Fairphone 2: world's first modular phone goes on sale(bbc.co.uk)
bbc.co.uk
Fairphone 2: world's first modular phone goes on sale
http://www.bbc.co.uk/news/technology-34982724
19 comments
> That misses the entire point of a modular computing device
The point with Fairphone is repairability - their purpose is to lower impact on the environment, and improve the social outcome of the trade along the supply chain. It's really the same sort of modularity for repair as the old Thinkpads. It's not supposed to be something like Project Ara.
This is why, I saw the other week, Fairphone 2 had been given a 10/10 score by iFixit:
https://www.ifixit.com/Teardown/Fairphone+2+Teardown/52523
And you can see on that page, you can break the phone down into:
* Case
* Screen
* Battery
* Main antenna
* Headphone jack, earpiece speaker, and front-facing camera module
* Rear-facing camera module
* Microphone module
* Main circuitboard, with extra USB device interface for future extensions.
It may be that calling it the first modular smartphone is taking it too far, it depends really on what you mean by the word. Although I doubt there had been a phone like this before, designed to be taken apart and reconstructed. These days most phones don't even have a removable battery.
Edit: FWIW, I think this also has benefits for software. Given the difficulties of phone hardware, if you can keep the phone going for longer, it makes a more stable base for ROM development. They also make it easy to root the device (and I think that will not void the warranty), and provide the code and instructions to build and flash their AOSP-derived OS in its entirety. They still have binary blobs unfortunately (you can read their various struggles with hardware supplier around this on their blog), but it's all a step in the right direction.
http://code.fairphone.com/projects/fp-osos/dev/fairphone-os-...
The point with Fairphone is repairability - their purpose is to lower impact on the environment, and improve the social outcome of the trade along the supply chain. It's really the same sort of modularity for repair as the old Thinkpads. It's not supposed to be something like Project Ara.
This is why, I saw the other week, Fairphone 2 had been given a 10/10 score by iFixit:
https://www.ifixit.com/Teardown/Fairphone+2+Teardown/52523
And you can see on that page, you can break the phone down into:
* Case
* Screen
* Battery
* Main antenna
* Headphone jack, earpiece speaker, and front-facing camera module
* Rear-facing camera module
* Microphone module
* Main circuitboard, with extra USB device interface for future extensions.
It may be that calling it the first modular smartphone is taking it too far, it depends really on what you mean by the word. Although I doubt there had been a phone like this before, designed to be taken apart and reconstructed. These days most phones don't even have a removable battery.
Edit: FWIW, I think this also has benefits for software. Given the difficulties of phone hardware, if you can keep the phone going for longer, it makes a more stable base for ROM development. They also make it easy to root the device (and I think that will not void the warranty), and provide the code and instructions to build and flash their AOSP-derived OS in its entirety. They still have binary blobs unfortunately (you can read their various struggles with hardware supplier around this on their blog), but it's all a step in the right direction.
http://code.fairphone.com/projects/fp-osos/dev/fairphone-os-...
I disagree (Disclaimer: I'm one of the early backers). The current trend in mobile phones is towards more closed systems. Components are glued together, and often it's not often possible for a user to even change a battery. That's what I would call a big monster.
The Fairphone is the first phone to get a 10/10 repairability score from ifixit. Though there could be more components, it's definitely a step in the right direction. The whole point is to a able to use that phone for 4-5 years. If one part breaks (touchscreen, battery), you can replace that part yourself. If a better camera becomes available, I can choose to update just the camera instead of buying a new phone. Cheaper for me as a user and better for the environment.
The Fairphone is the first phone to get a 10/10 repairability score from ifixit. Though there could be more components, it's definitely a step in the right direction. The whole point is to a able to use that phone for 4-5 years. If one part breaks (touchscreen, battery), you can replace that part yourself. If a better camera becomes available, I can choose to update just the camera instead of buying a new phone. Cheaper for me as a user and better for the environment.
All my iPhones have lasted 4-5 years. Granted I had to get the screen replaced on one of them after my bird dropped it off the counter.
Wtf are you people doing with your phones? I downright abuse mine (think longboarding falls at 50kph with phone flying out of pocket) and it survives all.
Wtf are you people doing with your phones? I downright abuse mine (think longboarding falls at 50kph with phone flying out of pocket) and it survives all.
Do you have an iphone6? These models are garbage from a durability POV. the beveled glass shatters very easily on the corners.
I left my 3gs on the roof of my car and it flew into the street when i pulled out of the gas station... intact. My brother in law is a fireman, and his fell out of an aerial ladder 4-5 stories up, and survived with bruises. I dropped a 6 and 6+ from chair height into carpet tile and shattered the screen on the plus, and cracked it on the 6. It's now held together with scotch tape. :)
I left my 3gs on the roof of my car and it flew into the street when i pulled out of the gas station... intact. My brother in law is a fireman, and his fell out of an aerial ladder 4-5 stories up, and survived with bruises. I dropped a 6 and 6+ from chair height into carpet tile and shattered the screen on the plus, and cracked it on the 6. It's now held together with scotch tape. :)
Seems like you're a lucky guy. My current iPhone 4s is falling apart. One of the speakers doesn't work, battery lasts only half a day, and the power off button is broken. And I guess there won't be any software updates after the current iOS release.
The 4s is now in the 4-5 years since release category.
You are a lucky guy. My phone slipped off of my nightstand, falling all of two feet, but managed to break the digitizer at exactly the point that caused the entire screen to become disabled.
https://en.wikipedia.org/wiki/Lithium-ion_battery
Battery life
On average, lifetimes consist of 1000 cycles, although battery performance is rarely specified for more than 500 cycles. This means that batteries of mobile phones, or other hand-held devices in daily use, are not expected to last longer than three years.
Battery life
On average, lifetimes consist of 1000 cycles, although battery performance is rarely specified for more than 500 cycles. This means that batteries of mobile phones, or other hand-held devices in daily use, are not expected to last longer than three years.
You have a bird that carries your phone?
> If a better camera becomes available, I can choose to update just the camera instead of buying a new phone.
If a new transmission standard becomes available, you need to buy a new phone. This could have been avoided with a truly modular design that would have satisfied security-conscious people as well.
If a new transmission standard becomes available, you need to buy a new phone. This could have been avoided with a truly modular design that would have satisfied security-conscious people as well.
Admittedly being able to swap that out would be awesome, but you don't -have- to buy a new phone. 2G phones still work just fine.
A 2G phone works only as long as there's a network. Some of the 2G networks are shutting off in the next 1-2 years.
