Local Variables(craftinginterpreters.com)
craftinginterpreters.com
Local Variables
http://www.craftinginterpreters.com/local-variables.html
5 comments
I think functional scope was a step forward from block scope, so I got very sad when block scope got into JavaScript and is now the standard. JS still allow you to use function scope, and I still do, but most tutorials now use block scope.
With function scope I can declare variables where they are used, they will be automatically hoisted. This also solves the issue with using a variable before they are declared ... you declare variables where they are used.
Function scope also encourages the use of functions and closures, which makes (async) programing more fun.
With function scope I can declare variables where they are used, they will be automatically hoisted. This also solves the issue with using a variable before they are declared ... you declare variables where they are used.
Function scope also encourages the use of functions and closures, which makes (async) programing more fun.
> and because Haskell is lazy, `let a = a` is a nonterminating computation
I am pretty sure that lazyness has nothing to do with this.
I am pretty sure that lazyness has nothing to do with this.
Maybe I worded that wrong. In OCaml and other strict languages, `let (rec) a = a` doesn't make sense, because `a` doesn't have a value when you are defining it to be itself. When I write `let a = a` in Haskell, what happens is that `a` is set to a thunk whose code pointer points to its own evaluation code. When the thunk gets forced, it tries to evaluate itself.
Doing my research, I was wrong about the "nonterminating computation" part; when the thunk gets forced, it gets marked as a "black hole," detecting the infinite recursion in this case.
Doing my research, I was wrong about the "nonterminating computation" part; when the thunk gets forced, it gets marked as a "black hole," detecting the infinite recursion in this case.
I thought the choice to implement locals and all of their semantics using just the main stack was both curious and surprising. (I'm most familiar with perl's implementation, which requires a bunch of stacks flying in for formation to implement it's complex scoping semantics.)
In the book, Bob says he designed the language such that it would be possible to use just one stack. What does that mean? It sounds very discouraging for newbies because it implies a lot of foresight or trial and error.
Overall, while this is among the most interesting subjects covered, I find the chapter a bit lacking in either one of two ways: either it is for beginners, and then the chapter feels very magical or is for intermediates and then a bit of extra verbiage on the design choices that led you there would be appropriate.
Nitpick: I would totally have stopped low and done the -1 initialization trick as well. But yuck. ;)
In the book, Bob says he designed the language such that it would be possible to use just one stack. What does that mean? It sounds very discouraging for newbies because it implies a lot of foresight or trial and error.
Overall, while this is among the most interesting subjects covered, I find the chapter a bit lacking in either one of two ways: either it is for beginners, and then the chapter feels very magical or is for intermediates and then a bit of extra verbiage on the design choices that led you there would be appropriate.
Nitpick: I would totally have stopped low and done the -1 initialization trick as well. But yuck. ;)
The constraint on the language for this to work well is fairly natural and is actually described in the article: the language should follow lexical scoping.
Unfortunately, since some dynamic languages do not respect lexical scoping, programmers in these languages tends to think of local variables and scoping as something very complicated. It doesn't need to be.
Unfortunately, since some dynamic languages do not respect lexical scoping, programmers in these languages tends to think of local variables and scoping as something very complicated. It doesn't need to be.
You can have plain lexical scoping but still be unable to use a simple stack in all cases, due to closures.
The author describes this additional constraint that they have on top of lexical scoping.
> We have to be OK with only allocating new locals on the top of the stack, and we have to accept that we can only discard a local when nothing is above it on the stack.
The author describes this additional constraint that they have on top of lexical scoping.
> We have to be OK with only allocating new locals on the top of the stack, and we have to accept that we can only discard a local when nothing is above it on the stack.
Well, there are lot's of well known compiler techniques to handle closures in that context. It's a little bit out of scope of the article, but it's not very complicated either.
I know that but you said the constraint needed was lexical scoping - that constraint is insufficient and you need additional constraints on the language design.
