Is Docker ready for production?(t37.net)
t37.net
Is Docker ready for production?
https://t37.net/is-docker-ready-for-production-feedbacks-of-a-2-weeks-hands-on.html?
15 comments
Thank you! I was sceptical of Docker for a while just based on a bad gut feeling, but now that you've shown a few oft the rough spots i think i might devote some time into it.
What you wrote:
Thank you! I was sceptical of Docker for a while just based on a bad gut feeling, but now that you've shown a few oft the rough spots i think i might devote some time into it.
What I read: Thank you! I've been looking for an excuse not to like docker for a while and this gives me great ammunition for my argument against it.
What I read: Thank you! I've been looking for an excuse not to like docker for a while and this gives me great ammunition for my argument against it.
Reading comprehension question (not a native speaker):
I read the GP as 'I was skeptical, but looking at the list of rough points in the article might make me to give it a try myself' - as a kind of 'well, if _those_ are the bad parts it might actually be interesting after all'.
Failure on my side?
I read the GP as 'I was skeptical, but looking at the list of rough points in the article might make me to give it a try myself' - as a kind of 'well, if _those_ are the bad parts it might actually be interesting after all'.
Failure on my side?
Thats exactly what i meant. I'm wary of things that people shout from the rooftop about, so some criticism is necessary to evaluate it better. If those things are the main problems, I think it might worth my time.
I am a native speaker, and this is also how i read it. I don't see a way to parse "i think i might devote some time into it" that makes this a negative comment.
Honestly, if that is what you took from it, you should read the rest of the comments here. Much of this article didn't make much sense.
Has anyone come up with a way to speed up the "bundle install" step in a Docker build? The smallest change will cause this step to completely rerun, which takes a long time for a Ruby application with lots of gem dependencies.
One approach might be to base the final Docker image on another Docker image, which has a snapshot of all Rubygem dependencies at a certain point. In the depending image, the 'bundle install' will then do an incremental update and the Docker build will go a lot faster.
But I was wondering how other people are solving this?
One approach might be to base the final Docker image on another Docker image, which has a snapshot of all Rubygem dependencies at a certain point. In the depending image, the 'bundle install' will then do an incremental update and the Docker build will go a lot faster.
But I was wondering how other people are solving this?
I found this article to be useful; the author describes how he makes sure his "bundle install" result is cached until the Gemfile.lock changes.
http://ilikestuffblog.com/2014/01/06/how-to-skip-bundle-inst...
http://ilikestuffblog.com/2014/01/06/how-to-skip-bundle-inst...
If you add the Gemfile and Gemfile.lock to the image before you add all the application files you can cache that step IIRC, then only if that step changes will bundle install run, so long as it's placed after that step.
I usually structure the Dockerfile to make the installation step cacheable, like so:
# This only re-runs the slow installation when requirements.txt changes
ADD requirements.txt /app/requirements.txt
RUN pip install -r /app/requirements.txt
# This re-runs every time you change any file, but is very fast
ADD . /app/I do "bundle install --standalone" in a separate Docker image whenever I update dependencies, and don't install/run bundler at all in the deployment image.
A typical large Ruby app ends up dragging in tons of build dependencies that does not need to be in the final image to be able to do things like compile extensions etc.
A typical large Ruby app ends up dragging in tons of build dependencies that does not need to be in the final image to be able to do things like compile extensions etc.
Put the things that are going to change as the last step; use very few steps (eg dont copy files one by one) and let Docker cache the results.
We use WhaleWare as a templating tool: https://github.com/l3nz/whaleware and it works great (or well enough)
Makes sense to have two docker repositories (images).
In one you install deps, and in the other, which relies on the first, you install your app. If you change your deps, then you rebuild the first.
I'm not a Ruby dev, but this seems like it should be quite simple?
In one you install deps, and in the other, which relies on the first, you install your app. If you change your deps, then you rebuild the first.
I'm not a Ruby dev, but this seems like it should be quite simple?
You can achieve that by letting the caching take care of it for you, there's no need for two images there.
I think OP wants to not have to reinstall every dependency again when they update just one. For that I think you'd have to use multiple Gemfiles, one for slow things that rarely change and the other for anything else new.
I think OP wants to not have to reinstall every dependency again when they update just one. For that I think you'd have to use multiple Gemfiles, one for slow things that rarely change and the other for anything else new.
What i've done is just mount the rails app in a volume, so it's not part of the docker image at all.
This means I can run multiple rails apps using the same image just by changing what volume to mount
This means I can run multiple rails apps using the same image just by changing what volume to mount
It's worth noting that this is also the approach that e.g. the standard nginx image takes, so if you run nginx in front of your Rails app, you can bring up nginx with a mount of the same volume.
I still prefer to deploy my Ruby apps as part of any image, though. Of course you can combine the two: Build an image whose sole purpose is to package your app and export it as a volume for use by pre-made Rails/Nginx containers.
I still prefer to deploy my Ruby apps as part of any image, though. Of course you can combine the two: Build an image whose sole purpose is to package your app and export it as a volume for use by pre-made Rails/Nginx containers.
I have a few docker containers I use as a testing environment. I ended up mounting gems from the host. They where mounted from a /tmp dir so docker would not pollute the gems on the host.
> If I want to keep my containers separated, I can’t have them communicate with a UNIX socket, unless I create a shared volume. Once again it’s a no go for me.
What do you mean by "shared volume" -- docker's "-v" to bind-mount the socket into the container? How else would you like to expose the socket to the container? Why is it a no go?