> This could have been avoided with a truly modular design
No. A new module interconnect bus standard might become available, which would limit you just as much when you compare to the competition with integrated phones which can change both in new devices as needed.
No. A new module interconnect bus standard might become available, which would limit you just as much when you compare to the competition with integrated phones which can change both in new devices as needed.
"That misses the entire point of a modular computing device - phone or otherwise."
No it doesn't. One major use of a more modular device is easier repairs. Many devices are difficult to repair to increase support or replacement revenue. A device whose modules are easy to replace is a differentiator and benefit as it let's us just use Google. :)
Of course, the modularity needs to focus on the devices that will break the most often. In mobile, I'd say it's screens, buttons, speakers, mic's, connectors, and maybe batteries.
No it doesn't. One major use of a more modular device is easier repairs. Many devices are difficult to repair to increase support or replacement revenue. A device whose modules are easy to replace is a differentiator and benefit as it let's us just use Google. :)
Of course, the modularity needs to focus on the devices that will break the most often. In mobile, I'd say it's screens, buttons, speakers, mic's, connectors, and maybe batteries.
>modular device
>more modular
different goalposts
>more modular
different goalposts
Not at all given you haven't defined modular. Do you need to be able to replace individual logic gates, memory blocks, or PCB connections? Do you need to replace components mentioned in specs? Something in between?
It's not at all clear that a modular phone needs to be anything but what I described. The goal would need to be much more specific.
It's not at all clear that a modular phone needs to be anything but what I described. The goal would need to be much more specific.
I had a similar reaction (although my problem is the RAM, I expect that 2GB will be too low soonish, I expect 3 right now, 4 for a device that is supposed to last long).
People on their forum came up with a good explanation for your and my reaction: The media calls this a modular phone, although it isn't. You want Project Ara.
This phone is supposed to last long. It's supposed to be more 'ethical', by picking a production chain according to the values of the company. By giving you ways to repair your phone without generating waste: Repair, don't throw away.
It is _not_ a custom phone, where everyone adds gadgets and features in .. blocks. That's Ara.
I'm interested in the FP2, but haven't fully convinced myself yet. I'm waiting for CM and ideally SailFish support and _hope_ for a hardware revision with more RAM. Until then I have to suffer this braindead, broken, useless POS that is a Samsung S6 Edge - or run around with a Flame and FxOS..
People on their forum came up with a good explanation for your and my reaction: The media calls this a modular phone, although it isn't. You want Project Ara.
This phone is supposed to last long. It's supposed to be more 'ethical', by picking a production chain according to the values of the company. By giving you ways to repair your phone without generating waste: Repair, don't throw away.
It is _not_ a custom phone, where everyone adds gadgets and features in .. blocks. That's Ara.
I'm interested in the FP2, but haven't fully convinced myself yet. I'm waiting for CM and ideally SailFish support and _hope_ for a hardware revision with more RAM. Until then I have to suffer this braindead, broken, useless POS that is a Samsung S6 Edge - or run around with a Flame and FxOS..
The slogan of the project is right now "Start a movement". That's also the start screen, at least on the FairPhone 1. So if you think modularity is good because it's fair, then you should consider buying it.
The FairPhone 1 also has its drawbacks, in particular not all materials are guaranteed to be fair. Also the GPS driver/software sucks. I guess if you buy the FairPhone because of hardware/software, you'll not become happy. If you buy it because you believe that phones should be fairer, than you might get really happy with it... ;)
The FairPhone 1 also has its drawbacks, in particular not all materials are guaranteed to be fair. Also the GPS driver/software sucks. I guess if you buy the FairPhone because of hardware/software, you'll not become happy. If you buy it because you believe that phones should be fairer, than you might get really happy with it... ;)
You're not alone. I'd be happy to gain some bulk on the device or lose some functionnality for the hard switchable (as in cut the power to specific) modules.
I disagree 100% with everything you said above.
There is obviously no 'truth' on this - it's a matter of preference. But I believe 99.99% of mobile consumers are with me on this.
The only things I care to replace / upgrade are:
1. Screen - assume that over time they get better 2. Camera - 3. Battery- 4. Main module with various chips that I don't care about in isolation. Ie I will never care to upgrade the comms module, the wifi or bt antenna, etc. Perhaps as faster processors come out / onboard memory gets cheaper, I'll care to upgrade that.
There is obviously no 'truth' on this - it's a matter of preference. But I believe 99.99% of mobile consumers are with me on this.
The only things I care to replace / upgrade are:
1. Screen - assume that over time they get better 2. Camera - 3. Battery- 4. Main module with various chips that I don't care about in isolation. Ie I will never care to upgrade the comms module, the wifi or bt antenna, etc. Perhaps as faster processors come out / onboard memory gets cheaper, I'll care to upgrade that.
It's about time. There's almost no difference between the Sony Z1c and Z1c except the Z1c is made of metal instead of plastic and is actually a better phone. Why are we replacing our every two years when phones from 2012 should still be able to do most of what we need to? Why are some of our newer phones built worse?!
The only thing I'm afraid of is this company won't survive because, after initial purchases, there'll be no reason to buy new phones. They'd need to grow horizontally, pulling in more customers from other brands.
They'd also have to push upgrades for cameras, screens, etc to keep existing users buying new parts. Even with an amazing device like this conceptually, capitalism and consumerism will find ways to rear their ugly heads to make this business with a superior product fight for survival while those companies with less durable/upgradeable hardware will tend to make more money because they can always push the latest device to the market.
The only thing I'm afraid of is this company won't survive because, after initial purchases, there'll be no reason to buy new phones. They'd need to grow horizontally, pulling in more customers from other brands.
They'd also have to push upgrades for cameras, screens, etc to keep existing users buying new parts. Even with an amazing device like this conceptually, capitalism and consumerism will find ways to rear their ugly heads to make this business with a superior product fight for survival while those companies with less durable/upgradeable hardware will tend to make more money because they can always push the latest device to the market.
I don't think the current version of the Fairphone will offer much in terms of upgradeability, unless they get really lucky with the technical evolution (it's going to be pretty hit-or-miss if newer parts are actually compatible enough to be made into exchangeable modules for older phones)
It's IMHO more important for repairs.
It's IMHO more important for repairs.
Specs look good, and the value proposition is interesting, as many articles state, it's about time a manufacturer did something different.
