Folding Plug System(minkyu.co.uk)
minkyu.co.uk
Folding Plug System
http://www.minkyu.co.uk/Site/Product/Entries/2009/4/20_Folding_Plug_System.html
33 comments
A year ago? I'm sure it was created by a product design student at the Royal College of Art a few months ago.
The site dates it as 20 April 2009.
The site dates it as 20 April 2009.
The europlugs have some pretty solid pins and don't seem to fall out of sockets, but they don't have an earth pin or fuses.
Of course some euro plugs have what I'd call a "sneaky" earth, that isn't a pin but simply a contact on the other two parts of the socket and plug.
See the two pictures in this (quickly googled) discussion, for a clear illustration - http://forum.expatica.com/print.html&client=printer&...
See the two pictures in this (quickly googled) discussion, for a clear illustration - http://forum.expatica.com/print.html&client=printer&...
The Australian standard is similar to what you describe. It tends to be a lot sturdier than the US design, while not as big as the UK plug.
The euro plugs don't fall out of the wall only if the plug is euro-plug only. Otherwise sometimes they don't even make good contact.
Well we generally bend the pins to keep them from falling out of the wall.
Nice!
I wonder how well the moving contacts to bring the power from the live and neutral to the power cable will survive, though - they may become worn and intermittent with time.
Do we really need the fold-out wings? Could we not just rotate the live and neutral pins into place, then plug it in? Or do the standards require a certain outline to keep fingers from the plugging-in bits?
I wonder how well the moving contacts to bring the power from the live and neutral to the power cable will survive, though - they may become worn and intermittent with time.
Do we really need the fold-out wings? Could we not just rotate the live and neutral pins into place, then plug it in? Or do the standards require a certain outline to keep fingers from the plugging-in bits?
The UK is notorious for their safety precautions. Not only do all plugs have a fuse in them, but wall outlets are usually behind a local fuse even before a home's circuit breaker.
The fold out wings provide a great way to minimize the possibility of contact with the live contact.
And it's just so pretty!
The fold out wings provide a great way to minimize the possibility of contact with the live contact.
And it's just so pretty!
>wall outlets are usually behind a local fuse even before a home's circuit breaker
I live in the UK and I don't know anyone with fuses in the actual outlet. We normally have a circuit breaker and fuse in the plug. For things like my PC, I also use 4-way extension cords which have an additional fuse and surge protector.
I live in the UK and I don't know anyone with fuses in the actual outlet. We normally have a circuit breaker and fuse in the plug. For things like my PC, I also use 4-way extension cords which have an additional fuse and surge protector.
Given that the UK mains standard runs on 230 volts AC, yes, we need safety precautions.
Touching a 110 volt terminal: painful but probably not serious. Touching a 230 volt terminal: very painful and quite possibly very serious.
Touching a 110 volt terminal: painful but probably not serious. Touching a 230 volt terminal: very painful and quite possibly very serious.
One of the best workarounds I've seen. Sometimes full solutions are just not possible (i.e. changing the whole standard plug system in a country).
I thought I'd seen this before. A quick search found this:
http://news.ycombinator.com/item?id=670856
If you're interested in this, you might like to read the discussion there as well. Many points are being re-made.
http://news.ycombinator.com/item?id=670856
If you're interested in this, you might like to read the discussion there as well. Many points are being re-made.
A brilliant design. And a brilliant design presentation.
Cool! Would like to know how he made the first prototype
Looks like good ol' fashion resin 3D printing or rough form injection molding. Most university ID shops have those facilities now-a-days.
Check out http://en.wikipedia.org/wiki/3D_printing (http://en.wikipedia.org/wiki/Fused_deposition_modeling more specifically)
Check out http://en.wikipedia.org/wiki/3D_printing (http://en.wikipedia.org/wiki/Fused_deposition_modeling more specifically)
It's great because Apple pretty much has to license it, given how much pride they take in their power cord design.