What do you mean by "shared volume" -- docker's "-v" to bind-mount the socket into the container? How else would you like to expose the socket to the container? Why is it a no go?
I don't get that one either. It seems like he objects to it on the basis that it reduces isolation, but so will exposing ports via TCP/IP, so I don't get what he thinks he gains by avoiding volumes in situations like that. Especially since you can easily enough share just the socket file and nothing else.
Personally I think it shows that this is a "first look" at Docker. Much of it is much better than what the post indicates.
> The final image is 570MB big. I could not shrink it more unless I remove the whole Python and Perl stack. Since both are necessary for many system dependencies, starting with apt-get, this was not possible. I still need a way I can improve or upgrade my container.
?!? The article starts by pointing out they use immutable servers and blue/green deployment. In that context, you will not improve or upgrade the container: You build a new one. And if you want to cut build dependencies from the final container: Do the build in one container, install the build-artefacts to a volume, and use the contents of that volume to build a container without the build dependencies.
It'd be great to get "built in" support for this, but it's not hard to do.
> There’s no easy way logging with Docker.
The standard way of logging with Docker is to log to standard out, which gets captures and is accessible via "docker logs". If he'd not dismissed systemd out of hand, he'd also easily have gotten it fed into journald, with the option of having it relayed to a remote or local syslog as per his preferences.
> Let’s put it this way: as a way of provisioning a container, Dockerfile is a joke.
We don't need more complex provisioning tools. We have plenty of provisioning tools. Ultimately Dockerfiles needs to be able to specify what should be copied into the image. Everything else you can do with your standard/preferred build tools. There's no reason for Dockerfiles to try to become yet another fully featured provisioning tool.
> Forget your classic monitoring (unless you want to pull your hair with network bridges). Everything you’ll be able to monitor within the container are ports. That because you run the old school nrpe inside your host, so you won’t be able to check you actually have 8 workers running inside your container.
This is just flat out wrong. Anything running on the host can see the processes running in the container. With the right cgroup manipulation (via nsenter etc.) it can also see the mounted volumes or network space of a container, and so you can still monitor whatever you like.
> Making your application Docker compliant requires you to rethink the way it works.
Making your application take advantage of Docker, rather than treating Docker containers as sort-of VM's with less isolation requires you to rething the way it works. It's not something you need to do in one go - you can "break apart" a larger app environment piece by piece.
> The the tag nightmare begins. If I update my application and add new deps, I’ll have to update container #2. Unfortunately, how will I know I have to do that?
Uh. How does he know he has to update the machine images he deploys his applications to today? Personally I use make - tracking build dependencies is what it is for.
> The final image is 570MB big. I could not shrink it more unless I remove the whole Python and Perl stack. Since both are necessary for many system dependencies, starting with apt-get, this was not possible. I still need a way I can improve or upgrade my container.
?!? The article starts by pointing out they use immutable servers and blue/green deployment. In that context, you will not improve or upgrade the container: You build a new one. And if you want to cut build dependencies from the final container: Do the build in one container, install the build-artefacts to a volume, and use the contents of that volume to build a container without the build dependencies.
It'd be great to get "built in" support for this, but it's not hard to do.
> There’s no easy way logging with Docker.
The standard way of logging with Docker is to log to standard out, which gets captures and is accessible via "docker logs". If he'd not dismissed systemd out of hand, he'd also easily have gotten it fed into journald, with the option of having it relayed to a remote or local syslog as per his preferences.
> Let’s put it this way: as a way of provisioning a container, Dockerfile is a joke.
We don't need more complex provisioning tools. We have plenty of provisioning tools. Ultimately Dockerfiles needs to be able to specify what should be copied into the image. Everything else you can do with your standard/preferred build tools. There's no reason for Dockerfiles to try to become yet another fully featured provisioning tool.
> Forget your classic monitoring (unless you want to pull your hair with network bridges). Everything you’ll be able to monitor within the container are ports. That because you run the old school nrpe inside your host, so you won’t be able to check you actually have 8 workers running inside your container.
This is just flat out wrong. Anything running on the host can see the processes running in the container. With the right cgroup manipulation (via nsenter etc.) it can also see the mounted volumes or network space of a container, and so you can still monitor whatever you like.
> Making your application Docker compliant requires you to rethink the way it works.
Making your application take advantage of Docker, rather than treating Docker containers as sort-of VM's with less isolation requires you to rething the way it works. It's not something you need to do in one go - you can "break apart" a larger app environment piece by piece.
> The the tag nightmare begins. If I update my application and add new deps, I’ll have to update container #2. Unfortunately, how will I know I have to do that?
Uh. How does he know he has to update the machine images he deploys his applications to today? Personally I use make - tracking build dependencies is what it is for.
The main point he makes is valid however,
> Porting your application to Docker increases complexity. Really.
I think the main problem of Docker is that it's sold as an 'easy solution' by many bloggers who only deal with it superficially and then move on to the next big thing. There are a lot of gotchas with docker containers and the creation of clean docker images that are not immediately clear when you start out. A lot of your standard Linux know-how is not applicable.
edit: Also, there are obvious security issues that are not immediately clear to most beginners, most certainly not from the tutorials.
One of my favorites: If you provision your database container with environment variables to create a dba user, and then link your db container to your app container, voilà, your app container will now most certainly have the dba login and password inside its environment variables: https://github.com/docker/docker/issues/5169
> Porting your application to Docker increases complexity. Really.