If you’re happy for the compiler to copy variables out of the closed-over scope when returning the closure, this can still be handled with a single stack. That’s what C++ lambdas do: “Closures” in C++ are locally-allocated structures that hold used variables as local (stack-allocated) member variables. Creating a closure copies closed-over variables (or pointers/references to them). Returning a closure from a function returns a logical copy (which can be optimised away) of the structure.
(Don’t get me wrong, this obviously still implies additional constraints, but it gets fairly close to universal closures.)
(Don’t get me wrong, this obviously still implies additional constraints, but it gets fairly close to universal closures.)
I don't really understand that point of view - you can use a single stack as long as you actually use the heap in addition to a single stack?
C++ closures do not, by themselves, use the heap. Every closure in C++ gets translated by the compiler to a unique type that contains either copies of or references to the objects being closed over. If you choose to use copies, then whether or not anything is allocated on the heap depends on the copy constructor; if you use references then there is no copying, but it's up to you to ensure lifetime.
This is roughly how Java works with anonymous types closing over variables also. That's why the variables must be declared `final`. It just copies the local values over into the anonymous type and calls it a day. Of course, since the only thing allocated on the stack are primitives and pointers, and everything on the heap is subject to garbage collection, this is a pretty straight-forward operation.
I don't know if lambdas work the same way. I know in some ways they work like anonymous types, and not in others.
I don't know if lambdas work the same way. I know in some ways they work like anonymous types, and not in others.
yes, it works the same way with lambdas, the lambda proxy (the class that implements the functional interface) contains the copy of the local values.
Here is the code that generate the constructor of a lambda proxy http://hg.openjdk.java.net/jdk/jdk/file/3cabb47758c9/src/jav...
Here is the code that generate the constructor of a lambda proxy http://hg.openjdk.java.net/jdk/jdk/file/3cabb47758c9/src/jav...
C++ lambdas do not use the heap. As I wrote, they are stack allocated.
You're talking about undefined behaviour - this is a badly broken feature of C++ because it does not move the local variable it references onto the heap or some other alternate data structure.
Look up the upwards funarg problem.
> The upwards funarg problem arises when the calling function refers to the called/exited function's state after that function has returned. Therefore, the stack frame containing the called function's state variables must not be deallocated when the function returns, violating the stack-based function call paradigm.
C++ violates the constraint we're talking about.
Look up the upwards funarg problem.
> The upwards funarg problem arises when the calling function refers to the called/exited function's state after that function has returned. Therefore, the stack frame containing the called function's state variables must not be deallocated when the function returns, violating the stack-based function call paradigm.
C++ violates the constraint we're talking about.
No, I’m not talking about UB. Although you’re right that if you use references rather than copies and return a lambda then, yes, you’ll run into UB. The solution to this is to use copies, as mentioned.
> Look up the upwards funarg problem.
I’m well aware of upward funargs and what I’ve described specifically implements upward funargs in C++. See https://godbolt.org/z/KZiBNB. Note that this code does not perform any heap allocation, and the closed-over variable `i` is saved from the local scope and made available to the caller via the lambda.
> Look up the upwards funarg problem.
I’m well aware of upward funargs and what I’ve described specifically implements upward funargs in C++. See https://godbolt.org/z/KZiBNB. Note that this code does not perform any heap allocation, and the closed-over variable `i` is saved from the local scope and made available to the caller via the lambda.
> Although you’re right that if you use references rather than copies and return a lambda then, yes, you’ll run into UB. The solution to this is to use copies, as mentioned.
That was the context I thought we were having the conversation in - capturing local variables. I'd describe what you mean as capturing local values. If you're copying the value from a variable then you're not capturing the variable.
I can see why you're arguing it your way now.
That was the context I thought we were having the conversation in - capturing local variables. I'd describe what you mean as capturing local values. If you're copying the value from a variable then you're not capturing the variable.
I can see why you're arguing it your way now.