My wishlist for this kind of phones:
- OS support and updates beyond the standard 1 or 2 years (TBD, but I think they're aiming for a 3 year lifecycle)
- upgradable RAM, check :)
- upgradable internal memory, check :)
- replaceable battery, check :)
- glass fixable separately, nope (they do say it's much more sturdy than standard phones though)
- alternative OSs, check :)
things that don't influence my buying decision that much
- fairly traded materials (their original value proposition, which DID appeal a lot to the early backers :) )
Their success depends on appeal beyond their initial core backers, and whether someone comes up with cool or killer app modules :) (they mention some like solar cells, etc.)
My wishlist for this kind of phones:
- OS support and updates beyond the standard 1 or 2 years (TBD, but I think they're aiming for a 3 year lifecycle)
- upgradable RAM, check :)
- upgradable internal memory, check :)
- replaceable battery, check :)
- glass fixable separately, nope (they do say it's much more sturdy than standard phones though)
- alternative OSs, check :)
things that don't influence my buying decision that much
- fairly traded materials (their original value proposition, which DID appeal a lot to the early backers :) )
Their success depends on appeal beyond their initial core backers, and whether someone comes up with cool or killer app modules :) (they mention some like solar cells, etc.)
Unfortunately this ships with an already outdated version of android and fairphone has explicitly said they will not guarantee support for Marshmallow. They have solid reasons for this, but that is a pretty big down side as a potential customer.
In fact, I'll go so far as to say: If the android OS cannot be kept updated, claiming that this phone has what it takes to last you more than 2 years is ridiculous. Even if you somehow get to keep security updates coming, there will be features in the new OS that are worth upgrading for even if the hardware is still perfectly fine, and apps will begin requiring an OS version you don't have.
In fact, I'll go so far as to say: If the android OS cannot be kept updated, claiming that this phone has what it takes to last you more than 2 years is ridiculous. Even if you somehow get to keep security updates coming, there will be features in the new OS that are worth upgrading for even if the hardware is still perfectly fine, and apps will begin requiring an OS version you don't have.
newer version of android stop being relevant after 4.4
down vote all you want, but there's no security or functionality after that. only silly animations and insane bright color schemes.
down vote all you want, but there's no security or functionality after that. only silly animations and insane bright color schemes.
They don't do bug or vulnerability fixes in new releases?
no relevant vulnerability since 4.4. before that you have ssl holes and lock screen issues. after that you only have to worry about vendor specific "enhancements" that only add issues.
There was a security update in November : http://www.androidcentral.com/androids-november-security-pat...
And from that link:
> Google also states the "most severe of these issues is a Critical security vulnerability that could enable remote code execution on an affected device through multiple methods such as email, web browsing, and MMS when processing media files,"
Sounds pretty relevant and severe to me.
And from that link:
> Google also states the "most severe of these issues is a Critical security vulnerability that could enable remote code execution on an affected device through multiple methods such as email, web browsing, and MMS when processing media files,"
Sounds pretty relevant and severe to me.
Android 6 fixes the permission system. That's pretty fundamental.
http://developer.android.com/training/permissions/requesting...
http://developer.android.com/training/permissions/requesting...
that's in my list of useless features.
if you don't use your phone like clueless people used their computers (i.e. install 20 browser tool bars and such) you have zero need for it.
also, that was included since 2.3 but never exposed (some custom firmwares did)
if you don't use your phone like clueless people used their computers (i.e. install 20 browser tool bars and such) you have zero need for it.
also, that was included since 2.3 but never exposed (some custom firmwares did)
I disagree. There are perfectly reasonable reasons for Facebook's messenger app to request access to my photos (so I can send them). If I don't use that feature though, there's no reason they should be able to secretly upload all my photos - which they could if they got the permission at install.
What about when an app you have updates, and requests a new permission you don't want to give? Either you never take an update again for that app (which might mean leaving in bugs and security holes) or uninstall the app and hunt around for a replacement that doesn't require even more extensive permissions. It's a pain.
From what I've read "upgradable RAM" is really more like "upgradable RAM if somebody designs, builds, and gets through certification a module with an upgraded SoC" which really isn't the same thing...
I love the value prop.
For the OS support, they cannot commit fully as they work with partners.
For the Fairphone 1 (released end 2013) they were able to secure licenses to get the source code and are working hard on making it live for as long as they can even if that means replacing Android: https://www.fairphone.com/2015/09/16/long-term-software-supp...
It's worth noting that they released the "Stagefright" fix very quickly.
For the OS support, they cannot commit fully as they work with partners.
For the Fairphone 1 (released end 2013) they were able to secure licenses to get the source code and are working hard on making it live for as long as they can even if that means replacing Android: https://www.fairphone.com/2015/09/16/long-term-software-supp...
It's worth noting that they released the "Stagefright" fix very quickly.
RAM is not upgradable (as far as I understand, and I'm involved in one of the 'WTH is the amount so small?' threads in their forum). The memory is sandwiched on top of the SoC I think?
MAYBE you'll be able to replace the core module at some point. But I don't know about any promises and it doesn't seem to be a focus.
MAYBE you'll be able to replace the core module at some point. But I don't know about any promises and it doesn't seem to be a focus.
It'd be nice if you could remove the mobile chip to have a device that strictly does Wi-Fi
The cost breakdown is astonishing. Close to 40 EUR or 10% of the average net sales price goes away for IP roalties.
http://fairphone.com/costbreakdown/
I would love to see which IP holders receive what portion for their IP.
http://fairphone.com/costbreakdown/
I would love to see which IP holders receive what portion for their IP.
Most likely the usual suspects: MPEG LA (for hardware video decoding), Microsoft (FAT patents), Google Play license, reference designs for the hardware, WiFi/BT/GSM licenses and patents, ARM and others for the CPU design.
That seems very low. I wonder if they classify some costs i would expect there into a different category.
I find it astonishing that you find it astonishing that we live in a society that expects people to pay for IP. Perhaps you are one of those that think that want to end IP entirely?
If I can use PC ecosystem as an analog, in grand scheme of things this will offer no price reduction to end consumer.
Me and my son just upgraded his PC. It was a 4 yr old PC. We wanted new graphics card and we had to replace entire PC except power supply (barely!) and the case.
Even more fun, we wanted to build a PC from the leftover parts for friend of my son who is less fortunate. OK not top of the shelf, but he can play some games. We ended up spending $150 for new power supply, overpriced memory (DDR2), thermal grease, new fan (plastic leg broke off the original) and set of screws (where are they when you need them?).
In the end, upgrade = new PC, setting up the old one was still super expensive ($150).
