Power Wastage on an Idle Laptop(randomascii.wordpress.com)
randomascii.wordpress.com
Power Wastage on an Idle Laptop
https://randomascii.wordpress.com/2016/03/08/power-wastage-on-an-idle-laptop/
12 コメント
If you're on Linux and jealous: a similar (but different in a lot of ways too) tool for doing an analysis like this is called "powertop".
I've never gotten useful results from powertop. The model it builds to correlate system events vs. observed power usage always diverges with reality very quickly. In the good case it'll just do something a little silly like conclude that the CPU fan is the ultimate source of all power consumption. In the bad case it'll be something like think that a pair of linux veths uses 3kW (not a typo) of power.
I was the same - mixed results at best. I figured that manually playing with this all the time was the wrong solution and installed TLP instead which seems to work pretty nicely. Not sure if it is mentioned in the linked article, so if not then check it here: http://linrunner.de/en/tlp/docs/tlp-linux-advanced-power-man...
The estimates may be off, but the raw data it reports (context switches, wakeups etc.) is accurate.
I've gotten pretty good results on my all-Intel laptop.
Is this with or without calibration?
[deleted]
[deleted]
I have good experience with powertop.
Yes using powertop, ive been able to get my last intel laptop (thinkpad t440) to ~8W and my latest amd laptop (a hp 745 g3 carrizo) to ~10W. Initial value on the intel laptop from memory was ~24W and on the amd laptop it was 21W.
I'd love to read a blogpost/github repo with how you did it, if you ever write one.
https://www.reddit.com/r/debian/comments/3k3fzm/bad_battery_...
Is a general overview. Intel graphics cards almost never enter the lowest idle state in Linux, last time I checked.
Is a general overview. Intel graphics cards almost never enter the lowest idle state in Linux, last time I checked.
This is a good start http://linrunner.de/en/tlp/docs/tlp-faq.html Depending on your HW/distro/DE, you might want to start playing around with powertop --calibrate and TLP. Highly suggest switching to a lightweight DE like i3.
I nearly doubled my battery life on linux by zooming on facebook until the chat bar on the right hand side disappeared. Didn't even need to close the facebook tab, just that bar was keeping the CPUs running hot. That's been effective enough for me not to bother with decent trace tools just yet.
You can close the chat bar. Problem solved?
I do use the chat though, and every time you click on the chat it brings back the sidebar and requires clicking a tiny icon and a menu option to get rid of it again.
Little-known tip (I think): messenger.com offers a web UI for Facebook chat similar to their iOS/Android apps, also ad-free and significantly cleaner than the actual Facebook UI. No idea whether it's actually better on power consumption though.
I didn't make a real trace, but was impressed when I saw the amount of CPU was being wasted for the the three cloud drives that I had: Microsoft OneDrive, DropBox and Google Drive. They all offer some free extra space when you login from a new machine and I accepted all of them. When I disabled them all my machine were much more responsive.
You'd be amazed at the amount of disk IO wasted by these programs, then.
Can somebody tell the Dropbox developers that right after boot is the exact wrong time to kill disk performance with a massive number of very random, very short reads? Jesus. People want to use their newly booted PC, not wait for Dropbox to realize nothing has changed after all while it chokes the browser being started.
I figure they don't notice because they have two PCIE 512GB SSD disks in a raid0 in their dev boxes. They need to test this stuff with spinning rust.
Can somebody tell the Dropbox developers that right after boot is the exact wrong time to kill disk performance with a massive number of very random, very short reads? Jesus. People want to use their newly booted PC, not wait for Dropbox to realize nothing has changed after all while it chokes the browser being started.
I figure they don't notice because they have two PCIE 512GB SSD disks in a raid0 in their dev boxes. They need to test this stuff with spinning rust.
I'm a developer for a large organization and every year or two I snag a laptop on the way out of the bottom of the replacement cycle. When I have it out people sometimes come by and are shocked, "You're a developer, what are you doing with that thing? It must be the oldest laptop in the whole agency!"
And I tell them, "Exactly. If I make my app run well on this laptop, I know for sure it will run acceptably on every machine here."
And I tell them, "Exactly. If I make my app run well on this laptop, I know for sure it will run acceptably on every machine here."
A company I used to work for had a slow DSL line, with a ~7 year old pc, that they'd use to test their web-apps. That way, if it was responsive on that, then it'd be responsive on the customer's pc. I wish more companies tried this, instead of pushing the limit of what their expensive work-provided desktops could do.
