Hk, The new Heroku Client written in Go(github.com)

https://github.com/heroku/hk

8 comments

Hi everyone, I'm the new maintainer of hk. It's actually not very new :) You can see that Keith Rarick did most of the work on it over a year ago, along with some other major contributors: https://github.com/heroku/hk/graphs/contributors

What is new is that I moved it to the Heroku org this week and will be spending a lot of my time turning it into a proper replacement for the Heroku Toolbelt & gem.

It's still very early stage software, though. There isn't currently a supported installation method, and it's very far from having all of the necessary features to fully replace the old client. Also, the UX will probably change frequently and things may break, eat your data, etc. So don't rely on it just yet :)

That being said, I'm really excited to see where we can take this in the next few months. Hk is already a great starting point. Go is very fast and lightweight, and offers some nice advantages over Ruby on the distribution & installation fronts.

Hopefully we'll have something exciting to show in a couple months!

pearkes13년 전

I use the two Heroku tools `foreman` and `heroku` regularly. I've recently switched to their Go alternatives, and for one thing, the speed has improved[1].

However, the Heroku client is mostly network bound (communicating with their API), and on an average connection this speedup hardly matters.

I wonder what the other benefits will be?

[1]

  $ time heroku help
  real	0m0.409s
  user	0m0.146s
  sys	0m0.036s

  $ time hk help
  real	0m0.008s
  user	0m0.003s
  sys	0m0.004s

  $ time foreman run echo hello
  real	0m2.062s
  user	0m0.199s
  sys	0m0.100s

  $ time forego run echo hello
  real	0m0.886s
  user	0m0.205s
  sys	0m0.097s

mitchellh13년 전

The benefit would be EASY cross platform support. From experience building Vagrant installers: it's a pain in the butt. Shipping a single binary client would probably simplify things greatly.

ddollar13년 전

There are two reasons I rewrote Foreman in Go. You hit one of them square on the head. A single binary with no dependencies that can be cross-compiled on a Heroku dyno makes things much simpler.

Foreman was originally written in Ruby which ideally means it runs on any machine with a Ruby interpreter. When you get down to it, though, the differences in fork/exec between Ruby 1.8, 1.9, JRuby, Rubinius, etc make this a nightmare scenario of a different sort.

If you go to https://gobuild.herokuapp.com/ddollar/forego/master/darwin/a... you get a working program as a single binary in one step. Using bsdiff I can even ship binary diffs for fast upgrades (this is how `foreman update` works in the new version)

Oh and as a side effect the new Foreman is quite a lot faster to start up (Rubygems initialization is sloooooow)

warmwaffles13년 전

I had no clue `forego` was actually available. This is incredible.

kungfooguru13년 전

Yes! I love this way more than any speed upgrade. When is Vagrant being redone in Go ;)

fderp13년 전

Using the heroku client every day, I noticed this new client does not namespace any of the commands. Subcommands of hk are:

    hk create # create app
    hk destroy # destroy app
    hk apps  # list apps
    hk set    # set config var
    hk unset  #unset config var

Compare to heroku's (preferable, imho) commands:

    heroku apps:create    # create app
    heroku apps:destroy   # destroy app
    heroku apps           # list apps
    heroku config:set     # set config var
    heroku config:unset   # unset config var

The command 'hk set' doesn't tell you any semantic information at all about what it's doing - I prefer the original syntax for its convention of being explicit.

Other than that minor complaint, seems like a really cool project, going to look through the source later.

bgentry13년 전

The commands right now attempt to map directly to unix equivalents where it makes sense. set, unset, & env are the traditional unix commands for modifying the environment.

The main problem I have with the flat, non-namespaced commands is that there will be far too many of them once we've implemented the full command set.

Anyway, as I wrote in my other comment, this is very early software and it has a long way to go before I'll recommend that regular Heroku users rely on it.

zimbatm13년 전

Heroku is going to loose Solaris and a couple of other secondary target OSes if they go down that route. Golang can cross-compile to Linux, Darwin, Windows and a couple of BSDs.

EDIT: It really seems that they are going down that route. They are also working on a Go implementation of Foreman here: https://github.com/ddollar/forego

axaxs13년 전

Gc, the reference implementation, only does the mentioned OSes. Gccgo should work where gcc is available, and is known to work on Solaris. See - http://blog.golang.org/gccgo-in-gcc-471

ithkuil13년 전

hk cannot be compiled with gccgo?

enneff13년 전

I wonder if they have any customers that use Solaris.

4ad13년 전

I am working on a Solaris (illumos rather) port of the gc toolchain. It's halfway there: https://bitbucket.org/4ad/go-sunos

iand13년 전

Just do go build -compiler gccgo hk to build using GCC

4ad13년 전

You have to manually compile the go tool though, as it doesn't come with gccgo.

miloshadzic13년 전

This is the kind of thing that Go shines at.

neya13년 전

On a side note, I would like someone with experience here to tell me how you can actually create command line commands? In this case, they seem to use:

    hk <insert command here>

I would like to do something like:

   abc <some command>

Basically something like a Rails scaffold generator. How difficult/easy is this? Googling didn't help much..

Note: It doesn't have to be built with Golang..

Thanks

Edit: Thanks for the replies :)

Note: It doesn't have to be just Go, I'm just asking in general..

I would basically like to create a scaffold generator. So, when I do

    abc generate test

I would like a file named test.html (or something) generated..

Thanks again..

dscrd13년 전

Perhaps check if this is good enough for you https://github.com/robmerrell/comandante

neya13년 전

Thanks, this is excellent for a Go implementation. And I will definitely use it! I was asking in general though..

iand13년 전

Are you asking how to do this in Go or how to do it in general?

Here's how the hk app does it: https://github.com/heroku/hk/blob/master/main.go#L120

Basically it reads the arguments to the executable and matches them against a built-in list of supported commands and dispatches appropriately.

neya13년 전

Thanks for the link to the source, I was asking in general though.

iand13년 전

Principle is the same in any language. They all provide a way to parse the arguments passed in. You need to examine those and call the right code based on the argument name. Look for something called ARGV or similar in your language. For example:

node.js - http://nodejs.org/docs/latest/api/process.html#process_proce...

python - http://docs.python.org/2/library/sys.html

ruby - http://www.ruby-doc.org/core-2.0.0/ARGF.html#method-i-argv

[deleted]13년 전

neya13년 전

chimeracoder13년 전

You're looking for the "flag" package, in the standard library: http://golang.org/pkg/flag/

walle_13년 전

Do you mean how to do plugins for your application?

I use this route in one of my projects https://github.com/walle/gas/blob/development/bin/gas

Basically, all executables in your PATH that conforms to a naming convention is a plugin. If a match is found it's run.

So in my case you can call both ´$ gas list´ and ´$ gas-list´.

I don't know if this is the best way to do it, my inspiration was how git commands work.

pestaa13년 전

1. Make an executable.

2. Put it in your PATH.

3. Profit.

The long version is more complicated than that, but you need to tell more details first.

oblio13년 전

Frankly, this is how command line interfaces should be created: https://github.com/docopt/docopt

If only it would be ported to more languages...

FLUX-YOU13년 전

  $ hk 47
  Statement: Greetings, meatbag

knocte13년 전

Last time I looked at heroku, I had to install some non-open-source command-line tools to interact with it.

So I'm wondering, is this alternative opensource now?

zimbatm13년 전

The CLI has always be open-source. They even put links to the implementation on the download page here https://toolbelt.heroku.com/

_ak13년 전

Yes: https://github.com/heroku/hk/blob/master/about.go