Another factor is: these phones get a beating in daily use. While it may still make sense (technically) to keep some components during upgrade, they will be in bad bad shape.
It may make sense in context of repairs. Just like a car: I will fix it buying parts as needed, but after N years and M miles I will replace it.
Me and my son just upgraded his PC. It was a 4 yr old PC. We wanted new graphics card and we had to replace entire PC except power supply (barely!) and the case.
Even more fun, we wanted to build a PC from the leftover parts for friend of my son who is less fortunate. OK not top of the shelf, but he can play some games. We ended up spending $150 for new power supply, overpriced memory (DDR2), thermal grease, new fan (plastic leg broke off the original) and set of screws (where are they when you need them?).
In the end, upgrade = new PC, setting up the old one was still super expensive ($150).
Another factor is: these phones get a beating in daily use. While it may still make sense (technically) to keep some components during upgrade, they will be in bad bad shape.
It may make sense in context of repairs. Just like a car: I will fix it buying parts as needed, but after N years and M miles I will replace it.
I also recently upgraded the GPU in my ~4 year old PC, it cost me only the price of the new GPU and it's one of the only upgrades I've needed to make in that time.
It sounds like you're kind of an outlier in the build your own PC market -- it's pretty impressive you managed to find a motherboard supporting only the old DDR2 ram and having to replace the CPU fan. You also seem to have had to replace the motherboard to support your (likely PCI-E) GPU. Even before I built my first computer PCI-E was long supported by even cheap pre-built PCs.
There's a sweet spot around $600 for a PC, if you buy in this range you'll save money because you won't need to upgrade the majority of components in many years. I often recommend logicalincrements.com as it has PC prices per-component in tiers.
$150 is insanely cheap for a gaming PC and I don't think $150 has ever been "super expensive" by PC standards.
It sounds like you're kind of an outlier in the build your own PC market -- it's pretty impressive you managed to find a motherboard supporting only the old DDR2 ram and having to replace the CPU fan. You also seem to have had to replace the motherboard to support your (likely PCI-E) GPU. Even before I built my first computer PCI-E was long supported by even cheap pre-built PCs.
There's a sweet spot around $600 for a PC, if you buy in this range you'll save money because you won't need to upgrade the majority of components in many years. I often recommend logicalincrements.com as it has PC prices per-component in tiers.
$150 is insanely cheap for a gaming PC and I don't think $150 has ever been "super expensive" by PC standards.
"There's a sweet spot around $600 for a PC, if you buy in this range you'll save money because you won't need to upgrade the majority of components in many years. I often recommend logicalincrements.com as it has PC prices per-component in tiers."
Exactly. It's the same mantra I've always used when doing computer builds. Incidentally, the last gaming rig [1] I built was about $600 with more power than necessary. :)
[1] http://elitegamingcomputers.com/gaming-computers/#2
Exactly. It's the same mantra I've always used when doing computer builds. Incidentally, the last gaming rig [1] I built was about $600 with more power than necessary. :)
[1] http://elitegamingcomputers.com/gaming-computers/#2
I'm still not sure whether to upgrade or replace my 8 year old PC. Maybe I'll just hang on to it. It probably won't run the latest high-end games, but there's plenty of fairly recent stuff it still runs perfectly fine.
I dunno how are your sourcing those parts:
http://pcpartpicker.com/p/wwhHP6
But you seem to be picking very overpriced components. Also You are bit of outlier if your motherboard supports only DDR2 RAM. DDR3 has been in market for like 10 years and it is pretty cheap.
http://pcpartpicker.com/p/wwhHP6
But you seem to be picking very overpriced components. Also You are bit of outlier if your motherboard supports only DDR2 RAM. DDR3 has been in market for like 10 years and it is pretty cheap.
150$ for the parts he listed is not very expensive if he needs DDR2 which is unfortunate because it is too old and hard to get. But, i had a Q9550 QuadCore in 2009 that used DDR2 too which was quite common just 6 years ago.
I don't think price reduction was among the primary goals of this project.
Still, would you prefer to not have an option to disassemble the PC and replace it piecemeal? I know I wouldn't: more options is good. Also, in theory modularity creates possibilities for users to create uncommon configurations that would not otherwise be manufactured or cost impractically much (because of their rarity); it is not the case for Fairphone, but is the case for the PC and should be the case for Project Ara.
E.g. I have been modifying my PCs for low noise the way that should be outrageously expensive to buy serially. With Project Ara I should be able to assemble a high-end phone without the camera; a phone that goes all-out on battery life at all costs, etc. Fairphone has a noble goal to develop a smartphone with minimal harm to people and the planet, not necessarily a cheap or modular one: it is repairable (called modular here) only as a means to extend it useful life and thus reduce harm to the planet, even at the users' expense.
Still, would you prefer to not have an option to disassemble the PC and replace it piecemeal? I know I wouldn't: more options is good. Also, in theory modularity creates possibilities for users to create uncommon configurations that would not otherwise be manufactured or cost impractically much (because of their rarity); it is not the case for Fairphone, but is the case for the PC and should be the case for Project Ara.
E.g. I have been modifying my PCs for low noise the way that should be outrageously expensive to buy serially. With Project Ara I should be able to assemble a high-end phone without the camera; a phone that goes all-out on battery life at all costs, etc. Fairphone has a noble goal to develop a smartphone with minimal harm to people and the planet, not necessarily a cheap or modular one: it is repairable (called modular here) only as a means to extend it useful life and thus reduce harm to the planet, even at the users' expense.
>overpriced memory (DDR2)
If you aren't buying stuff like this on eBay, you are doing it wrong. A 4GB stick is less than $10 including shipping (new, even) whereas the cheapest 4GB module on newegg is over $70.
If you aren't buying stuff like this on eBay, you are doing it wrong. A 4GB stick is less than $10 including shipping (new, even) whereas the cheapest 4GB module on newegg is over $70.
I noticed recently while doing a price check on parts that NewEgg isn't the lowest on price anymore in a number of categories.
Why did you have to upgrade the entire pc to upgrade the graphics card? Pcie has been the only way to add graphics cards for a while now and newer versions of pcie are backwards compatible.
The upgrade argument of desktop in the 90s was already borderline as an argument. It was really worthy for people switching parts often. For long term it was clearly impossible to upgrade without changing 2/3 of it. And as you said, prices are only low for current mainstream parts. It may be an improvement to a previous era where nothing was swappable.
If you have, say, a 2011-vintage tower, you can do quite a bit to upgrade it: add more RAM (4GB to 12GB or 16GB); add an SSD to replace the HD; add or upgrade the graphics card; add ports via an expansion card etc.
