How to write to stderr so people will like you(utcc.utoronto.ca)
utcc.utoronto.ca
How to write to stderr so people will like you
http://utcc.utoronto.ca/~cks/space/blog/programming/HowToWriteToStderr
8 comments
If you can't recompile the program, an expect script will come very handy:
$ ./unbuffer ./tst >/tmp/logit 2>&1; cat /tmp/logit
line 1
stderr line 1
line 2
stderr line 2
This is a nice paradigm when it works, however for programs that are often piped to other programs, I believe this can run into issues with the flush on stdout blocking. Am I wrong here?
I looked up the man page for C's fflush(). One of the error messages is EPIPE, "An attempt is made to write to a pipe or FIFO that is not open for reading by any process. A SIGPIPE signal shall also be sent to the thread."
So, at least in C, I think flushing is intelligent enough not to block if no one's receiving the output.
So, at least in C, I think flushing is intelligent enough not to block if no one's receiving the output.
I am not sure what you are referring to, but the case where EPIPE is useful is incase you do something like:
This will also send the SIGPIPE signal which by default will kill the process, so grep is automatically terminated when no more output will be read from it.
grep foo *.txt|head -n10
This will also send the SIGPIPE signal which by default will kill the process, so grep is automatically terminated when no more output will be read from it.
I'm not talking about no one receiving output. I'm talking about this case:
You write a program called "thefirstprogram". Who cares what it does. However, a user is pushing its (standard) output into a second program called "asecondprogram". Now imagine "asecondprogram" has melted, but not terminated. It's basically in a screwed up state.
So the run command was:
bash-2.04> thefirstprogram | asecondprogram
I believe the flushing scheme advocated in the article is to be considered harmful, as you will in fact never see an error message if asecondprogram gets in a bad state and stops reading from stdin (and the buffers fill up).
I do agree the flushing makes for nicer ordering of error messages, but is more fragile.
Only used flushed output when you really need flushed output otherwise you'll get less resilience in the case of meltdown of cooperating programs.
You write a program called "thefirstprogram". Who cares what it does. However, a user is pushing its (standard) output into a second program called "asecondprogram". Now imagine "asecondprogram" has melted, but not terminated. It's basically in a screwed up state.
So the run command was:
bash-2.04> thefirstprogram | asecondprogram
I believe the flushing scheme advocated in the article is to be considered harmful, as you will in fact never see an error message if asecondprogram gets in a bad state and stops reading from stdin (and the buffers fill up).
I do agree the flushing makes for nicer ordering of error messages, but is more fragile.
Only used flushed output when you really need flushed output otherwise you'll get less resilience in the case of meltdown of cooperating programs.
What?!
If the second program is messed up, it makes no difference if you flush or not. You'll still never see an error message.
Stdin will fill up, flush or not, the program will block, and then sit there - no error message.
You could maybe detect if stdin is blocked and say something on stderr - but if you want to do that it makes no difference whatsoever if you flush stdout or not.
If the second program is messed up, it makes no difference if you flush or not. You'll still never see an error message.
Stdin will fill up, flush or not, the program will block, and then sit there - no error message.
You could maybe detect if stdin is blocked and say something on stderr - but if you want to do that it makes no difference whatsoever if you flush stdout or not.
No, stderr isn't being piped with that command. So you will see it printed out on the command line.
You have to explicitly pipe stderr as well if you don't want this behavior
You have to explicitly pipe stderr as well if you don't want this behavior
You don't understand. Once stdout blocks the whole program blocks, so it makes no difference that stderr is not piped. The program is stopped, it won't be making any errors.
Obviously you could make some complicated buffering scheme - but you can do that and flush things anyway. The flush or no flush makes no difference.
Obviously you could make some complicated buffering scheme - but you can do that and flush things anyway. The flush or no flush makes no difference.
Only if you're using blocking IO. Just set O_NONBLOCK if you don't want blocking IO.
AKA "some complicated buffering scheme". Without blocking IO you have to buffer the output locally.
Or just stop processing....
You're picking nits frankly. The system can be useful. But it does deadlock and/or cause delays if your output program stops reading from the pipe temporarily or permanently. The deadlocked secondprogram was just a simple example of when this happens.