I think the main problem of Docker is that it's sold as an 'easy solution' by many bloggers who only deal with it superficially and then move on to the next big thing. There are a lot of gotchas with docker containers and the creation of clean docker images that are not immediately clear when you start out. A lot of your standard Linux know-how is not applicable.
edit: Also, there are obvious security issues that are not immediately clear to most beginners, most certainly not from the tutorials.
One of my favorites: If you provision your database container with environment variables to create a dba user, and then link your db container to your app container, voilà, your app container will now most certainly have the dba login and password inside its environment variables: https://github.com/docker/docker/issues/5169
The reason people call it easy is because it makes a lot of things that are traditionally hard very, very easy. One need only have written Chef scripts for any considerable amount of time to appreciate just how much easier it is to write a Dockerfile. And the things that CoreOS/fleet, Kubernetes and (hopefully) EC2 Container Service do aren't just difficult to do without something like Docker, they're basically impossible. And as much as I like our DevOps teams, the fact that Docker has basically made meetings with them a thing of the past is a truly wonderful thing.
That's why it's so frustrating to see developers making superficial forays into Docker and then declare it to be too complex. Yes, the simple and largely irrelevant stuff does get a bit more complex and you have to do some learning (and re-learning) before you use it for a production workload. But that's a trade off that a lot of us are willing to make to make the crazy-hard stuff significantly easier.
We're developers. Our tools should not be optimized for first use.
That's why it's so frustrating to see developers making superficial forays into Docker and then declare it to be too complex. Yes, the simple and largely irrelevant stuff does get a bit more complex and you have to do some learning (and re-learning) before you use it for a production workload. But that's a trade off that a lot of us are willing to make to make the crazy-hard stuff significantly easier.
We're developers. Our tools should not be optimized for first use.
"That's why it's so frustrating to see developers making superficial forays into Docker and then declare it to be too complex. "
That goes both ways. It's equally frustrating to see developers making superficial forays into it and declaring it to be the magic bullet that makes everything simple.
The basic fact is that building and deploying complex software, managing dependencies, handling discovery - these are all complex things. There is no solution that makes it simple because it is inherently not a simple process.
Instead, we can only shuffle the complexity to places we're more comfortable in managing. For some use cases that's a dockerfile. For others, it's chef cookbooks [or other CM solution]. For yet others, it's both.
That goes both ways. It's equally frustrating to see developers making superficial forays into it and declaring it to be the magic bullet that makes everything simple.
The basic fact is that building and deploying complex software, managing dependencies, handling discovery - these are all complex things. There is no solution that makes it simple because it is inherently not a simple process.
Instead, we can only shuffle the complexity to places we're more comfortable in managing. For some use cases that's a dockerfile. For others, it's chef cookbooks [or other CM solution]. For yet others, it's both.
I think sometimes people also confuse "easiness" and "managed complexity". Docker makes it easy to work on a single container/image at a time, so you don't have to simultaneously grasp the rest of a complex system.
Complexity management is not a Docker-specific thing, but Docker makes it easier than before, and standardizes how it's done. I think that's the main added value.
Complexity management is not a Docker-specific thing, but Docker makes it easier than before, and standardizes how it's done. I think that's the main added value.
You obviously know a lot more about Docker than I do, but I thought I'd add a couple of comments to your great list.
For size, it appears the OP started on his static compilation quest basing his image on Ubuntu. Wheezy is the standard base image in the Docker world for a reason -- it's significantly smaller. More and more images are using busybox based images, but I wouldn't want to try that with Rails + ImageMagick.
As for logging, I'd like to point out logspout: https://github.com/progrium/logspout
For size, it appears the OP started on his static compilation quest basing his image on Ubuntu. Wheezy is the standard base image in the Docker world for a reason -- it's significantly smaller. More and more images are using busybox based images, but I wouldn't want to try that with Rails + ImageMagick.
As for logging, I'd like to point out logspout: https://github.com/progrium/logspout
Absolutely agree re: Wheezy (Debian in general). Ubuntu is great when you want the kitchen sink; not so great if you want small.
His comments on logging are spot on. It's the only part of the post that I can agree on. You can get process monitoring as long as your tools are cgroup aware. Network monitoring is not so easy. This has been pointed out on the docker blog in the past.
Getting your logs out of docker is a PITA, though. Your best bet is to use syslog and configure each application to send their logs to a syslog server. It's a consistent widely supported way of shipping your logs around. Relying on stdout logs isn't always enough. Many applications do understand syslog out of the box but do not necessarily send important messages to standard out. Dockers management of stdout logs shouldn't be relied on at this stage.
Logspout does look interesting and I wish I knew about this a few months ago but see my above comment on stdout.
Getting your logs out of docker is a PITA, though. Your best bet is to use syslog and configure each application to send their logs to a syslog server. It's a consistent widely supported way of shipping your logs around. Relying on stdout logs isn't always enough. Many applications do understand syslog out of the box but do not necessarily send important messages to standard out. Dockers management of stdout logs shouldn't be relied on at this stage.
Logspout does look interesting and I wish I knew about this a few months ago but see my above comment on stdout.
I wish they'd just provide a way to route the syslog call to the host.
>"We don't need more complex provisioning tools. We have plenty of provisioning tools."
Absolutely.
Thankfully, the Docker team seems in agreement with this based statements about avoiding making Dockerfiles "too clever" and the response to various proposals.
As you point out, most of the "issues" here are really misconceptions.