Each upgrade can make a significant difference, and you don't necessarily waste anything, unless you change the graphics card. (If you go from 4GB to 16GB, you waste 2*2GB sodimms.)
Seems to me this was also true of earlier eras, too, only with smaller numbers.
Each upgrade can make a significant difference, and you don't necessarily waste anything, unless you change the graphics card. (If you go from 4GB to 16GB, you waste 2*2GB sodimms.)
Seems to me this was also true of earlier eras, too, only with smaller numbers.
SSD is an odd case, it is the simplest yet most impacting improvement to a computer.
Graphic card needs fast buses, if your mainboard gets behind you won't have access to the latest. I remember struggling with this long ago (pci -> agp; pcie 2x -> 4x).
It may be less an issue nowadays, so my point was off.
ps: It's funny you consider 2011 vintage, my most recent computer being from 2009 and I find it modern :)
Graphic card needs fast buses, if your mainboard gets behind you won't have access to the latest. I remember struggling with this long ago (pci -> agp; pcie 2x -> 4x).
It may be less an issue nowadays, so my point was off.
ps: It's funny you consider 2011 vintage, my most recent computer being from 2009 and I find it modern :)
It's funny you consider 2011 vintage, my most recent computer being from 2009 and I find it modern
Well, that's because I bought my i5-2500K desktop in 2011. I just chucked in a new hard drive and it's about to get another 8GB of RAM ;-)
My previous tower lasted 8 years. I'm not a gamer, but that one got a graphics card upgrade as well....
Well, that's because I bought my i5-2500K desktop in 2011. I just chucked in a new hard drive and it's about to get another 8GB of RAM ;-)
My previous tower lasted 8 years. I'm not a gamer, but that one got a graphics card upgrade as well....
PS: I believe he used the noun usage of 'vintage', referring to a desktop manufactured in 2011.
One advantage of a modular PC is that fixing a broken one can be much cheaper if you can pinpoint which component is broken.
It also helps a lot if the performance and requirements change at different speeds for different components. For a gaming PC you'll upgrade the GPU more often than you actually need to upgrade the CPU and the rest of the system. My 4 year old CPU is still fast enough (i2500k), but I upgraded the GPU in the meantime and added an SSD.
Reusing old parts can be pretty cheap, but probably doesn't make all that much sense if you need parts that aren't in common use anymore like the DDR2 in your case.
It also helps a lot if the performance and requirements change at different speeds for different components. For a gaming PC you'll upgrade the GPU more often than you actually need to upgrade the CPU and the rest of the system. My 4 year old CPU is still fast enough (i2500k), but I upgraded the GPU in the meantime and added an SSD.
Reusing old parts can be pretty cheap, but probably doesn't make all that much sense if you need parts that aren't in common use anymore like the DDR2 in your case.
I'm in India and I purchased a ~50$ 350W power supply (Corsair is the brand) for my computer. (my total PC price is 150$ and it can play older 3D games at medium settings)
The PC analogy is a good one...and this is exactly why I moved to Macs after a decade of building and upgrading "Frankenstein's monster" PCs at great expense (time and money). With my first Mac I started to treat computers as a means to an end, as opposed to an end in itself. I wanted to start using computers to produce things - graphics, music, websites, apps. I got bored of endlessly tinkering with the hardware itself.
High-end Apple computers have always targeted the producer rather than the consumer. I look back to the days of upgrading graphics cards, heatsinks, power supplies etc, and wish that I'd spent that time honing other skills that would serve me better in later life.
High-end Apple computers have always targeted the producer rather than the consumer. I look back to the days of upgrading graphics cards, heatsinks, power supplies etc, and wish that I'd spent that time honing other skills that would serve me better in later life.
Oh come on, as if you spend more than a few days time combined building PCs. It might be more convenient, but going the Apple route is certainly not cheaper. The PC i have now is really powerful, i built it about a year ago for $1200 and haven't touched the hardware since. Before that i had a PC from 2009 which was still plenty fast and all i upgraded was a SSD and new GPU after 2 years. My Macbook Air was much more expensive because Apple demands high extra cost for upgrading Ram and SSDs. When the PC breaks, i order a new part and have it running again in 2 days, a couple of hours if it's really crucial, while fixing a Mac yourself is nearly impossible these days. I love my Macbook and use it exclusively for work, but your arguments are weak and sound elitist.
I upgraded the SSD in my Macbook Pro Retina myself, using a relatively cheap replacement (not sourced from Apple). As for the RAM, at some future date when 16GB is inadequate, I suspect the graphics card, CPU and bus performance will also be inadequate, so it's better to upgrade the whole lot together and sell the Mac as an unadulterated unit. Mac resale value is far higher than PC kit. It's not a false economy to spend more to get a Mac, if you consider the TCO. Plus, if my Mac has problems, I just take it to one of the many nearby stores. Even out of warranty, they'll do a lot for free.
My arguments sound elitist? That doesn't bother me at all, I'm afraid.
My arguments sound elitist? That doesn't bother me at all, I'm afraid.
Your original argument was about building "PCs at great expense (time and money)". I might agree with the time argument if you get some faulty hardware, but if anything its more down to software than hardware costing time. The TCO argument is fine if you have a perfectly working Mac after X years and sell it, but i usually pass them on to family members for little/no money so that does not apply to everybody. TCO depends on a lot of individual factors and luck (no repairs after warranty), price does not.
I think the 'fair trade' aspects are important and should be universal. I'd also like to see equal concern for 'fair trade' for consumers, who shouldn't have to accept being spied upon.
I've spent months trying to find a reasonably simple way to have a smartphone where I have end-user control over my data and communications, and it seems impossible (without building my own phone or OS).
I know many people don't care; that's fine for them, but I should have the option.
I've spent months trying to find a reasonably simple way to have a smartphone where I have end-user control over my data and communications, and it seems impossible (without building my own phone or OS).
I know many people don't care; that's fine for them, but I should have the option.
I'm eagerly awaiting the market's return to phones that you can actually fit in your human-sized hands. Bigger is not always better.
I recently bought a phone that's so large it takes both hands to operate it. If I'm grasping it reasonably tightly, my thumb can't navigate to over 30% of the screen. If I stretch uncomfortably to try to reach those areas, the phone is likely to slip out of my fingertips entirely. I do not have small hands.
