An airport-inspired puzzle from Terence Tao(terrytao.wordpress.com)
terrytao.wordpress.com
An airport-inspired puzzle from Terence Tao
http://terrytao.wordpress.com/2008/12/09/an-airport-inspired-puzzle/
5 comments
The comment by Harald Hanche-Olsen has the best explanation.
As far as the non-relativistic version of the question, I'm pretty sure it makes no different if you pause while on or off. Both for question #1 and #2 - it makes not difference.
Relativistically I'm not sure, but I think it's best to pause while on the walkway, since while running on the walkway most of your energy goes to increasing your mass rather than your speed.
Relativistically I'm not sure, but I think it's best to pause while on the walkway, since while running on the walkway most of your energy goes to increasing your mass rather than your speed.
I thought that too until I made up a simple example and worked through the numbers. Lets say you have a
100 ft non-walkway
400 ft walkway
you walk at 10 ft/s and the walkway moves at 10ft/s
it takes 10 s to tie your shoes.
Case 1
tie your shoes 10s
walk 100ft 10s
walkway 400 ft (400/(10+10)) 20s
Total 40s
Case 2
Walk 100 ft 10s
Tie shoes on walkway 10s (in which time you travel 100ft)
Rest of Walkway 300/(10+10) 15s
Total 35s
100 ft non-walkway
400 ft walkway
you walk at 10 ft/s and the walkway moves at 10ft/s
it takes 10 s to tie your shoes.
Case 1
tie your shoes 10s
walk 100ft 10s
walkway 400 ft (400/(10+10)) 20s
Total 40s
Case 2
Walk 100 ft 10s
Tie shoes on walkway 10s (in which time you travel 100ft)
Rest of Walkway 300/(10+10) 15s
Total 35s
Suppose there is one conveyor belt that goes all the way from A to B. You could pause the whole time on the belt and arrive at the destination, whereas if you pause off the belt all the time you'll never get there. So pausing has to make a difference ;-)
> As far as the non-relativistic version of the question, I'm pretty sure it makes no different if you pause while on or off.
Nope.
Nope.
Is this going to become like that thing about airplanes on treadmills that move backward at the same speed as the plane, where everyone is 100% sure they have it right?
I see the reasoning that if you walk on the treadmill you enjoy it's speed for less time - but that's not what you care about. You care about how long it takes you to get from the start of the treadmill to the end, and if you walk you get to the end faster.
So if you can walk 100 meters in 1 minute, and that's what you do on the treadmill, you will have covered an extra 100 meters in 1 minute.
Or you could cover that 100 meters on the ground, and it will also take you 1 minute.
The speed of the conveyor makes no difference - that is totally fixed, the only difference is do you cover that 100 meters on the conveyor or off of it.
I typed and rejected many examples to give you, but none were intuitive. So if it's this hard to explain then I'm 100% sure this is going to become like that airplane on a conveyor belt.
People are going to argue about this forever.
What is it about conveyor belts that makes it hard for people?
I see the reasoning that if you walk on the treadmill you enjoy it's speed for less time - but that's not what you care about. You care about how long it takes you to get from the start of the treadmill to the end, and if you walk you get to the end faster.
So if you can walk 100 meters in 1 minute, and that's what you do on the treadmill, you will have covered an extra 100 meters in 1 minute.
Or you could cover that 100 meters on the ground, and it will also take you 1 minute.
The speed of the conveyor makes no difference - that is totally fixed, the only difference is do you cover that 100 meters on the conveyor or off of it.
I typed and rejected many examples to give you, but none were intuitive. So if it's this hard to explain then I'm 100% sure this is going to become like that airplane on a conveyor belt.
People are going to argue about this forever.
What is it about conveyor belts that makes it hard for people?
OK, the post below made it easier to me to explain: You can NOT add miles per hour to miles per hour. So you can not add the speed to walking to the speed of the belt.
You need to do hours per mile + hours per mile.
So the conveyor takes a certain number of hours for each mile, and you walking takes a certain number of hours for each mile.
The length of the conveyor is fixed. So the number of hours the conveyor supplies is fixed - nothing you can do will change that. You can add in your hours per mile on it or off of it, it doesn't matter - it's exactly the same in total.
You need to do hours per mile + hours per mile.
So the conveyor takes a certain number of hours for each mile, and you walking takes a certain number of hours for each mile.