Facebook has been experimenting with "2G Tuesdays", providing an option for developers to test using the site with slow / laggy internet connections:
http://www.theverge.com/2015/10/28/9625062/facebook-2g-tuesd...
http://www.theverge.com/2015/10/28/9625062/facebook-2g-tuesd...
This guy has a good write up on using netem to impair a connection to simulate a wan connection.
Pretty handy for testing. I've used it to simulate a bad uplink in between a dslam and bras.
https://www.excentis.com/blog/use-linux-traffic-control-impa...
Pretty handy for testing. I've used it to simulate a bad uplink in between a dslam and bras.
https://www.excentis.com/blog/use-linux-traffic-control-impa...
I was going to recommend traffic manipulation and traffic shaping with netem and tc. I set this up at my last employer in the lab for use with our networked IP radios and such. Stimulating poor network conditions has been a mainstay in my testing ever since, even now that I work on web apps and distributed services.
Good advice. It's a shame because it is quite possible to make those programs power efficient. Sloppiness.
For this reason on my MBA I've uninstalled Google Drive and now i only use Dropbox on demand, as in I start it every now and then to sync the files and then make it quit.
As an aside, because I'm genuinely curious, can anyone explain the modern English trend of adding "age" suffix to some words? E.g. Wastage, Usage.
The title of this post would read just as well as "Power Waste on an Idle Laptop".
I also see "Usage" quite a lot on GitHub Readme pages, where I think "Use" would suffice.
Many words seem to be shortened for common use. E.g. Photograph to photo.
Why extend the length of other words?
The title of this post would read just as well as "Power Waste on an Idle Laptop".
I also see "Usage" quite a lot on GitHub Readme pages, where I think "Use" would suffice.
Many words seem to be shortened for common use. E.g. Photograph to photo.
Why extend the length of other words?
https://en.wiktionary.org/wiki/-age has some information on the subject. Seems the convention was created to turn nouns into verbs?
Thanks.
Of the six potential uses, I think this one is most relevant:
"Forming nouns indicating a process, action or result. E.g. blockage, slippage, shrinkage"
Yet in this case the extension to "wastage" still feels somehow redundant. For example, I wouldn't say "Household wastage in modern society".
Of the six potential uses, I think this one is most relevant:
"Forming nouns indicating a process, action or result. E.g. blockage, slippage, shrinkage"
Yet in this case the extension to "wastage" still feels somehow redundant. For example, I wouldn't say "Household wastage in modern society".
I would use "waste" to refer to the physical result, a bunch of trash or whatever. "Wastage" to me is the act, the production of waste.
The meaning are subtly different. I think I used it correctly, but I could well be wrong.
http://www.ourcivilisation.com/smartboard/shop/gowerse/abc/w...
http://www.ourcivilisation.com/smartboard/shop/gowerse/abc/w...
Genuinely wasn't meant to be a pointed criticism. I was curious to learn more about the use, which I just found different to what I'm used to.
I guess in this case I would read "wastage" as the reduction of available power over time. That is, the power was wasting away. Rather than the "waste" of power (frivolous use) by too many CPU cycles.
Anyway, English, wonderful language.....
I guess in this case I would read "wastage" as the reduction of available power over time. That is, the power was wasting away. Rather than the "waste" of power (frivolous use) by too many CPU cycles.
Anyway, English, wonderful language.....
> I also see "Usage" quite a lot on GitHub Readme pages, where I think "Use" would suffice.
Traditional Unix 'man(1)' pages are against you.
(And those were by the famously concise /usr, /bin and 'creat()' guys, though that last one was later regretted in a moment of weakness ;-)
Traditional Unix 'man(1)' pages are against you.
(And those were by the famously concise /usr, /bin and 'creat()' guys, though that last one was later regretted in a moment of weakness ;-)
You might like this app which highlights noise :) http://www.hemingwayapp.com/
"I have a special set of skills and if you violate these rules then I will hunt down your process and kill it."
Great writing
It's a quote from 96 hours:
"Bryan: [...] But what I do have are a very particular set of skills, skills I have acquired over a very long career. Skills that make me a nightmare for people like you. If you let my daughter go now, that'll be the end of it. I will not look for you, I will not pursue you. But if you don't, I will look for you, I will find you, and I will kill you."