I'm not sure what the market standard definition of "phablet" is, but for me, a 136mm x 68mm device has served me fine for years, and this new device (which I'm returning after almost accidentally throwing it across the train for the n'th time in as many days) is 148mm x 76mm. Apparently that extra ten millimeters is a big deal. (Interesting to look at Apple's product page for their sizes. They measured this too, evidentially -- the 6 and 6s went up to exactly 138x67 and aren't budging; they use the Plus series to probe over that line.)
The fairphone2 is 143x73 -- it's not as big as some other flagships on the market right now, so huge kudos for winning the miniaturization battles so far -- but I bet they're falling prey to competing on screen size, and frustratingly, though I'm interested in everything else about this phone, I'm honestly not sure I'll be able to hold it in my hand.
I recently bought a phone that's so large it takes both hands to operate it. If I'm grasping it reasonably tightly, my thumb can't navigate to over 30% of the screen. If I stretch uncomfortably to try to reach those areas, the phone is likely to slip out of my fingertips entirely. I do not have small hands.
I'm not sure what the market standard definition of "phablet" is, but for me, a 136mm x 68mm device has served me fine for years, and this new device (which I'm returning after almost accidentally throwing it across the train for the n'th time in as many days) is 148mm x 76mm. Apparently that extra ten millimeters is a big deal. (Interesting to look at Apple's product page for their sizes. They measured this too, evidentially -- the 6 and 6s went up to exactly 138x67 and aren't budging; they use the Plus series to probe over that line.)
The fairphone2 is 143x73 -- it's not as big as some other flagships on the market right now, so huge kudos for winning the miniaturization battles so far -- but I bet they're falling prey to competing on screen size, and frustratingly, though I'm interested in everything else about this phone, I'm honestly not sure I'll be able to hold it in my hand.
"I'm eagerly awaiting the market's return to phones that you can actually fit in your human-sized hands. Bigger is not always better."
I never bought a smartphone because I never wanted to carry around huge devices ... for the last few years I have used a motorola F3 ("moto fone")[1]. I loved this phone.
It finally broke, however, so I was forced to buy a modern phone, and I found the Neptune "pine"[2] which is a phone-watch, but you can detach it from the watch band and it essentially becomes a very, very tiny full featured android phone.
I have been using it for about two months and it is great - it's basically a very tiny hotspot device that I use for mobile wifi and bluetooth, etc., and it works great as a phone ... and texting/typing isn't ideal, but it works.
[1] https://en.wikipedia.org/wiki/Motorola_Fone
[2] https://www.kickstarter.com/projects/neptune/neptune-pine-sm...
I never bought a smartphone because I never wanted to carry around huge devices ... for the last few years I have used a motorola F3 ("moto fone")[1]. I loved this phone.
It finally broke, however, so I was forced to buy a modern phone, and I found the Neptune "pine"[2] which is a phone-watch, but you can detach it from the watch band and it essentially becomes a very, very tiny full featured android phone.
I have been using it for about two months and it is great - it's basically a very tiny hotspot device that I use for mobile wifi and bluetooth, etc., and it works great as a phone ... and texting/typing isn't ideal, but it works.
[1] https://en.wikipedia.org/wiki/Motorola_Fone
[2] https://www.kickstarter.com/projects/neptune/neptune-pine-sm...
Looks more lightweight than the last secure phone design I had. The need for dedicated chips for CPU hardening, baseband firewall, and power isolation made it quite bulky. Looking for a commercial model, I settled on this:
https://en.wikipedia.org/wiki/Nokia_9000_Communicator
Didn't build it for obvious reasons. It was the shit back in the day, though, with probably some people willing to buy if they get trusted chips. Not sure enough on return to want to risk it, though.
https://en.wikipedia.org/wiki/Nokia_9000_Communicator
Didn't build it for obvious reasons. It was the shit back in the day, though, with probably some people willing to buy if they get trusted chips. Not sure enough on return to want to risk it, though.
I loved my Motofone too. I've also been thinking a smartwatch might be the best chance for a small phone these days. Thanks for the link to the Pine.
And as someone with freakishly large hands, I welcome large phones.
There are still small phones out there for you. There are large phones out there for me. I am not sure that I see a problem.
There are still small phones out there for you. There are large phones out there for me. I am not sure that I see a problem.
There really aren't small phones out there.
I use a Nokia Lumia 620, a slow, 3-year-old phone with a 3.8" screen. Twice now I've dedicated a week to using only a larger phone (4.5-4.7", so not big by today's standards) and both times at the end of the week I've given up and gone back to the 620.
The two most common things I do with a phone are (a) use it on a train platform or strap-hanging on a train, one-handed, and (b) leave it in a jeans pocket and ignore it. Even an iPhone 5 is really a bit too big to be a happy device to use like that.
(Previously I had a Nokia 700, with a 3.2" screen. That was fantastic, best phone hardware I've ever used, but it ran Symbian and eventually became too poorly-supported to stick with)
What I'd really like to see is a phone of the same size and shape as a 3rd gen iPod touch -- so like a thin version of an iPhone 3G. Maybe one day the market will swing back that way, and hopefully when it does, it'll be with a bit more choice so we can have big or small, rather than producing a hundred-and-fifty examples of devices all basically the same size.
I use a Nokia Lumia 620, a slow, 3-year-old phone with a 3.8" screen. Twice now I've dedicated a week to using only a larger phone (4.5-4.7", so not big by today's standards) and both times at the end of the week I've given up and gone back to the 620.
The two most common things I do with a phone are (a) use it on a train platform or strap-hanging on a train, one-handed, and (b) leave it in a jeans pocket and ignore it. Even an iPhone 5 is really a bit too big to be a happy device to use like that.
(Previously I had a Nokia 700, with a 3.2" screen. That was fantastic, best phone hardware I've ever used, but it ran Symbian and eventually became too poorly-supported to stick with)
What I'd really like to see is a phone of the same size and shape as a 3rd gen iPod touch -- so like a thin version of an iPhone 3G. Maybe one day the market will swing back that way, and hopefully when it does, it'll be with a bit more choice so we can have big or small, rather than producing a hundred-and-fifty examples of devices all basically the same size.
There aren't really many decent small phones. I have a first-gen Moto E, and it's about as big I as I'd like, but the new versions are larger. Same with the Moto X. The best current options seem to be the Sony Xperia Zx Compact series. Everything else small is also very low-end, with bad screens, too-small storage and old software.
Whats wrong with using two hands ? These are not dumb phones but multi purpose computing devices. If you make/take calls for several hours a day a phablet is probably not the right device, but even then you can comfortably use earbuds with a built-in mic.
