Bomb Jack display hardware(github.com)

119 pointsby mrandish2 anni fa22 comments

https://github.com/martinpiper/BombJack/blob/master/README.md

5 comments

Thank you for posting. This is one of my projects. I was wondering why all the subscribers joined today.

What's the relation between this and MAME? I don't have the Bomb Jack arcade PCB (I've got others though) but I do have a Pi2JAMMA and, well, Bomb Jack using MAME.

Is this project something that could be replacing (partial?) hardware on a real Bomb Jack PCB (not unlike what some are doing with C64 chips, where new replacement can be dropped in place of old broken chips)?

wellytopness2 anni fa

It started off as a direct Bombjack arcade hardware replacement, it then grew way beyond what the arcade was capable of. MAME is software, this is hardware, no relation. :) Although interestingly the first version of the hardware did allow me to find a bug in the MAME implementation.

Ylpertnodi2 anni fa

I have to admit, and it only happened once, i threw a sickie at work (92?) to finish playing bombjack.

Another game I'm looking for is 'prensorium'.

chrisallick2 anni fa

jesus dude... thats amazing.

demondemidi2 anni fa

(4)

mrandish2 anni fa

I randomly stumbled across this impressive, home brew graphics subsystem for C64 today. The goal seems to be pushing the boundaries of what would have been possible with period-correct, through-hole 74LS parts (no FPGA or ASIC) toward advanced arcade-level graphics hardware. Quite ambitious for a one-person hobby project and, as the video below shows, very successful!

https://www.youtube.com/watch?v=MLVZav7mVcI&t

Dwedit2 anni fa

What about ULAs? That's what the ZX spectrum used. They're not quite FPGAs, and not quite ASICs.

ikari_pl2 anni fa

is it C64-specific though?

ralferoo2 anni fa

There are numerous mentions to Z80 as well as C64, and the arcade hardware was Z80 and this project started life as a plug-in compatible board, so presumably it still has support for being driven by Z80.

If it started life as a Z80 board, probably the C64 interface is just synthesising _RD, _WR and _MREQ (and maybe _IORQ) that a Z80 design would need from the RD/_WR, clock and high address bits on 6502.

wellytopness2 anni fa

8 data bits, write signal, reset address state logic. Each byte written will prime the 24 bit address to write to in the hardware and then store bytes with auto-incrementing address. This lets the C64, or any other machine capable of generating those signals, to write large amounts of memory to the hardware.