Source: http://www.imdb.com/title/tt0936501/quotes
"Bryan: [...] But what I do have are a very particular set of skills, skills I have acquired over a very long career. Skills that make me a nightmare for people like you. If you let my daughter go now, that'll be the end of it. I will not look for you, I will not pursue you. But if you don't, I will look for you, I will find you, and I will kill you."
Source: http://www.imdb.com/title/tt0936501/quotes
Typo? It's from Taken.
Looks like you are both correct: https://de.wikipedia.org/wiki/96_Hours
A full list of foreign titles for "Taken" :
http://www.imdb.com/title/tt0936501/releaseinfo#akas
The worst localized title I know is "Die Hard: With a Vengeance", mysterious called (literally) "Die Hard - Mega Hard" in Denmark. Schwarzenegger's "Red Heat" is (translated) "A Russian cleans up Chicago".
http://www.imdb.com/title/tt0936501/releaseinfo#akas
The worst localized title I know is "Die Hard: With a Vengeance", mysterious called (literally) "Die Hard - Mega Hard" in Denmark. Schwarzenegger's "Red Heat" is (translated) "A Russian cleans up Chicago".
or "Die Hard" (literally) "die slow"
How does that link prove anything?
The first four words on that page are "96 Hours (Originaltitel: Taken)".
I don't speak any german, but I have a pretty good idea of what that means.
I don't speak any german, but I have a pretty good idea of what that means.
> "96 Hours (Originaltitel: Taken)"
That's what I was trying to evoke. I forgot to look up the actual quote. I think I'll update now to map the original better.
If you really can’t figure out how to avoid polling then be smart about it. Waking up every second may seem very conservative, but if every long running program does it then your CPU may get woken up dozens of times per second.
My understanding was that this shouldn't be true since Windows 7 (and on Mac, since Mavericks): https://en.wikipedia.org/wiki/Timer_coalescing
My understanding was that this shouldn't be true since Windows 7 (and on Mac, since Mavericks): https://en.wikipedia.org/wiki/Timer_coalescing
The rules on timer coalescing are complex and they depend on the details of the timers. So, the timers may get coalesced, but it's hardly guaranteed, especially if the different wakeup frequencies are slightly different.
I suspect very few programs are using SetCoalescableTimer, but I'll add that as a suggestion.
I suspect very few programs are using SetCoalescableTimer, but I'll add that as a suggestion.
A slightly easier option is "powercfg -energy" - does a 1 minute sample and spits out a little html report.
Also includes some info about driver/firmware limitations, wake up sources, supported power states etc.
Also includes some info about driver/firmware limitations, wake up sources, supported power states etc.
Don't forget to disable Windows Defender which does lots of realtime scanning and hogs CPU resources and disk IO. A complete piece of trash that automatically deletes false positives. Never have I been so disappointed with Windows 10 than after upgrading and seeing this thing enabling itself and running.
(To the downvoters: I would love to hear feedback about why I'm mistaken here. Windows 7 didn't need such an authoritarian defender (auto-deleting things, scanning, etc.) and it felt just as safe)
(To the downvoters: I would love to hear feedback about why I'm mistaken here. Windows 7 didn't need such an authoritarian defender (auto-deleting things, scanning, etc.) and it felt just as safe)
I see Defender as a symptom - as it monitors the files, it only checks files that some other process opens. Go solve a problem of second process regularly accessing files on idle PC.
I hope that you are correct. That was also my assumption but I have not validated it.
If you're on a Mac and using OSX, I highly suggest checking out Turbo Boost switcher https://github.com/rugarciap/Turbo-Boost-Switcher It's given me at least an hour more of battery life on my aging Macbook Pro 13 (2011). Another handy tool on OSX is CoconutBattery which is basically the closest I've found to PowerTop for monitoring power usage (I know ActivityMonitor somewhat shows power usage BUT it makes my fans & CPU spin like crazy when it's gathering info!)
Try "powermetrics" on the command line.
I can just imagine a sql server team meeting where they discuss sql server's effect on laptop battery life. Given sql server's intended environment, I almost wonder if its activity is intentional.
Power consumption is a concern even in data centers, but yeah, the power cost of this inefficiency is probably inconsequential in situations where sqlservr is actually being used.
But, VS installed and started sqlservr on millions of developer machines so they should have paid some attention to this issue. Super sloppy.
But, VS installed and started sqlservr on millions of developer machines so they should have paid some attention to this issue. Super sloppy.
it's also installed by millions of other applications - a sony laptop I had once shipped with some "music management" app installed by default that used it.
> Super sloppy.
You don't need to install SQL Server Express, just pay a bit more attention to what you're installing.