I expect it's a tough balance for any new(er) project. Maximizing exposure and adoption, but avoiding negative perceptions from being applied in ways aren't optimal.
Absolutely.
Thankfully, the Docker team seems in agreement with this based statements about avoiding making Dockerfiles "too clever" and the response to various proposals.
As you point out, most of the "issues" here are really misconceptions.
I expect it's a tough balance for any new(er) project. Maximizing exposure and adoption, but avoiding negative perceptions from being applied in ways aren't optimal.
Dockerfiles are deliberately dumb to let other tools take over as necessary, is my understanding.
My experience (over the last year) is that they're so limited as to be pretty useless. They don't even do what they're advertised to do, ie give you a reliable way to reproduce a build, and they're inflexible for my idea of real-world work with Docker. Where they're good is in giving everyone a point of reference.
I had a discussion with the maintainers last year about this:
https://groups.google.com/forum/#!topic/docker-user/3pcVXU4h...
I have a problem with most CM tools in that they're for moving target systems, not immutable ones. Ansible is the closest, but our experience has been that development on it is slow relative to the tool we use (see below). It's saved us a ton of money.
I blog on this and similar topics here:
http://zwischenzugs.wordpress.com/
The "tool for building and maintaining complex Docker deployments" is here:
http://ianmiell.github.io/shutit/ https://github.com/ianmiell/shutit
I also talk about this here:
https://www.youtube.com/watch?v=zVUPmmUU3yY
My experience (over the last year) is that they're so limited as to be pretty useless. They don't even do what they're advertised to do, ie give you a reliable way to reproduce a build, and they're inflexible for my idea of real-world work with Docker. Where they're good is in giving everyone a point of reference.
I had a discussion with the maintainers last year about this:
https://groups.google.com/forum/#!topic/docker-user/3pcVXU4h...
I have a problem with most CM tools in that they're for moving target systems, not immutable ones. Ansible is the closest, but our experience has been that development on it is slow relative to the tool we use (see below). It's saved us a ton of money.
I blog on this and similar topics here:
http://zwischenzugs.wordpress.com/
The "tool for building and maintaining complex Docker deployments" is here:
http://ianmiell.github.io/shutit/ https://github.com/ianmiell/shutit
I also talk about this here:
https://www.youtube.com/watch?v=zVUPmmUU3yY
>"They don't even do what they're advertised to do, ie give you a reliable way to reproduce a build, and they're inflexible for my idea of real-world work with Docker."
Not exactly, as the thread you link points out you can reference an image ID in FROM rather than the name:tag which has potential to change silently.
It's the equivalent of using a package manager against a repo you don't own without pinning - expect problems.
This can be mitigated by FROM'ing via ID or avoided entirely by running your registry where tags are reliable.
Admittedly, these things are not necessarily obvious, but I think it's a bit disingenuous to paint Dockerfiles as worthless or broken.
That said, ShutIt looks very cool and seems to address exactly some of my concerns / desires about working with Docker.
I just don't agree with framing it in opposition to and at the expense of what exists.
There's value in a container description that is fully self-contained, transferable and 'dumb' enough to be transparent.
Not exactly, as the thread you link points out you can reference an image ID in FROM rather than the name:tag which has potential to change silently.
It's the equivalent of using a package manager against a repo you don't own without pinning - expect problems.
This can be mitigated by FROM'ing via ID or avoided entirely by running your registry where tags are reliable.
Admittedly, these things are not necessarily obvious, but I think it's a bit disingenuous to paint Dockerfiles as worthless or broken.
That said, ShutIt looks very cool and seems to address exactly some of my concerns / desires about working with Docker.
I just don't agree with framing it in opposition to and at the expense of what exists.
There's value in a container description that is fully self-contained, transferable and 'dumb' enough to be transparent.
Hi, yes you're right - you can reference an image ID. However, as soon as you go to the network you're lost - any apt-get/yum update or install could break your system in surprising ways.
Having done _lots_ of builds lately I can vouch for that (see my blog for some examples).
In the end the image ID _is_ useful, but the dockerfile itself has limitations.
I agree with your last point as well - my evangelism comes from solving problems at my company in this way (which I know are not uncommon problems) rather than any belief that it beats others objectively.
Having done _lots_ of builds lately I can vouch for that (see my blog for some examples).
In the end the image ID _is_ useful, but the dockerfile itself has limitations.
I agree with your last point as well - my evangelism comes from solving problems at my company in this way (which I know are not uncommon problems) rather than any belief that it beats others objectively.
I would love to peek at some of your Dockerfiles if possible?
Tried building a piece of infrastructure with Docker quite some time ago and left when it just didn't click. I certainly did quite some mistakes (at that time I did try to stuff all the provisioning into the Dockerfile for example, which you agree is a bad idea?) and the official Dockerfiles were .. mixed in clarity and not quite useful as examples to me.
So, I would really love reading about how people provision and manage their Docker instances The Right Way.
Tried building a piece of infrastructure with Docker quite some time ago and left when it just didn't click. I certainly did quite some mistakes (at that time I did try to stuff all the provisioning into the Dockerfile for example, which you agree is a bad idea?) and the official Dockerfiles were .. mixed in clarity and not quite useful as examples to me.
So, I would really love reading about how people provision and manage their Docker instances The Right Way.
There are some examples in this article I wrote:
http://www.hokstad.com/docker/patterns
I'll be posting a more detailed walkthrough of my process for using Docker with Ruby soon, as well as some other experiences.
> (at that time I did try to stuff all the provisioning into the Dockerfile for example, which you agree is a bad idea?