The length of the conveyor is fixed. So the number of hours the conveyor supplies is fixed - nothing you can do will change that. You can add in your hours per mile on it or off of it, it doesn't matter - it's exactly the same in total.
Well like the airplane on the conveyor belt thing, there really is a right answer to this and you don't have it. This is a similar explanation to one of the comments on the blog: imagine one section of ground followed by one section of conveyor belt. Two people going exactly the same speed walk along the ground section and one stops just before the conveyor belt and one stops on the conveyor belt. They both stop for the same time. When they resume walking the one who stopped on the conveyor belt is ahead. No matter how many section of belt and ground follow this, the one behind will never catch up.
No, that's not correct.
You forgot that they both have to get off the conveyor belt at some point.
The guy who got on first will then walk slowly, and the guy who got on second meanwhile will be both walking and being pulled forward by the conveyor belt, while the first guy is walking slowly. This will catch him up to the first guy.
And if you tell me that the first guy is already walking so of course he's ahead, then you forgot that, for both of them to stop at the same time, and yet one be on the belt and one on the ground, the first guy must have had a head start.
Better have two belts, one placed one meter ahead of the other. So, one guy will be walking for that meter, while the other will be riding the belt and walking, and both will reach the end at exactly the same time.
You forgot that they both have to get off the conveyor belt at some point.
The guy who got on first will then walk slowly, and the guy who got on second meanwhile will be both walking and being pulled forward by the conveyor belt, while the first guy is walking slowly. This will catch him up to the first guy.
And if you tell me that the first guy is already walking so of course he's ahead, then you forgot that, for both of them to stop at the same time, and yet one be on the belt and one on the ground, the first guy must have had a head start.
Better have two belts, one placed one meter ahead of the other. So, one guy will be walking for that meter, while the other will be riding the belt and walking, and both will reach the end at exactly the same time.
It's confusing alright. When the guy in the lead gets off the conveyor belt the distance between them will close. But the second guy won't catch up. The distance between them will vary according to speed but the time between them will stay the same.
I concede. You are right, it's better to pause on the belt. I thought about it all night, using edge cases, like a really slow walker, fast belt, etc.
I have no idea if this is right or not, but I just thought I'd mention how I conceptualized the problem: I thought of the distance from point A to B as Y. I thought of walkways as simply devices that reduced Y by n times t. n is the velocity of the walkway and t was the time spent on it.
Therefore one would want to maximize t while maintaing the highest possible average walking/running speed. E.g. it might not make sense for me to stand still on the walkway but I'd tie my shoes on it and try to reserve sprinting for regular surfaces.
Therefore one would want to maximize t while maintaing the highest possible average walking/running speed. E.g. it might not make sense for me to stand still on the walkway but I'd tie my shoes on it and try to reserve sprinting for regular surfaces.
You know that classic problem: You are going to a city 50 miles away. Would it be faster to travel there and back at 30mph, or at 40mph leaving and 20mph returning. (hint: http://en.wikipedia.org/wiki/Harmonic_mean)
If you ever need to solve such a thing just swap miles per hour to hours per mile:
So .0333 + .0333 = .0666 (i.e. it would take you .0666 hours for each mile you need to cover). Or .025 + .05 = .075
Clearly the second is better.
So .0333 + .0333 = .0666 (i.e. it would take you .0666 hours for each mile you need to cover). Or .025 + .05 = .075
Clearly the second is better.
In the first case, you go faster when you pause on the treadmill, and the time required does not change if you run on or off the treadmill.
Those seem like the intuitive solutions to me.
Those seem like the intuitive solutions to me.
[deleted]
2. its better to run off the walkway. Why? Walking normally is more expensive (in terms of time required to cover N distance) than walking on the walkway. The question can be rephrased as, all things considered, "would you rather spend less time on the walkway or the ground?" You would rather spend less time on the ground, because it takes you more time to cross it.
Naive proof: your normal speed is 1m/s, run speed is 2m/s (can be done for 1s), walkway moves at 1m/s. Track is: 2m of ground, 6m of walkway.
Running on walkway: 2s to cover ground, 1s to cover first 3 meters of walkway running, 1.5s to cover last three meters = 4.5s. Running on ground: 1s to cover ground, 3s to cover walkway = 4s.
Look at it this way: the normal (no-run) time is 5s. Running on the ground chops off an entire second; running off the walkway chops off only half a second.