If you want to read standing in the subway/metro you need one hand on the handle and then there's only one left for handling and navigating. I suppose there is a myriad of other small use cases where one handled use is necessary or more convenient.
try reading a real book or on a kindle in that situation, would be even more inconvenient.
If the goal is reliability, modularity may not be the right way to get there. Why not just build something tough enough that it doesn't break? There are militarized rugged smartphones.[2] You will break before they do.[3] If you bend the frame on your modular repairable smartphone, you can't fix it anyway.
If the goal is upgradability, you don't just need modularity. You need a whole ecosystem building components to some standard. The Fairphone doesn't have that. Google, in 2014, was talking about an upgradable modular phone held together by magnets. It didn't work very well; if dropped, it fell apart.[4]
IFixit likes it if you can unscrew and replace every part. This does help maintainability. But do you want to go there? Here's the extreme case of that - a Model 15 Teletype. Every small part, of about 2000 of them, is replaceable. Here's repairing a damaged Model 15 from a dumpster, something I did last year.[1] Just because you can doesn't mean it's an effective use of time.
Phones should Just Work. Make them indestructible, not field-modifiable.
[1] http://brassgoggles.co.uk/forum/index.php/topic,43672.0.html [2] http://www.catphones.com [3] https://www.youtube.com/watch?v=mVPku-xItv8 [4] http://www.techtimes.com/articles/77985/20150819/googles-pro...
If the goal is upgradability, you don't just need modularity. You need a whole ecosystem building components to some standard. The Fairphone doesn't have that. Google, in 2014, was talking about an upgradable modular phone held together by magnets. It didn't work very well; if dropped, it fell apart.[4]
IFixit likes it if you can unscrew and replace every part. This does help maintainability. But do you want to go there? Here's the extreme case of that - a Model 15 Teletype. Every small part, of about 2000 of them, is replaceable. Here's repairing a damaged Model 15 from a dumpster, something I did last year.[1] Just because you can doesn't mean it's an effective use of time.
Phones should Just Work. Make them indestructible, not field-modifiable.
[1] http://brassgoggles.co.uk/forum/index.php/topic,43672.0.html [2] http://www.catphones.com [3] https://www.youtube.com/watch?v=mVPku-xItv8 [4] http://www.techtimes.com/articles/77985/20150819/googles-pro...
Actual phone cost 12K. Repairing cost 13K (INR)
I would like to share a terrible experience which I had with Micromax. I got a brand new phone Micromax Canvas A350 (2GB ram, Octa core processor) as a gift.
After a week of use I accidentally dropped the phone and broke the screen. I took it to Micromax service center and they asked me for 6K to change the screen. Since the warranty does not cover these type of damages.
A local repairing shop fixed the screen for 2K but now the warranty is violated. After a month of use power button failed and GSM signal receiving is too weak. I opened to phone to see that the antina wire was broken. (which connected GSM module to the mother board)
I took the phone to Micromax customer care they gave me a list of things to replace: Whole case + GSM module. Total cost : 7K + 6K = 13K.
Only things broken was a power button and a simple wire which will not even cost 10 INR. The cost of a new phone is only 12K
I would like to share a terrible experience which I had with Micromax. I got a brand new phone Micromax Canvas A350 (2GB ram, Octa core processor) as a gift.
After a week of use I accidentally dropped the phone and broke the screen. I took it to Micromax service center and they asked me for 6K to change the screen. Since the warranty does not cover these type of damages.
A local repairing shop fixed the screen for 2K but now the warranty is violated. After a month of use power button failed and GSM signal receiving is too weak. I opened to phone to see that the antina wire was broken. (which connected GSM module to the mother board)
I took the phone to Micromax customer care they gave me a list of things to replace: Whole case + GSM module. Total cost : 7K + 6K = 13K.
Only things broken was a power button and a simple wire which will not even cost 10 INR. The cost of a new phone is only 12K
10K Indian Rupee (INR) ~ USD $150.
I'm fairly sure the bootloader fuse will still be blown on this as it's a retail Qualcomm board - no bootloader upgrades for you.
> the bootloader fuse will still be blown on this
What does that mean?
What does that mean?
Practically nothing in this case. In the case of a phone like the S6, Samsung detects if the fuse is blown, indicating modification by the user, and will disable certain features, fingerprint reader, Samsung Pay, etc..
Maybe I've got it wrong in my head, I thought it disallowed modification of the stage 1 loader (in the case of the Nexus 4 and 5, it's LK)
I like the idea. The execution, on the other hand, not so much (especially compared to Ara project, from the pictures seen so far).
From the animation on FairPhone site, I counted 17 screws and 6 standoff. How many people, who would not even try to repair their phone will find this easy enough to start repairing their phone?
For comparison sake, there are 10 screws on a Nexus 5 (according iFixit teardown). Sure, the Nexus 5 (or other smartphone) will be a little harder to repair. But the difference is far from huge, and won't make someone take a FairPhone over another "good enough" smartphone, repairability-wise.
The upgrade ability? Sure, it might be nice. But, as the PC market as demonstrated (which has a lot less contraints, too), you can only go so far, until you need to replace the whole thing. Since it's not a well-established project, it's not even a sure-bet you'll still find parts at an affordable price in a few years time. And at that price point, it's not a given that FairPhone + upgrades in a few years costs less than one similar phone now, and a similar to the upgraded in a few years.
That leaves social impact and openness principles. That might appeal to part of the geeky crowd (the ones that buys Librem), and social-aware persons, if they are not turned off by the price. Let's see if it's enough to sustain a smartphone line. In the current saturated market, I have some doubts.
From the animation on FairPhone site, I counted 17 screws and 6 standoff. How many people, who would not even try to repair their phone will find this easy enough to start repairing their phone?
For comparison sake, there are 10 screws on a Nexus 5 (according iFixit teardown). Sure, the Nexus 5 (or other smartphone) will be a little harder to repair. But the difference is far from huge, and won't make someone take a FairPhone over another "good enough" smartphone, repairability-wise.
The upgrade ability? Sure, it might be nice. But, as the PC market as demonstrated (which has a lot less contraints, too), you can only go so far, until you need to replace the whole thing. Since it's not a well-established project, it's not even a sure-bet you'll still find parts at an affordable price in a few years time. And at that price point, it's not a given that FairPhone + upgrades in a few years costs less than one similar phone now, and a similar to the upgraded in a few years.
