Tindie: an etsy for electronics(tindie.com)
tindie.com
Tindie: an etsy for electronics
http://www.tindie.com/about/
9 comments
Hey guys- I made Tindie. Thanks for your support. If you have any ideas, feedback or questions, definitely let me know- emile
Have you tried reaching out to the folks at Etsy? I think they would love it if the emerging indie gadgets scene was cultivated more.
I haven't...any Etsy folks out there?
I've talked with Noah Sussman several times about selling indie electronics/hardware projects* on Etsy. He says: "Yes, game on!" (I'm paraphrasing.) He's a cool guy to know, regardless. http://twitter.com/noahsussman
And if you want to go straight to the source, you should ask for a beer/coffee with Chad: http://twitter.com/chaddickerson
* I'm potentially searching for a place to sell my "Robot that plays Angry Birds" (http://bitbeam.org/bitbeam-robots-invade-pycon). I go back and forth on whether I should roll my own store, or use a site like Tindie/Etsy/Kickstarter/Inventables, or all of the above. :-)
And if you want to go straight to the source, you should ask for a beer/coffee with Chad: http://twitter.com/chaddickerson
* I'm potentially searching for a place to sell my "Robot that plays Angry Birds" (http://bitbeam.org/bitbeam-robots-invade-pycon). I go back and forth on whether I should roll my own store, or use a site like Tindie/Etsy/Kickstarter/Inventables, or all of the above. :-)
I love it. Been looking for someone who could build some custom electronics for me for a long time!
I'd love to see some original guitar/music technology. Guitar Center and distribution of creative music technology could be a lot better.
Great idea, but someone needs to set up "regretindie" too (cf. http://regretsy.com)
regrindie? ( regrind is plastic ground down from plastic waste, which is mixed in with "virgin" plastic to make new plastic waste...uh...products )
Awesome - I've been wondering why a service like this doesn't exist for a while. I recon their a quite a lot of people who don't have the technical skills to built their own stuff but need something less finished that a full commercial product - this could be a great outlet for something like that.
Regulations perhaps might be a issue? Do all electronics sold to a consumer require extensive testing? Here in Australia i'd be surprised if there wasn't a truckload of hoops to jump through for electronics.
Soon we will need a qualified electrician to install light bulbs, who knows who difficult it is to sell a electronic device as a independent. Hopefully I'm being overly pessimistic.
Soon we will need a qualified electrician to install light bulbs, who knows who difficult it is to sell a electronic device as a independent. Hopefully I'm being overly pessimistic.
Unfinished products, ie kits are generally exempt. This came as a leaflet with a TI dev-kit I just bought:
This EVM is provided to you by TI and is intended for your INTERNAL ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY. It is provided ”AS IS” and ”WITH ALL FAULTS.” It is not considered by TI to be fit for commercial use. As such, the EVM may be incomplete in terms of required design−, marketing−, and/or manufacturing−related protective considerations, including product safety measures typically found in the end product. As a prototype, the EVM does not fall within the scope of the European Union directive on electromagnetic compatibility and therefore may not meet the technical requirements of the directive.
This EVM is provided to you by TI and is intended for your INTERNAL ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY. It is provided ”AS IS” and ”WITH ALL FAULTS.” It is not considered by TI to be fit for commercial use. As such, the EVM may be incomplete in terms of required design−, marketing−, and/or manufacturing−related protective considerations, including product safety measures typically found in the end product. As a prototype, the EVM does not fall within the scope of the European Union directive on electromagnetic compatibility and therefore may not meet the technical requirements of the directive.
Electronics sold direct to end users must comply with FCC, CE LVD/EMC and other regulations. The vast majority of the hobby market ignores this though, and they don't get enforced much except for intentional transmitters.
In the US products with switching frequencies faster than 9 khz are supposed to be tested for FCC part 15 compliance but you are not required to have CE or UL testing.
However most retailers will not carry a product that does not have a CE or UL mark
However most retailers will not carry a product that does not have a CE or UL mark
Cool idea! One thing you should do is add some feedback when someone tries to reserve a username that is already taken. It currently just refreshes the page. I wasn't sure if it worked for me until I tried something different.
Thanks Mike - will do today! - emile
This is seriously awesome. I don't have a 3D printer or any real facilities for making electronics, but I can't wait to see what kinds of things people make. :)
Will work perfectly with the rising 3d printing and soon-to-fruition printed circuits industries
Why not use Etsy?
Love this idea! Would love to help out.