effort.
The actual context most software engineers find themselves in does not usually encourage (or even allow?) that kind of development.
Creating quality software really is more 'expensive'.
It requires a very thorough understanding of the domain you are working to create a solution in. And time and effort.
The actual context most software engineers find themselves in does not usually encourage (or even allow?) that kind of development.
Creating quality software really is more 'expensive'.
Yes it tends to be more expensive at first. But look, as a community we can't even (yet) agree on what makes quality. It is hard to sell something you can't clearly explain.
I think it is more of a feature creep thing.
Personally it reminds me of Ubuntu, which was a stripped down, fast spin off of Debian back in the day. It started getting popular, and more and more stuff got added, now it is at least as bloated as Red Hat or the other distros, which it had been compared to when it first started getting attention.
Personally it reminds me of Ubuntu, which was a stripped down, fast spin off of Debian back in the day. It started getting popular, and more and more stuff got added, now it is at least as bloated as Red Hat or the other distros, which it had been compared to when it first started getting attention.
I don't understand: I thought that flexbility and abstraction went together, rather than against each other.
Yes, agreed. It's just that abstraction and over-engineered complexity often also go together -- it's abstraction and simplicity that can (sometimes, even often, but not always) be enemies.
The tension I think I've seen through experience is between maximizing flexiblity and simplicity. Maximizing flexibility without extreme care can often lead to non-simple, over-engineered, over-abstracted, complexity.
The tension I think I've seen through experience is between maximizing flexiblity and simplicity. Maximizing flexibility without extreme care can often lead to non-simple, over-engineered, over-abstracted, complexity.
I think this applies to almost everything except for software 'environments' (such as operating systems, virtual machines, etc...) and frameworks (to some extent).
Software environments and frameworks need to be generic because they have to support a very wide range of software behaviors on the layer above.
Another point; people tend to think that the terms 'monolithic' and 'modular' are mutually exclusive when describing software - But it's not the case.
Most operating systems are monolithic by nature, but many of these OSes are also modular in the sense that you can replace or customize various parts of them without breaking the system.
The Linux kernel does a lot of different things - It's monolithic by design. It worked out in this case - Otherwise we'd all be using MINIX. Monolithic isn't always a bad thing.
Software environments and frameworks need to be generic because they have to support a very wide range of software behaviors on the layer above.
Another point; people tend to think that the terms 'monolithic' and 'modular' are mutually exclusive when describing software - But it's not the case.
Most operating systems are monolithic by nature, but many of these OSes are also modular in the sense that you can replace or customize various parts of them without breaking the system.
The Linux kernel does a lot of different things - It's monolithic by design. It worked out in this case - Otherwise we'd all be using MINIX. Monolithic isn't always a bad thing.
"Islands of functional code in a sea of imperative code." - Paraphrased Erik Meijer
I've found that my most reusable code is composed of pure functions. The imperative stuff is always changing depending on the circumstances but my functions are a solid base upon which I build.
I've found that my most reusable code is composed of pure functions. The imperative stuff is always changing depending on the circumstances but my functions are a solid base upon which I build.
This reminds me of a blog post by Anthony Ferrara:
http://blog.ircmaxell.com/2014/10/an-open-letter-to-php-fig....
http://blog.ircmaxell.com/2014/10/an-open-letter-to-php-fig....
Concerning generic code, I think we should use a rule inspired from the quote attributed to Einstein "Everything should be made as simple as possible, but not simpler".
The generic code rule : "Everything should be made as generic as possible, but not more generic than necessary". That means that every time we see a pattern in the code, we can try to write a generic version. Be that we should never try to do a generic version of something if we don't need it somewhere in the code.
This rule respect, IMHO, both DRY and YAGNI principle.
The generic code rule : "Everything should be made as generic as possible, but not more generic than necessary". That means that every time we see a pattern in the code, we can try to write a generic version. Be that we should never try to do a generic version of something if we don't need it somewhere in the code.