It's not necessarily a big deal for everything. I you have a lot of stuff that have limited build dependencies beyond Debian's "build-essential" target, you might as well create a debian:wheezy image with "build-essential" installed and work from that to begin with.
The issue is that some types of apps, like any Ruby app that uses Bundler and has dependencies on stuff with native extensions, can drag in hundreds of MB of dependencies that are only needed during build, and the build is only necessary when adding dependencies. For those kinds of apps it just wastes time and bloats your images to do the builds in the same Dockerfiles that you deploy with. If you're deploying 4-5 images now on a server or two, that's no big deal. When you're deploying 500 containers, you start getting picky about anything that slows down the process...
For those situations, I'd typically put together a Dockerfile with all the basic dependencies, and then "inherit" from that once for a dev/build container with the build dependencies, but without an entrypoint (so I can easily start it into bash or have it run a build script, or whatever I want), and then secondly for the final container where the latter image just adds the build artefacts.
Ideally I'd want everything I deploy to just have the files that are needed. Pragmatically, the tools are not quite there yet. Not least, it's often a real pain to build apps statically (if it's even possible), and the known dependencies are too granular (e.g. dependency on a large package, with no documentation about precisely what in the package has to be present) and it will take a long time to build up a "catalog" of more minimal images and build processes.
I'll be posting a more detailed walkthrough of my process for using Docker with Ruby soon, as well as some other experiences.
> (at that time I did try to stuff all the provisioning into the Dockerfile for example, which you agree is a bad idea?
It's not necessarily a big deal for everything. I you have a lot of stuff that have limited build dependencies beyond Debian's "build-essential" target, you might as well create a debian:wheezy image with "build-essential" installed and work from that to begin with.
The issue is that some types of apps, like any Ruby app that uses Bundler and has dependencies on stuff with native extensions, can drag in hundreds of MB of dependencies that are only needed during build, and the build is only necessary when adding dependencies. For those kinds of apps it just wastes time and bloats your images to do the builds in the same Dockerfiles that you deploy with. If you're deploying 4-5 images now on a server or two, that's no big deal. When you're deploying 500 containers, you start getting picky about anything that slows down the process...
For those situations, I'd typically put together a Dockerfile with all the basic dependencies, and then "inherit" from that once for a dev/build container with the build dependencies, but without an entrypoint (so I can easily start it into bash or have it run a build script, or whatever I want), and then secondly for the final container where the latter image just adds the build artefacts.
Ideally I'd want everything I deploy to just have the files that are needed. Pragmatically, the tools are not quite there yet. Not least, it's often a real pain to build apps statically (if it's even possible), and the known dependencies are too granular (e.g. dependency on a large package, with no documentation about precisely what in the package has to be present) and it will take a long time to build up a "catalog" of more minimal images and build processes.
Seconded! I was able to set up a toy blogging system with Docker, but it's not something I'd feel comfortable using in a production environment yet. I'd really love to know more about how robust production environments are built with Docker.
>And if you want to cut build dependencies from the final container: Do the build in one container, install the build-artefacts to a volume, and use the contents of that volume to build a container without the build dependencies.
This is similar to what Netflix, one of the early big proponents of immutable servers, does. They build a deb package, then they create an AMI with that package installed.
http://techblog.netflix.com/2013/03/ami-creation-with-aminat...
This is similar to what Netflix, one of the early big proponents of immutable servers, does. They build a deb package, then they create an AMI with that package installed.
http://techblog.netflix.com/2013/03/ami-creation-with-aminat...
This has been submitted previously. Seems like a ? has been added to the end of the URL which mitigates this being flagged as a duplicate. See https://news.ycombinator.com/item?id=8408291
Adding a query parameter is the accepted way if you want to resubmit a link. It also seems to be generally accepted to resubmit if the original submission discussion did not bring a fruitful discussion. Articles sometimes drop off the homepage very fast even tough they're interesting for multiple reasons, for example if they're submitted at US night time or if some other, controversial topic dominates the day. I saw the original submission and I like the new submission here.
This is the third or fourth time this story has been posted (https://news.ycombinator.com/item?id=8527213) and the post was originally written on 09 September 2014.
Well, this time it gained traction, I gained insight from the discussion. I'm fine with that.
Alternatively if you don't Linux-dependent and don't mind much the fact that not everyone is writing blogposts about it, BSD’s jails is lightweight virtualisation mechanism that has been production-ready for decades. (And zfs pools and snapshots are yours too along with that.)
Jails are great. But - and apologies if i'm teaching my grandmother to suck eggs here - they're the equivalent of Linux's containers, as implemented in LXC or libcontainer or whatever.
Docker is a layer on top of that - it's what prepares the file contents of the jails and looks after them while they're running. I think Docker can even manage FreeBSD jails, although i'm not certain about that.
It's not the production-readiness of Linux containers that is in question here; they're fine, although nowhere near as mature as jails. The doubt is about docker, the layer on top. If you wanted to make a comparison to jails, it would be to whatever the equivalent of Docker is in the jail ecosystem. I'm not sure what that is; either there isn't one, or it's an ad-hoc pile of site-local shell scripts.
Docker is a layer on top of that - it's what prepares the file contents of the jails and looks after them while they're running. I think Docker can even manage FreeBSD jails, although i'm not certain about that.
It's not the production-readiness of Linux containers that is in question here; they're fine, although nowhere near as mature as jails. The doubt is about docker, the layer on top. If you wanted to make a comparison to jails, it would be to whatever the equivalent of Docker is in the jail ecosystem. I'm not sure what that is; either there isn't one, or it's an ad-hoc pile of site-local shell scripts.
