f({ hours: 2, seconds: 53, ..Default::default() })
The defaults could come from some value / function with a name shorter than Default::default(), but it would be less clear. - Data is divided into 512 byte blocks, which lines up with the mass storage transfer size.
- Each block has an identifying magic sequence, a payload address, and size, which can be used to identify the destination.
- This allows the emulated storage to ignore metadata blocks and to handle out-of-order and repeated blocks. - Start timestamp with resolution down to the minute
- Watching duration with resolution down to the second
- The reason you watched it (e.g auto play or not)
- If the thing was one of those autoplaying trailers, as opposed to a real video
- What Netflix client type you used (e.g browser vs smart TV vs phone)
- At what timestamp you stopped watching
I've used it to summarize the series I was watching from week-to-week and how much time I sank into each show.
1. There are no EU-wide regulations restricting on BPA concentrations in electronics devices.
2. The ECHA has proposed for limits is 10mg/kg which is also used for the OEKO-TEX Standard 100.
3. In the study's evaluation criteria, for parts to achieve a green rating for bisphenols, the concentration has be below 0.8mg/kg for parts touching the skin and below 10mg/kg for parts not touching the skin.
4. 69% of the tested samples achieved a green rating for bisphenols.
So while there is a gap in regulations ensuring a safe baseline for electronics, the majority of the tested headphones are doing okay as far as bisphenol exposure even under the proposed guidelines.