This rule respect, IMHO, both DRY and YAGNI principle.
I wonder if the converse guideline would actually be more useful: Everything should be made no more generic/abstract than actually neccesary.
Phrasing it as "should be made as generic as possible" is just what leads us down the primrose path to over-engineered complexity, no?
Abstraction maybe doesn't at first seem to use like it should be the enemy of simplicity -- certainly we can think of cases where abstraction leads to beautiful simplicity, and that's in fact a large part of what makes software engineering work, and what we enjoy about it.
But in actual life, the pursuit of "as generic as possible" (even if qualified by 'not more generic than necessary") seems to often be the primary motivation leading to conflict with "as simple as possible but not simpler."
Phrasing it as "should be made as generic as possible" is just what leads us down the primrose path to over-engineered complexity, no?
Abstraction maybe doesn't at first seem to use like it should be the enemy of simplicity -- certainly we can think of cases where abstraction leads to beautiful simplicity, and that's in fact a large part of what makes software engineering work, and what we enjoy about it.
But in actual life, the pursuit of "as generic as possible" (even if qualified by 'not more generic than necessary") seems to often be the primary motivation leading to conflict with "as simple as possible but not simpler."
You've made a subtle change of meaning there. By going from:
> should be made as generic as possible
To:
> should be made no more generic/abstract than actually neccesary.
You've introduced a subjective judgment call. The result is a tautology, since we could rephrase it to:
> should be made no more generic/abstract than it should
Whether or not we agree with the quotes from Einstein or the parent, at least they're (mostly) objective, and tell us how to proceed: if anyone finds a way to simplify or generalise a result (without sacrificing correctness), they should do it.
> should be made as generic as possible
To:
> should be made no more generic/abstract than actually neccesary.
You've introduced a subjective judgment call. The result is a tautology, since we could rephrase it to:
> should be made no more generic/abstract than it should
Whether or not we agree with the quotes from Einstein or the parent, at least they're (mostly) objective, and tell us how to proceed: if anyone finds a way to simplify or generalise a result (without sacrificing correctness), they should do it.
I don't know if it's any different in objective/subjective, I think, as applied to software engineering, anyway, there's always a subjective element.
I suppose the corresponding operationalization to the way I've phrased it is: Don't add genericness unless you are unable to find a way to proceed with what is needed without it.
I think (and I think the OP thinks) the problem we have more often is people adding too much abstraction, not too little. If so, we need a rule that discourages, rather than encourages, the problem.
I suppose the corresponding operationalization to the way I've phrased it is: Don't add genericness unless you are unable to find a way to proceed with what is needed without it.
I think (and I think the OP thinks) the problem we have more often is people adding too much abstraction, not too little. If so, we need a rule that discourages, rather than encourages, the problem.
I don't think that's a rule so much a consequence of following DRY and YAGNI to the letter. If you don't make something until you need it, and you don't repeat yourself, by definition, you'll make generic solutions for when they're needed.
The issue isn't the concept and understanding it, the issue is that it's hardly ever straightforward to figure out if you need something, or if refactoring your copy/pasted code so you're not repeating yourself is worth the effort, given there are other things that need to be done. The hard part about software is balancing the tradeoffs between time, money, technical challenges, product challenges, not the ground rules.
The issue isn't the concept and understanding it, the issue is that it's hardly ever straightforward to figure out if you need something, or if refactoring your copy/pasted code so you're not repeating yourself is worth the effort, given there are other things that need to be done. The hard part about software is balancing the tradeoffs between time, money, technical challenges, product challenges, not the ground rules.
I have fallen into this pitfall myself a couple of times. Trying to write reusable generic code on the idea that we would be able to reuse it later for a similar project, but in practice it almost never happens. New projects end up being way too different anyway and in the end it took more time to try to make generic reusable code for usuable by two projects rather than simply writing the two projects with completely seperate code bases.