That leaves social impact and openness principles. That might appeal to part of the geeky crowd (the ones that buys Librem), and social-aware persons, if they are not turned off by the price. Let's see if it's enough to sustain a smartphone line. In the current saturated market, I have some doubts.
>From the animation on FairPhone site, I counted 17 screws and 6 standoff. How many people, who would not even try to repair their phone will find this easy enough to start repairing their phone?
So we developed into society where 17 screws is such a major problem to deal with it... Also people who wouldn't not even try to repair their phone will not try even if there is no screw.
In my opinion such phone should appeal to what you call geeky crowd and from there it should initiate some social change (probably via media such as Internet) where changing 17 screws will not be difficult task but highly rewarding in terms of being human and hardware/cost wise. After that it should spread to people and with it the hardware becomes industrial standard (parts at least) so the price of changing goes down both in cost and finding them.
So we developed into society where 17 screws is such a major problem to deal with it... Also people who wouldn't not even try to repair their phone will not try even if there is no screw.
In my opinion such phone should appeal to what you call geeky crowd and from there it should initiate some social change (probably via media such as Internet) where changing 17 screws will not be difficult task but highly rewarding in terms of being human and hardware/cost wise. After that it should spread to people and with it the hardware becomes industrial standard (parts at least) so the price of changing goes down both in cost and finding them.
If we really want to get serious about keeping our phones for more than a few years, we need to solve the problem of software bloat. I would love to see an open ecosystem with some sort of distributed benchmark so apps are strongly incentivized to be implemented efficiently. Which of the 1,000 egg timer apps should you pick? The one that doesn't run out your battery before the egg is cooked! But how on earth do you even know which one that is in the current ecosystem?
On iOS, I find that it's mostly the OS that becomes unusable. However, that's an interesting idea.
[deleted]
Looks like about the same price as a Nexus 5X in Australia, excluding shipping.
Wouldn't it be more environmentally friendly to keep my current phone or to buy a second hand one?
Wouldn't it be more environmentally friendly to keep my current phone or to buy a second hand one?
The order page states "Designed for use and service in Europe only". Hang on to the Nexus 5 :)
Good question, keeping is probably more environmentally friendly. I'm not sure about the second hand market. As by buying one there, you'd give the previous owner some capital and him selling in the first place, could indicate that this capital will be used for a new phone. So what's the chance that the former owner will buy a fairphone? If it's lower than yours, you'd better buy a fairphone yourself. (in terms of environmental impact)
It's a first good step.
What I want is freedom of PC hardware of the 1990s in a smaller form factor. A smartphone consists of a system-on-chip (SoC) computer, memory chip, modem, display, cameras, antennas, sensors, card slots, battery - all could be modular. And be of a convinient form factor so that several companies offer such parts.
Android took the omnipresence role of Windows 95 on smartphones and tablets (though Android device driver are hard to find).
Back in 2006 I had a modular notebook built by an OEM sold under different brands. (picture: http://p-fst1.pixstatic.com/51b62f6dfb04d67b66000b29._w.540_... ) What a great hardware platform.
In 2016 the notebook market is in a bad shape - business notebooks: lower build quality (no Thinkpad robustness), higher prices and no modular notebook platform. And on PC the trusted computing (UEFI, GPT, Palladium) accelerated by Microsoft is hostile to non-Windows 8+ operating systems. Hopefully, the EFF can do something there.
What I want is freedom of PC hardware of the 1990s in a smaller form factor. A smartphone consists of a system-on-chip (SoC) computer, memory chip, modem, display, cameras, antennas, sensors, card slots, battery - all could be modular. And be of a convinient form factor so that several companies offer such parts.
Android took the omnipresence role of Windows 95 on smartphones and tablets (though Android device driver are hard to find).
Back in 2006 I had a modular notebook built by an OEM sold under different brands. (picture: http://p-fst1.pixstatic.com/51b62f6dfb04d67b66000b29._w.540_... ) What a great hardware platform.
In 2016 the notebook market is in a bad shape - business notebooks: lower build quality (no Thinkpad robustness), higher prices and no modular notebook platform. And on PC the trusted computing (UEFI, GPT, Palladium) accelerated by Microsoft is hostile to non-Windows 8+ operating systems. Hopefully, the EFF can do something there.
Have you considered the pi-top (http://www.pi-top.com)? It sounds like it has many of the features you are looking for.
This phone is too expensive for me right now but this is utterly excellent: http://shop.fairphone.com/catalog/category/view/id/10
Assuming those are all the parts one needs to construct a full phone, you save around 50% of the list of the assembled unit by building it yourself.
That list are the parts of the FP-1, which is an entirely different phone than the recently unveiled second generation. And a much cheaper one, even when it was new, so there is definitely no hidden self-assemble bargain. But things certainly do look good for repair!
Apple is absolute nightmare, but most other makers have pretty serviceable products.
Checkout youtube videos for Samsung or Lenovo phones. In amateur conditions it takes about 10 minutes to replace "build-in" battery. Or 30 minutes to replace broken glass or motherboard.
Checkout youtube videos for Samsung or Lenovo phones. In amateur conditions it takes about 10 minutes to replace "build-in" battery. Or 30 minutes to replace broken glass or motherboard.
That's a bogus argument. Any flagship phone from Samsung or Lenovo will make the same tradeoffs that Apple does between thinness/weight and user-servicability.
In any case, you suggest Samsung/Lenovo phones take 10 minutes for a battery replacement. The iPhone 6 takes just four minutes:
https://www.youtube.com/watch?v=UgmtNJuqEHI
In any case, you suggest Samsung/Lenovo phones take 10 minutes for a battery replacement. The iPhone 6 takes just four minutes:
https://www.youtube.com/watch?v=UgmtNJuqEHI
"The iPhone 6 takes just four minutes"
Jesus, it's gotten that bad...?
Jesus, it's gotten that bad...?
[deleted]
I am looking forward for the similar idea for cars to be realised.
good news, it's already like this. you can buy parts and replace them yourself :O
you don't get it...
But it looks to me that all of the actual functions of the phone are integrated into one big SoC.
That misses the entire point of a modular computing device - phone or otherwise.
I want a wireless comms module (which contains not just the wifi/bt/cellular antennas, but the chipset itself) that I can remove or hard disable with a switch.
I want an inputs module that contains not just the mic and speaker, but their enabling circuitry so I can remove it or hard disable it with a switch.
I want a GPS module ... a USB ports module ... a camera module.
That's what a modular smartphone is all about. There's nothing modular about a big monster (closed, telco-owned, user-hostile) SoC that contains all of the actual functions.