You don't need to install SQL Server Express, just pay a bit more attention to what you're installing.
What if I need it occasionally? Should I stop and start the server process as needed?
If so, why? Why shouldn't it just behave reasonably? Computers should be our slaves.
If so, why? Why shouldn't it just behave reasonably? Computers should be our slaves.
So true, if only more users realized this. I for one really appreciate your work this.
Users don't understand that computer resources like CPU time and battery level are really their property. It is an awful like paying a hidden poor quality tax.
It is not unreasonable to expect software to not waste CPU and battery time.
Users don't understand that computer resources like CPU time and battery level are really their property. It is an awful like paying a hidden poor quality tax.
It is not unreasonable to expect software to not waste CPU and battery time.
Windows Longhorn (Vista before the development reboot) actually shipped with SQL Server Express for WinFS. Though dotNet based shell and SQL Server Express based WinFS was too slow and consumed too much CPU resources.
https://en.wikipedia.org/wiki/Development_of_Windows_Vista and https://en.wikipedia.org/wiki/WinFS
https://en.wikipedia.org/wiki/Development_of_Windows_Vista and https://en.wikipedia.org/wiki/WinFS
WinFS was too slow and consumed too much CPU resources.
I'm genuinely curious what your source is for this. From the following uncited text on Wikipedia?
"An early revision of WinFS was also included, but very little in the way of a user interface was included, and as such it appeared to early testers to be nothing more than a service that consumed large amounts of memory and processor time."
Or do you have another source?
WinFS betas were released post-Longhorn as well.
I'm genuinely curious what your source is for this. From the following uncited text on Wikipedia?
"An early revision of WinFS was also included, but very little in the way of a user interface was included, and as such it appeared to early testers to be nothing more than a service that consumed large amounts of memory and processor time."
Or do you have another source?
WinFS betas were released post-Longhorn as well.
I tested it back then. And WinFS beta2 also on WinXP. It was really slow.
Not to mention SQL Slammer. I read that MSDE 2000 SP3 was not released until the day after it spread on the Internet.
Well, it's Express. Five years ago, when most development happened on a desktop, I'd agree. These days most developers have laptops. I guess it's time for them to revisit their Express config.
Also interesting is the default 'Balanced' power-saving settings for Windows Server 2008.
http://serverfault.com/questions/94212/does-cpu-power-manage...
http://serverfault.com/questions/94212/does-cpu-power-manage...
I can imagine many valid use cases for an RDMS waking up regularly, and a laptop really isn't the environment it was originally developed for.
The really questionable thing is automatically installing it along with Visual Studio.
The really questionable thing is automatically installing it along with Visual Studio.
Waking up every minute is fine. Spending 1.5 s of CPU time doing nothing... I think I could improve on that. That's enough CPU time to drag down overall performance slightly when the machine is not idle.
I would have liked to see bit more discussion/analysis on CPU power states, wakeups and frequency scaling. My understanding CPU usage might not be always perfect proxy for energy usage.
Yeah, I thought about that, but I wasn't sure I could say anything authoritatively enough beyond "CPU consumption wastes power, and so does waking up". Apple's energy monitor seems to use that for its model so I guess it's not too bad.
I wonder if anyone will do an analysis like this for Mac
On (recent) Macs, they have the Energy Impact numbers on the Activity Monitor. It can give a metric on which applications are taking up the most energy. However it doesn't show many of the system processes...
For those interested in the way Energy Impact is computed: https://blog.mozilla.org/nnethercote/2015/08/26/what-does-th...
In 10.9 it was a simple function of on-CPU time and wakeups with each wakeup counted as 500µs of CPU time, in 10.10 a bunch of new counters were added (with machine-specific conversions to CPU time estimates) variables were added to the mix: whether the process was in "background" QoS, the number of disk read/writes, GPU usage and network activity (in packets#)
In 10.9 it was a simple function of on-CPU time and wakeups with each wakeup counted as 500µs of CPU time, in 10.10 a bunch of new counters were added (with machine-specific conversions to CPU time estimates) variables were added to the mix: whether the process was in "background" QoS, the number of disk read/writes, GPU usage and network activity (in packets#)
The menu of the battery status indicator also shows a summary of this, if there are applications that are using lots of power (see https://support.apple.com/en-us/HT202776)
View Menu -> All Processes.
It's only showing you Applications from the last 8 hours by default.
It's only showing you Applications from the last 8 hours by default.
Bud(1)