Until you realize that you have X different implementations of the "same" functionality. All because no one bothered to look at existing items, or never bothered to make their code a little bit generic so that those that look at it later on know how to adapt it to their needs.
In essence, they're both partially to blame. There are times when generic code is unneeded, and other times when it will get used in the future. The trick is to know the difference, before it's too late and you have X different variations of similar functionality.
In essence, they're both partially to blame. There are times when generic code is unneeded, and other times when it will get used in the future. The trick is to know the difference, before it's too late and you have X different variations of similar functionality.
The component will have a more extensive API and configuration. This requires more knowledge on the clients side, and makes debugging harder as more things can go wrong. Developing and debugging the component itself becomes harder as one needs to account for more and more edge cases.
Back "in the day", devs and managers used to call this job security, and was a preferred outcome for most of the people I worked with.
Back "in the day", devs and managers used to call this job security, and was a preferred outcome for most of the people I worked with.
It's difficult to tell what your tone is, but it is horrible working with people who are concerned only or primarily with job security. It leads to people holding on to information, being hesitant or outright refusing to document procedures and processes, and absolutely denying that there may be a better way to do something than the way they happen to be an expert in.
Yes, I couldn't agree more.
But, unfortunately, this was the mindset in corporate IT back 10-15 years ago, and in fact the last onsite contract job I worked a few months ago seemed to contain this attitude, so I was thinking in some ways, things are still the same.
I couldn't really stand it back then, which is why I moved to contracting/consulting.
But, unfortunately, this was the mindset in corporate IT back 10-15 years ago, and in fact the last onsite contract job I worked a few months ago seemed to contain this attitude, so I was thinking in some ways, things are still the same.
I couldn't really stand it back then, which is why I moved to contracting/consulting.
I've only been in the job market for 6/7 years, and only half of that in a very corporate environment. Luckily it's (in my limited experience) an individual character trait and not any systemic cultural issue so far.
I, too, have noticed a big change along those lines, which is why I was very careful to use the hated "back in the day" phrase.
There is no doubt that due to the pace of technological change nowadays, the idea that devs and managers can hide behind a bloated solution and rake in profit! are pretty much long gone.
There is no doubt that due to the pace of technological change nowadays, the idea that devs and managers can hide behind a bloated solution and rake in profit! are pretty much long gone.
I treat software like gardening. Don't abstract until it's mature enough.
How does your second sentence apply to gardening?
Let it all grow before starting to remove things.
> Maximizing genericity complicates use
Not exactly. Maximizing genericity leads to a turing-complete language. An API is a set of restrictions you place over a language, completely generalyzing it leads to no API at all.
Not exactly. Maximizing genericity leads to a turing-complete language. An API is a set of restrictions you place over a language, completely generalyzing it leads to no API at all.
Sometimes it's necessary to use interfaces in java even if you will just have one implementation. AOP and proxy creation requires this in some cases.
IDE support for this is great so you do not have to type it twice.
IDE support for this is great so you do not have to type it twice.
I think the point is to use interfaces where necessary, but not where unnecessary. If proxying/AOP/etc. require interfaces, then use interfaces (or don't use proxying/AOP/etc.; the same argument can be applied there too!)
Sometimes generic code is clearer than non-generic code. Although this is rare.
I'd say the opposite is actually true. Often generic code is clearer and less error prone that non-generic code. This is because generic code reduces the number of assumptions you make (e.g. if you can't know the actual type of the elements of a container, there are fewer operations you can apply to them. A function that concatenates two lists cannot accidentally try adding 1 to each element, because it doesn't know whether the elements are numbers. Hence, a whole class of mistakes is eliminated before you get the chance to commit them).
For example, (barring side-effects for simplicity) there is one and only one possible implementation for a function with signature:
For example, (barring side-effects for simplicity) there is one and only one possible implementation for a function with signature:
f: T -> T
g: Int -> Int