ZX81plus38 – A ULA-less ZX81 clone(github.com)

74 pointsby nicktvor 4 Jahren27 comments

https://github.com/mahjongg2/ZX81plus38

7 comments

Took me a bit of research to figure out that ULA is "Uncommitted Logic Array"

hvsvor 4 Jahren

A similar project has been created to make a ULA-less ZX Spectrum 128K: https://github.com/DonSuperfo/Superfo-Harlequin-128

There are a number of 48K clones as well.

ngcc_hkvor 4 Jahren

Amazing 66 years old after a long covid (without he remembered getting one). Do not have anything to cheer him up.

Just word: you are amazing.

ur-whalevor 4 Jahren

What does ULA stand for?

sveissvor 4 Jahren

Uncommitted Logic Array.

It was a semi-custom chip type, where the silicon layer was standardised but the metal layers varied by customer.

https://en.wikipedia.org/wiki/Gate_array

rwmjvor 4 Jahren

Just want to add that they're very common on 1980s computers in Britain. Sinclairs and Amstrads have them. And that they often fail and are very hard to replace. Essentially you end up taking one from another machine, so the stock of working machines declines over time.

aeaa3vor 4 Jahren

Would it be possible to recreate the ULA logic in a modern FPGA? And if so, to use it as a direct replacement in an original Sinclair/Amstrad?

johnklosvor 4 Jahren

Not only possible, but doable. Not only doable, but already done :)

https://www.sellmyretro.com/offer/details/vla81-%3A-a-replac...

https://www.sellmyretro.com/offer/details/vla82-%3A-a-replac...

kralljavor 4 Jahren

Yes, but at that point, couldn't you put the rest of the device in the FPGA too?

rwmjvor 4 Jahren

Yup! https://github.com/MiSTer-devel/ZX81_MiSTer

0x0vor 4 Jahren

Apparently it was a custom chip for the various sinclair (zx/spectrum) computers.

* http://www.retroisle.com/sinclair/zx81/Technical/Hardware/cu... * https://www.bytedelight.com/?page_id=2678 * https://spectrumforeveryone.com/technical/zx-spectrum-ula-ty...

dborehamvor 4 Jahren

Product name for gate array at Ferrari semiconductor.

christkvvor 4 Jahren

Now that is a company that had a wild ride. It could have become the Xilinx instead it ended up with a wild story involving illegal arms exports and other insane stuff.

predictsoftvor 4 Jahren

Ferranti.

rwmjvor 4 Jahren

The ZX81 was a ZX80 with all the 74LS chips boiled down to a ULA (and the "New ROM"), so in a way this is a ZX80 :-)

(I love these kinds of projects.)

dfawcusvor 4 Jahren

It was possible to add SLOW mode to the ZX80 with a minor circuit addition [1][2], and upgrade 8k ROMs to provide ZX81 capabilities were available[3][4][5].

[1] http://web.archive.org/web/20031006130728/http://home.micros...

[2] https://www.myprius.co.za/ZX80.htm

[3] http://qrp.gr/zx80/romupgrade.htm

[4] http://www.fruitcake.plus.com/Sinclair/ZX80/ROMUpgrade/ZX80_...

[5] http://qrp.gr/zx80/romupgrade2.htm

klelattivor 4 Jahren

Very good point! Didn't the ZX81 add a few things though? It had a CPU based video driver driven by interrupts IIRC so the screen didn't flash all the time when it was working - very, very slow though.

rwmjvor 4 Jahren

I'm not entirely certain. I know you could upgrade the ZX80 by installing the "New ROM", and I believe that was basically just the ZX81 ROM. Not clear if that gave you everything in a ZX81 such as SLOW MODE (see other replies).

klelattivor 4 Jahren

IIRC flicker free depends on NMI from the ULA eg see

> The ULA contains a 6.5 MHz crystal oscillator and a frequency divider which generates horizontal sync pulses at the video output and NMI pulses on the NMI output.

From

https://8bit-museum.de/heimcomputer-2/sinclair/sinclair-scan...

johnklosvor 4 Jahren

The ZX81 added SLOW mode, which was a big improvement. SLOW mode can be added to the ZX80, which is what was done with the ZX81plus38.

m0lluskvor 4 Jahren

> ... I don't remeber ever having a case of covid, but I do suffer from the same symptoms. I'm 66 now (2021/2022) so I don't see myself getting a job anymore, and consider myself retired.

Really touching to persist with this. Hopefully this work does not all suddenly disappear when mortality takes its inevitable toll.

denton-scratchvor 4 Jahren

ZX80/ZX81 were horribly compromised devices, designed to minimise cost based on the components available at the time. I'm not sure why someone would want to emulate one (I could understand replicating one, I guess). Using modern chips, you can build a much more exciting toy for a lot less money.

spzbvor 4 Jahren

ZX81 was the first computer I ever used. I learnt to code on it. It led me down the path that made me gainfully employed all my adult life. It might have been built to a price point but that price point meant it could be afforded by my family and the rest is history.

rwmjvor 4 Jahren

Because why not? What's wrong with doing a totally pointless hobby?

BTW there's a decent ZX81 FPGA reimplementation in the MiSTER: https://github.com/MiSTer-devel/ZX81_MiSTer

ngcc_hkvor 4 Jahren

Whilst the purpose might be, the process is great for some learning and for an old man it is great.

If it can simplify might even tell a story, a book etc on how to start from 0 on building your own cpu.

lprovenvor 4 Jahren

I think because they are simple enough to understand, to design and build without pro-level skills, and there's quite a bit of software, documentation, and even peripherals out there.

E.g. the Tynemouth Software kits:

https://www.thefuturewas8bit.com/shop/tynemouth-products.htm...

pinewurstvor 4 Jahren

Nostalgia takes no prisoners.