That looks very good. I really hope they become commercially available and commonplace.
I love this. Having used UK plugs for most of my life I know how cumbersome they can be.
My only concern is that many devices which change voltages such as computer power supplies often have some hefty capacitors in them. Even with the regular plugs I've occasionally got shocked (enough to hurt my fingers) by touching both pins while the device is plugged in.
If people have to rotate the pins in order to use the plug it's possible some devices with capacitors would be less safe to use as there is a risk that the capacitors would empty whenever you tried to rotate the pins.
My only concern is that many devices which change voltages such as computer power supplies often have some hefty capacitors in them. Even with the regular plugs I've occasionally got shocked (enough to hurt my fingers) by touching both pins while the device is plugged in.
If people have to rotate the pins in order to use the plug it's possible some devices with capacitors would be less safe to use as there is a risk that the capacitors would empty whenever you tried to rotate the pins.
That's really cool.
I find that I can get by with a Euro plug pretty much anywhere except the USA. Southeast Asia, Oz, and other places that standardize on US (or AUS) plugs often also accept the round-pinned EU plug.
Here in the UK, I just keep a teaspoon in my laptop bag for cramming into the ground slot. Thus, opening the other two holes wide enough to jam the EU plug in.
AC adapters on laptops already know how to handle any voltage/frequency combo in the world. It's just a matter of of physically cramming the metal bits into the socket.
I find that I can get by with a Euro plug pretty much anywhere except the USA. Southeast Asia, Oz, and other places that standardize on US (or AUS) plugs often also accept the round-pinned EU plug.
Here in the UK, I just keep a teaspoon in my laptop bag for cramming into the ground slot. Thus, opening the other two holes wide enough to jam the EU plug in.
AC adapters on laptops already know how to handle any voltage/frequency combo in the world. It's just a matter of of physically cramming the metal bits into the socket.
I love seeing the sequence from design -> prototype.
I agree with some of the other posters though, any time you have a lot of current going through a connection that rotates / moves, you have the potential of reliability problems.
However, I don't think those are insurmountable problems, and good engineering could make this a reality.
One advantage is, if I recall correctly, UK is 220V as opposed to US 110V, so less current will be flowing through those contacts.
I agree with some of the other posters though, any time you have a lot of current going through a connection that rotates / moves, you have the potential of reliability problems.
However, I don't think those are insurmountable problems, and good engineering could make this a reality.
One advantage is, if I recall correctly, UK is 220V as opposed to US 110V, so less current will be flowing through those contacts.
The UK is traditionally 240V, but I believe it's 230V now, so as to be in line with the rest of the EU.
230V -6% +10%, which is just a fancy standards hack to make all of EU technically 230 without having to change voltage from 240
And what's wrong with bare wires pushed into the socket with matches?
That's how real engineers do it.
A bit off-topic, but does anybody know how that site is displaying its video? I don't have flash or moonlight installed, so it was a bit of a shock to hear my computer actually playing a video feed. I browsed their HTML source, but I didn't see any object tags, video tags, nor anything else that would obviously play video.
The page gave me a "plugin not installed" error (from firefox) for quicktime.
I wonder what material they've confirmed they'll be using to ensure that it doesn't just snap and break under the regular wear of plug usage.
I often wonder why plug design is drastically different between North America, Europe, and Asia.
There's more to it than that even: http://en.wikipedia.org/wiki/AC_power_plugs_and_sockets
Idea is good, but it is still workaround for bigger problem.
World needs better designed power plugs
World needs better designed power plugs
Something inbetween US and UK plugs would be nice. UK is rock solid, can't bend pins, has no chance of sparks, will never fall out of the socket, has fuse + other safety features (Covered pins), socket only opens Live+Neutral once earth is inserted etc, but is a bit clunky.
OTOH, US plugs spark, get bent pins, fall out of the wall, don't require an earth+fuse, are pretty dangerous IMHO, but on the plus side they're pretty flat :/