> it does not move the local variable it references onto the heap
C++ doesn't do such thing automatically, but there's nothing preventing you to do it yourself. If you intend to use a local variable whose lifetime would not normally outlast the closure, feel free to use std::move and a move constructor. In general C++ gives you the tools to manage memory manually or semi-automatically, but not totally automatically. And it also doesn't, unlike Rust, force you to use memory correctly.
C++ doesn't do such thing automatically, but there's nothing preventing you to do it yourself. If you intend to use a local variable whose lifetime would not normally outlast the closure, feel free to use std::move and a move constructor. In general C++ gives you the tools to manage memory manually or semi-automatically, but not totally automatically. And it also doesn't, unlike Rust, force you to use memory correctly.
Note that in chapter 3.8.1 he writes "As you can imagine, implementing [closures] adds some complexity because we can no longer assume variable scope works strictly like a stack where local variables evaporate the moment the function returns. We’re going to have a fun time learning how to make these work and do so efficiently."
I found the page layout extremely well-suited to grokking the content better. The right "sidebar" (in quotes because it's not a dedicated column, just emulated using CSS positioning) containing notes for the text & code along with figures worked great. I may have to look into recreating this kind of layout for my blog or other documentation.
For those wondering, it looks like this is the final version of the latest chapter of a book that's work in progress. Fresh out of the press, if you want.
https://twitter.com/munificentbob/status/1109876226104057856
https://twitter.com/munificentbob/status/1109876226104057856
Been following this book for a bit but I can't quite find a good way to learn from it. Should I first read each chapter and create my own language? implement his language using language other than Java? Type by hand his source code following along and trying to comprehend the details?
Typing by hand is an underrated option. Inevitably there's gonna be transcription errors, so you'll have to correct them and in the process understand the code. Also, just take a moment at the end of a chapter to review the code and make sure it follows. I thought that it wasn't doing much either until I realized I actually understood what was going on!
After that, you could maybe port it to a different language. But doing that the first time around would be a little hard. Especially if you wanted to keep the code idiomatic to the language.
After that, you could maybe port it to a different language. But doing that the first time around would be a little hard. Especially if you wanted to keep the code idiomatic to the language.
> Type by hand his source code following along and trying to comprehend the details?
Isn't that the only way to learn from any programming book ? At least that's what I have always done. I am curious as to what other way people learn.
Isn't that the only way to learn from any programming book ? At least that's what I have always done. I am curious as to what other way people learn.
I tend to read a section carefully, then close the book and try to reproduce the example without looking at it again. Of course I'll allow myself to use online reference material, as I do in real-life programming. If I really get stuck I'll take a look at the book, but just enough to unstuck me. The goal is obviously not to reproduce the example line by line but to reproduce what it does with the same global structure.
I've found that it's easy to zone out if I'm just typing exactly what's on the page in front of me. Following along but in a different language can keep you more engaged and think more about what's going on.
It also becomes a bit of a battle against the desire of copying/pasting the code (It's even more tempting since it's an e-book with the code already formatted), not to mention that some parts are tedious to type like enumerators with many string elements
That's a good point. I also have a problem with zoning out when reading technical books. I should give your technique a try.
I unconsciously change variable names when typing code samples which later forces me to track data flow and dependencies
Pick one! :) But I'm curious (I write some similar posts) if this is because of the way the sections are written that inhibits following along?
and
. Some programming languages have the idea of "let rec" versus "nonrecursive let." In Haskell, `let` is recursive, and because Haskell is lazy, `let a = a` is a nonterminating computation. In OCaml, `let` is non-recursive and `let rec` is recursive, and only certain recursive definitions are allowed. (You can do `let rec a = 0::a`, but not `let rec a = a`.)
Scheme has `let`, where none of the variables are in scope for any definition, `let*`, where each variable is in scope in the successive definitions, and `letrec`, where all of the variable are in scope for all definitions. According to http://www.r6rs.org/final/r6rs.pdf, Scheme initializes letrec'd variables to a "black hole."