I'm not sure what the benefits of Docker are over using Ansible or Salt to build and start your Jail. It can automate the entire process, and it's very repeatable.
Ah, now Docker and Ansible / Salt / legacy configuration management tools are also at slightly different places in the stack. Configuration management tools, as you say, give you a nice repeatable way of automatically building up a machine. Docker lets you take a machine you've built up and run lots of copies of it. I believe a typical way to use Docker is to have it run Ansible etc to build the contents of a container, and then use the result as an image.
I think the point of doing it that way rather than just running Ansible etc on all your containers is that it means you're running N copies of one master image, rather than running N images which you hope are the same because they've been configured the same way. This doesn't seem like a colossal win to me, but some people seem to like it.
Why it's docker that runs Ansible etc, rather than the other way round, i don't know. It's a bit like how rpmbuild runs the build tools that make the contents of RPMs, i suppose. But i really hate rpmbuild so i don't find that analogy very encouraging.
As something of an aside, i get the impression that Docker is most popular with people, or organisations, or people in organisations where for whatever reason developers don't have a lot of control over the configuration of the machines their software run on. That could be traditional inflexible siloed organisations, or small, flexible organisations which just don't have an existing investment in infrastructure automation or the resources to make one. In those situations, Docker gives developers a way to make control the environment around their software without having to configure machines. This strikes me as a workaround to a problem rather than a solution to one, though.
I think the point of doing it that way rather than just running Ansible etc on all your containers is that it means you're running N copies of one master image, rather than running N images which you hope are the same because they've been configured the same way. This doesn't seem like a colossal win to me, but some people seem to like it.
Why it's docker that runs Ansible etc, rather than the other way round, i don't know. It's a bit like how rpmbuild runs the build tools that make the contents of RPMs, i suppose. But i really hate rpmbuild so i don't find that analogy very encouraging.
As something of an aside, i get the impression that Docker is most popular with people, or organisations, or people in organisations where for whatever reason developers don't have a lot of control over the configuration of the machines their software run on. That could be traditional inflexible siloed organisations, or small, flexible organisations which just don't have an existing investment in infrastructure automation or the resources to make one. In those situations, Docker gives developers a way to make control the environment around their software without having to configure machines. This strikes me as a workaround to a problem rather than a solution to one, though.
But I can do that with jails. I can build a master jail and distribute launch a bunch of jails from it... or distribute it to other machines... extra easy if I use ZFS snapshots. Handle the distribution/deployment and maybe any extra configuration with your salt/ansible/whatever and you're fine.
What I see as a problem here for many people is that they don't want to do this all themselves and maybe docker offers conveniences out of the box. I get that. Someone needs to work on the jails tooling to make it more approachable so people aren't inventing the wheel.
What I see as a problem here for many people is that they don't want to do this all themselves and maybe docker offers conveniences out of the box. I get that. Someone needs to work on the jails tooling to make it more approachable so people aren't inventing the wheel.
Have you tried CBSD? Does it compete well against Docker? The documentation seems quite lacking, but then again, so is docker's at the moment too.
Two weeks? we have been running Docker in production for over one year and have thousands of separate instances. No big issues os far. All that is said is true, it's just a matter of weighting pro's and con's.
I would be really curious to see how you are actually managing these thousands of separate instances? Do you have some kind of a management GUI to do this? Are you managing them through command line? If so are you running into issues where managing these take up most of your time and adding more complexity into your environment? I honestly want to see a good example of how you manage your docker containers where you have thousands of containers instead of say 10.
Two weeks? we have been running Docker in production for over one year and have thousands of separate instances. No big issues os far.
All that is said is true (or at least points to an area of concern), it's just a matter of weighting pro's and con's.
What's the present best practice as far as defining an application as a set of multiple inter-linking containers? I know of at least Shipyard and Panamax, and don't especially care for either of them.
Are there others? Is anyone clearly winning in this space?
As it stands, it seems far easier to just create a monolithic container with a bunch of running processes and a supervisord than to break up the pieces and then have a more complicated deployment.
Are there others? Is anyone clearly winning in this space?
As it stands, it seems far easier to just create a monolithic container with a bunch of running processes and a supervisord than to break up the pieces and then have a more complicated deployment.
We are using fig. Just starting to get our feet wet with docker, so I don't know if its considered "best practice" though. It seems to meet our needs so far.
http://www.fig.sh/
http://www.fig.sh/
if you want a heroku / 12 factor app style setup, tryout deis.io
> The minimal Ubuntu 12.02 image is 627MB. Add your own application layer, and your container will most likely weight more than 1GB.
I've read that using Debian (or if possible Busybox) helps in this area. See http://container-solutions.com/2014/11/6-dockerfile-tips-off... and http://jonathan.bergknoff.com/journal/building-good-docker-i... for tips.
> Every time your application is updated, check the Gemfile md5 and see if it’s different from the latest build
Wouldn't you need to check Gemfile.lock? With optimistic/pessimistic version constraints you could get newer gems without updating the Gemfile.
I've read that using Debian (or if possible Busybox) helps in this area. See http://container-solutions.com/2014/11/6-dockerfile-tips-off... and http://jonathan.bergknoff.com/journal/building-good-docker-i... for tips.