This sort of behavior is a rare case. It is far from rare though in a less degenerate form. In the very simple case of displaying text on the command line you will fill your output buffer all the time, but with the flushes, you'll vastly slow the program down to the speed of text display in your terminal as you make all text output every time, as opposed to just when the buffer display program runs.
Which do you think will run faster: Cat without those flushes or cat with those flushes?
This technique is not universally applicable, as the article says. It does not fit all cases. It has costs.
It does also have applications. But it's not the suggested universal technique.
You're picking nits frankly. The system can be useful. But it does deadlock and/or cause delays if your output program stops reading from the pipe temporarily or permanently. The deadlocked secondprogram was just a simple example of when this happens.
This sort of behavior is a rare case. It is far from rare though in a less degenerate form. In the very simple case of displaying text on the command line you will fill your output buffer all the time, but with the flushes, you'll vastly slow the program down to the speed of text display in your terminal as you make all text output every time, as opposed to just when the buffer display program runs.
Which do you think will run faster: Cat without those flushes or cat with those flushes?
This technique is not universally applicable, as the article says. It does not fit all cases. It has costs.
It does also have applications. But it's not the suggested universal technique.
Sigh.
And the difference between "stop processing" and letting the IO block is what?
And the difference between "stop processing" and letting the IO block is what?
You can do other things....like say, print out on stderr that there is a problem after a certain timeout, email technical support, or restart the second program.
If you use blocking IO, you just silently fail.
If you use blocking IO, you just silently fail.
Won't it just get buffered into the other program's input buffer?
I believe pipes are block-buffered and basically look just like redirecting to a file.
I believe pipes are block-buffered and basically look just like redirecting to a file.
If the process you're piping to never reads stdin and your process writes to stdout with a blocking write, you will eventually be blocked. But just use an event loop for stdout, and all will be well. (That way your program is in control of its own buffering and blocking. select is probably good enough in this case.)
Anyway, if you want to see freakin' echo block because of this, try:
Anyway, if you want to see freakin' echo block because of this, try:
$ mkfifo foo
$ echo "OH HAI" > foo
<blocks>
$ cat foo
The potential problem comes when stdout and stderr are going to different places. For instance stdout is going to the next stage in a pipeline while stderr is going to the console. Then the error message winds up waiting for the buffering program.
Yes exactly. This is the scenario I'm worried about. It's pretty common actually (think logging, etc)
If that happens, it's supposed to block, so let it.
So yes, you are wrong here.
So yes, you are wrong here.
imho better way to solve this 'problem' would be to write error messages in such way that you don't need stdout as context to interpret them.
"(Note that programs that run other programs need to do more than just this; they need to flush stdout and perhaps stderr before they start another program.)"
Could someone explain exactly why this is?
Could someone explain exactly why this is?
Because you want to make sure your output is sent before the possible output from a child program. This is the same principle as from the article.
Because if they start another program without flushing their buffers, you'll have the output from the new program before the output from the old program, despite the fact that chronologically, the errors were generated before it started.
a good practice is not to combine stdout and stderr into the same output when the ordering matters. You'll get a different result depending on the shell you are using.
Erm... if the problem is that stdout may be fully buffered, just set it to line buffered explicitly? (See setbuf(3) and friends.)
(Note that only stdout is the issue, see ready's comment.)
(Note that only stdout is the issue, see ready's comment.)
I'm in the habit of using doing a setbuf(stdout,NULL) in the beginning of all my console apps, anyway. Buffered console I/O is something that made sense 20 years ago but certainly not anymore.
If you did a setbuf(stderr,NULL) as well as setbuf(stdout,NULL), you'd achieve the same effect that the author's going for, with no need to remember to flush.
If you did a setbuf(stderr,NULL) as well as setbuf(stdout,NULL), you'd achieve the same effect that the author's going for, with no need to remember to flush.
It really depends on how much data you need to write to stdout. If you're writing a single character at a time with no buffering, many terminal programs (GNOME terminal, etc.) will struggle to put out more than a few dozen lines per second, which can significantly slow down your program (I've known people who redirect their cc's stdout to /dev/null to avoid terminal latency slowing the build).
Standard Error is unbuffered: http://www.opengroup.org/onlinepubs/009695399/functions/stdi...
"When opened, the standard error stream is not fully buffered; the standard input and standard output streams are fully buffered if and only if the stream can be determined not to refer to an interactive device."