> Every time your application is updated, check the Gemfile md5 and see if it’s different from the latest build
Wouldn't you need to check Gemfile.lock? With optimistic/pessimistic version constraints you could get newer gems without updating the Gemfile.
> Wouldn't you need to check Gemfile.lock?
Exactly. It should be Gemfile.lock that is checked, not Gemfile
Exactly. It should be Gemfile.lock that is checked, not Gemfile
This appears to be a good, honest and multi-faceted review against real world requirements. It is a shame so many replies are "if it works for me and I have n instances, you must be wrong" instead of truly substantive. The author is bringing up points of concern, not rubbishing the project. FWIW as frequently shared my own summary of the area exists at http://stani.sh/walter/pfcts/ and a general architectural response to the same sorts of concerns derived at http://stani.sh/walter/pfcts/original/
I was surprised to see complaints about building libsqlite3 and Image Magick, presenting them as tricky. It isn't is it? This is a Linux guy, right?
The complaint was specifically about building a fully static version, i think. I have no idea how to do that, but i imagine it's not as simple as ./configure && make.
Both sqlite and ImageMagick will build static versions of the libraries as default with ./configure && make.
My general impression of Docker is that for most of us, it adds complexity with very little upside. Only when you have an already complex orchestration does Docker help you reduce that complexity.
I'm expecting that to shift with both Docker and the ecosystem of tools and services around it maturing, to the point where in a few years time Docker may even be advantageous to the most simple setups.
I'm really excited about Docker, but personally I'm not expecting to have any use for it in production for another two years.
I'm expecting that to shift with both Docker and the ecosystem of tools and services around it maturing, to the point where in a few years time Docker may even be advantageous to the most simple setups.
I'm really excited about Docker, but personally I'm not expecting to have any use for it in production for another two years.
Checkout http://deis.io/ and follow the Heroku buildpack instructions to take some of the headache out of all the DevOps questions that Dockerfiles etc might pose if you are just a humble web developer. Deis run's on CoreOS which is an excellent base OS that requires you to use Docker. CoreOS upgrades automatically in the background too.
Deis is a fully opensource PaaS inspired by Heroku. You can dip your toe in the water by spinning up a Deis cluster and then just following the Heroku inspired/compatible workflow described in the Deis docs. When you are ready to experiment Deis let's you use Dockerfiles instead of a Heroku inspired workflow.
Once you have your Deis cluster up you might even want to sidestep it entirely and run Docker containers directly on your CoreOS cluster.
Deis can be used with Vagrant and VirtualBox and it can also deploy to multiple clouds (EC2, Rackspace, Digital Ocean, Bare Metal (e.g. Kimsufi should be possible http://bit.ly/1t2PPXB). I've been playing around with it and it looks great so far.
Deis is a fully opensource PaaS inspired by Heroku. You can dip your toe in the water by spinning up a Deis cluster and then just following the Heroku inspired/compatible workflow described in the Deis docs. When you are ready to experiment Deis let's you use Dockerfiles instead of a Heroku inspired workflow.
Once you have your Deis cluster up you might even want to sidestep it entirely and run Docker containers directly on your CoreOS cluster.
Deis can be used with Vagrant and VirtualBox and it can also deploy to multiple clouds (EC2, Rackspace, Digital Ocean, Bare Metal (e.g. Kimsufi should be possible http://bit.ly/1t2PPXB). I've been playing around with it and it looks great so far.
I keep looking at Deis for these reasons... but the getting started guides in the docs, eg for DigitalOcean, ask you to provision 3 nodes of at least 2gb. That's $60/month when I only need one small node to run a few basic websites
It seems a too heavyweight solution (Deis cluster has its own instances of PostgreSQL, Redis, a Docker image registry etc) for the 'humble web developer' scenario.
Plus it's a bit worrying to use Heroku buildpacks on something that's not Heroku... you're going to be relying on the Heroku docs and then having to filter out details that aren't relevant or incompatible
It seems a too heavyweight solution (Deis cluster has its own instances of PostgreSQL, Redis, a Docker image registry etc) for the 'humble web developer' scenario.
Plus it's a bit worrying to use Heroku buildpacks on something that's not Heroku... you're going to be relying on the Heroku docs and then having to filter out details that aren't relevant or incompatible
Deis maintainer here. We understand Deis can be a bit heavy for those who don't want a multi-node HA setup. For the 'humble web developer' we strongly recommend Dokku. In fact, we're now sponsoring that project: http://deis.io/deis-sponsors-dokku/
My coworker and I have been fighting with Docker for the last few weeks like the OP, so maybe HN can help us here. Right now we use Chef to provision the hosts and we run services normally. Now we're trying to introduce Docker into our test environment, so we don't need to replicate a multi-node database cluster out of machines. In the process, it seems like we're having to repeat most of our Chef recipes to create the config files, and put them in the appropriate locations to let Docker mount them as a shared volume.
Are we doing it wrong? Should everything be Docker and all of our Chef recipes should be written for Docker? Or is this right and just a natural pain of having both bare metal processes and Dockerized processes? Unlike the article, so far everything is 1 process or application per container, not a full OS.
Are we doing it wrong? Should everything be Docker and all of our Chef recipes should be written for Docker? Or is this right and just a natural pain of having both bare metal processes and Dockerized processes? Unlike the article, so far everything is 1 process or application per container, not a full OS.
The thing about Chef is that it tries to simplify the process of configuring and installing many applications that might run on a server.
Docker pretty much removes the the need for such complexity. Don't think of it as a provisioning tool, like chef. Don't think of it as a VM. Think of it as an isolated filesystem and process environment that eliminates the complexity of supporting multiple, disparate application stacks.
The storage for persistent storage with Docker is less compelling, because now you have shared resources between containers that should be isolated. That said, we run Cassandra clusters in Docker and have no trouble.
Also, If you want to re-use the work you've done with Chef, there are chef plugins for Docker which make it easy to provision Docker images with chef (solo, I think)
Docker pretty much removes the the need for such complexity. Don't think of it as a provisioning tool, like chef. Don't think of it as a VM. Think of it as an isolated filesystem and process environment that eliminates the complexity of supporting multiple, disparate application stacks.
The storage for persistent storage with Docker is less compelling, because now you have shared resources between containers that should be isolated. That said, we run Cassandra clusters in Docker and have no trouble.
Also, If you want to re-use the work you've done with Chef, there are chef plugins for Docker which make it easy to provision Docker images with chef (solo, I think)
I follow that I'm not provisioning a full node, and parts of Chef installations are definitely unneeded, but where I'm stuck is I still have a config file that I need to control.
In the case of Cassandra I'd have certain cassandra.yml tweaks I need to make, possibly different for beta/staging/prod, and docker-cassandra needs that config file. I also need to spawn the containers with the right setup, such that the right ports get exposed and shared volumes get mounted so the configs get read in. The spawning is a slightly different ops problem (do I want a homogenous cluster where I just spawn containers somewhere as needed, or do I want certain containers on certain machine types), but it seems like something that would fall in the domain of a provisioning tool.
Should I just be building the configs into the container and rebuild the container if they need to change? The isolation of the process seems at odds with my desire to have a semi-dynamic, centrally managed configuration.
I'm also considering that Chef itself is overkill to manage Docker containers and there are other tools more well suited to managing Docker-based infrastructure, but I'm not sure what they are.
In the case of Cassandra I'd have certain cassandra.yml tweaks I need to make, possibly different for beta/staging/prod, and docker-cassandra needs that config file. I also need to spawn the containers with the right setup, such that the right ports get exposed and shared volumes get mounted so the configs get read in. The spawning is a slightly different ops problem (do I want a homogenous cluster where I just spawn containers somewhere as needed, or do I want certain containers on certain machine types), but it seems like something that would fall in the domain of a provisioning tool.
Should I just be building the configs into the container and rebuild the container if they need to change? The isolation of the process seems at odds with my desire to have a semi-dynamic, centrally managed configuration.
I'm also considering that Chef itself is overkill to manage Docker containers and there are other tools more well suited to managing Docker-based infrastructure, but I'm not sure what they are.
Take a look at confd, a single statically-linked executable that can expand config file templates using environment variables:
https://github.com/kelseyhightower/confd
Basically, you add confd into your Docker image and execute it at runtime to do just-in-time config file generation. Here's an example for nginx:
https://github.com/grosskur/nginx-confd-dockerfile
You can create separate environment variable files for beta/staging/prod and pass --env-file to "docker run".
This lets you use the same Docker image across all your environments and avoid the operational complexity of mounting config files in Docker volumes.
https://github.com/kelseyhightower/confd
Basically, you add confd into your Docker image and execute it at runtime to do just-in-time config file generation. Here's an example for nginx:
https://github.com/grosskur/nginx-confd-dockerfile
You can create separate environment variable files for beta/staging/prod and pass --env-file to "docker run".
This lets you use the same Docker image across all your environments and avoid the operational complexity of mounting config files in Docker volumes.
You may want to look at how the docker-registry image is configured with environment variables. They have one image that can be used with files/S3/ceph/more configurations that are selected with variables. It's a pretty elegant way of having many configuration options in my opinion, except you still need to figure out how to 'docker run' the image.
https://github.com/docker/docker-registry
https://github.com/docker/docker-registry
I would go with building the config into the image and tagging the resulting image with the environment name, if that's possible.
We've been using chef in the past to manage docker, which never felt very good because the main cookbook was somewhat buggy (but it has gotten better recently).
We now use mesos+marathon(+chronos for deployment) for running our docker container, which sounds much more overkill than chef, but turned out to work much better and cleaner.
We've been using chef in the past to manage docker, which never felt very good because the main cookbook was somewhat buggy (but it has gotten better recently).
We now use mesos+marathon(+chronos for deployment) for running our docker container, which sounds much more overkill than chef, but turned out to work much better and cleaner.
Your best options are:
a. environment varaibles (if that's an option)
b. mount the file when you launch the container
I'm using (b) for our nginx configs, you mount only the single config file as read-only, then let chef copy up the config before mounting/launching.
I'm using (b) for our nginx configs, you mount only the single config file as read-only, then let chef copy up the config before mounting/launching.
> As I’m looking for a way to build a container without having it host the whole build environment (such as Puppet modules, ssh private keys to the Git repository, etc)
Why would you need to check out something from git within the container? That sounds like an unusual setup. Normally you'd check out your repo, then run a build from within it.
> A Dockerfile to build a container with a basic Ruby stack.
> A Dockerfile from #1 to build the deps: checkout the application on Github, install the packages, run bundle install, then remove the application. I’ll be able to share this container with both applications. Big win!
> A Dockerfile from #2 to download the application from Github, then setup everything. So my dependencies are already installed, and it goes fast every time I don’t need to update them.
Shouldn't this just be
Application with a dockerfile like this
Check out repo.
Run docker build.
That way it's all cached, and you don't repeatedly build the dependencies. Has the author not seen docker caching?